Take the output from each bandpass filter and run it to pin 1 of a
pot, pin 2 goes to the summing resistor for the "partial summing amp",
and pin 3 goes to ground. Normally, each bandpass filter goes directly
to the summing resistor, I just put a pot in there so that I can "dial
in" the contribution from each filter.
pot, pin 2 goes to the summing resistor for the "partial summing amp",
and pin 3 goes to ground. Normally, each bandpass filter goes directly
to the summing resistor, I just put a pot in there so that I can "dial
in" the contribution from each filter.
On 8-Jul-08, at 6:15 PM, wjhall11 wrote:
> Oh - and we thought we were insane.
>
> As the resident idiots, what're your modifications that allow you to
> control the levels?
>
> We like the staggered-knob approach better.
>
> Bill and Will
>
>
>
> --- In ModularSynthPanels@yahoogroups.com, Scott Juskiw <scott@...>
> wrote:
>>
>> I've posted a better panel layout:
>>
>> http://www.tellun.com/motm/string_filter_panel2.gif
>>
>> I staggered the knobs for the 40 bandpass filters which allows for
>> more room to grab each one, plus I can now put a frequency label
>> above
>> each one.
>>
>
>
>
