The Kawai & Teisco Analog Synths Group

I replaced mine with a similar type only that their height was a bit
higher so now you cannot set for "protect"


--- In kawai_sx210@yahoogroups.com, "Olivier" <oabbeloos@...> wrote:
>
> Hi,
> is there any way to find a 1/4 unit replacement because mine is 
> broken.
> Or can i replace it with another set of jacks ?
> Thanks
> 
> 
> --- In kawai_sx210@yahoogroups.com, "gil_we" <gil_we@> wrote:
> >
> > Thanks,
> > 
> > I think I will just use a panel maounter jacks and wire them to the 
> > output board, hoding it by using two screws connected to the 
> switches.
> > 
> > --- In kawai_sx210@yahoogroups.com, "texhand" <texhand@y...> wrote:
> > >
> > > --- In kawai_sx210@yahoogroups.com, "gil_we" <gil_we@y...> wrote:
> > > >
> > > > I'd like to replace them as they all broke up... these are not 
> > standard 
> > > > 1/4" ... any idea who sell the specific type ?
> > > 
> > > I got some retro parts off e-bay from a seller "chipforbrains" I 
> see
> > > no 1/4 jacks, but the inventroy is increasing with time... so one 
> > day
> > > it may have.
> > > >
> > >
> >
>