Modular Synth Panels

Hi there -

Please note that the 2U JH String Filter panel design on our site
presupposes using a dual gang reverse audio taper 100K pot for the
Stereo Spread control (available from Small Bear).  This makes it
possible for the panel to be labeled "Mono" on the left and "Stereo"
on the right - which we liked best.

We resisted the temptation to build this with 40 separate controls, as
we're already building a behemoth 22 band version of the YU Fixed
Filter <LOL>.  It wasn't lost on us, though that JH thoughtfully
provided for separate outputs for the 40 bands.

In May, we did ask Jurgen about all the 10K trimpots with an eye
toward controlling the depth of the notches individually - like in a
40 band filter.

---------------------
"Hi Jurgen -

"So all those 10K trimpots are how you adjust the - well - 
 depth of the notches?  I mean - like they would be the panel 
 knobs on a regular fixed filter bank?

"Bill and Will"
---------------------

And he responded:

---------------------
"No - adjusting the individual peak frequencies.
 Depth of the notches is globally set for all filters 
 (and voltage controlled, too!) with the Resonance Potentiometer.

"JH."
--------------------

So I guess to control the depth of each notch, you'd have to set up
seperate "Resonance" controls?

Bill and Will





--- In ModularSynthPanels@yahoogroups.com, Scott Juskiw <scott@...> wrote:
>
> 
> 
> On 3-Jul-08, at 2:33 PM, krisp wrote:
> 
> > Ok I going to put my hand up and say I daft enough to try this
> > the 5U sounds good keep it all looking similar on the panel 10U  
> > would be 2 big
> > Have you started on the SM caps 30 per board I finished off my 3  
> > set's 180 sm caps
> > I needed a beer after that I can tell you
> 
> I haven't sourced the parts yet. I'm going to try to tack solder some  
> through-hole caps onto those pads.
> 
> > I think there's a 2U one on Bill and Will's site
> 
> I see it, thanks.
>