Disabling local sounds globally
2010-06-05 by sumguy231
So I guess the best way to ask this is to describe my setup and what I m trying to do: I have a VFX-SD and a PC running FL Studio 9. The MIDI out on the VFX is
Messages
Browse messages
Page 22 of 90 · 4465 messages matched
Re: How difficult is it to install the SQX chip?
2010-06-05 by synthparts
Which model RAM chip does it use?
Re: [Ensoniq-VFX-SD] How difficult is it to install the SQX chip?
2010-06-04 by jammie
the sqx chips are extra chips no need to remove any there is a spare set of ic sockets that have the sqx written underneath them ... From: Rob Rosenbrock To:
Trying to get in touch with Rick C.
2010-06-04 by Christian Brunschen
Hi all, I m trying to get in touch with Rick C, regarding the Transoniq Hacker archive (see http://www.pic101.com/ensoniq/transoniq_hacker.htm). Per that page,
Re: [Ensoniq-VFX-SD] How difficult is it to install the SQX chip?
2010-06-04 by Rob Rosenbrock
I just ordered a set to do this to my SD-1. According to the documenation, (available on the yahoo! site under files/service and repair information,) it s very
Re: [Ensoniq-VFX-SD] How difficult is it to install the SQX chip?
2010-06-04 by jammie
just plug in the ic,s ... From: franzschiller@rocketmail.com To: Ensoniq-VFX-SD@yahoogroups.com Sent: Friday, June 04, 2010 2:39 AM Subject: [Ensoniq-VFX-SD]
Re: [Ensoniq-VFX-SD] How difficult is it to install the SQX chip?
2010-06-04 by Mike Morales
Theres no soldering just pluging in IC Chips ... From: franzschiller@rocketmail.com Subject: [Ensoniq-VFX-SD] How difficult is it to
How difficult is it to install the SQX chip?
2010-06-04 by franzschiller@rocketmail.com
Hi everyone. Long time lurker here. I had a vanilla VFX, and loved programming it so much, that I sold it for a better-condition VFX-SD. To my surprise and
Re: I have erased my Sequencer OS accidentally! Nothing I try works...
2010-05-31 by cappuchino_blue
Oh well, as expected, the disk tools didn t format or write. Formatting gave me track not verified error s for every step until it got to the end when it have
Re: I have erased my Sequencer OS accidentally! Nothing I try works...
2010-05-31 by cappuchino_blue
I have found under the files section of the group a file called VFX Tools.zip. I have downloaded and extracted that so I ll try it from FreeDOS at bootup. I m
Re: I have erased my Sequencer OS accidentally! Nothing I try works...
2010-05-31 by cappuchino_blue
I don t have access to a computer with a floppy drive at home, but at school we have some really ancient machines. I m sure they d work, just I don t really
Re: [Ensoniq-VFX-SD] I have erased my Sequencer OS accidentally! Nothing I try works...
2010-05-30 by Rish
We have the OS discs available at www.Route66studios.com Sent from my iPod ... We have the OS discs available at www.Route66studios.com Sent from my iPod On
Re: [Ensoniq-VFX-SD] I have erased my Sequencer OS accidentally! Nothing I try works...
2010-05-30 by Jess Balint
is it possible (and legal?) for somebody to post a raw disk image which would allow makign a new sequencer disk without the EDE program? ... is it possible
Re: [Ensoniq-VFX-SD] I have erased my Sequencer OS accidentally! Nothing I try works...
2010-05-30 by Rob Rosenbrock
I don t think that EDE works with a USB floppy drive either. Do you have access to a computer with a built-in drive? ... I don t think that EDE works with a
I have erased my Sequencer OS accidentally! Nothing I try works...
2010-05-30 by cappuchino_blue
Hello. I think I have managed to make a new record here. I have bought the VFX SD for £162 a couple of weeks back from eBay. I received it in beautifully
Re: [Ensoniq-VFX-SD] Tuning Drifting
2010-05-26 by jammie
the voltages are from the 5v supply check this supply your 5v regulator might be suffering from ac from the cap filter circuit due to low charging of the caps
Re: [Ensoniq-VFX-SD] Tuning Drifting
2010-05-26 by Jon Carroll
Not really... there could be i guess... You open the synth, remove the keys holding the keybed in place, disconnect the keybed
Re: [Ensoniq-VFX-SD] Tuning Drifting
2010-05-26 by James R. Pardonek
Thanks for the great information. Something I never thought of. Is there a document somewhere explaining how to do this? James Pardonek CISSP Senior Network
Re: [Ensoniq-VFX-SD] Tuning Drifting
2010-05-26 by Jon Carroll
Try cleaning the aftertouch contacts on the keys... ( and the keyboard in general) ... From: James R. Pardonek To:
Re: [Ensoniq-VFX-SD] Tuning Drifting
2010-05-25 by Will Robinson
The Mod wheel is the cause for the Alto Sax plunge on my unit. It does become annoying but that is a drastic use of pitch modulating, I usually do not notice
Tuning Drifting
2010-05-25 by James R. Pardonek
Hi, I still use my VFX-SD in live performances on a weekly basis. I’ve noticed lately that from gig to gig it goes out of tune and have also noticed that
Re: Step Sequencing
2010-05-21 by mm9745
Yeah your going to have to change the eproms http://www.route66studios.com/ VFXSD EPROM Update - Version 2.00............ $26.00
Re: [Ensoniq-VFX-SD] Re: Step Sequencing
2010-05-21 by Claus
Hi! Yes. You can get them at Route66Studios. Best, AudioSaucer Claus ... From: rrsw_ccs To: Ensoniq-VFX-SD
Re: Step Sequencing
2010-05-20 by rrsw_ccs
I ve got 1.37. Where do I get a copy of 2.0 or better? Will that need new ROMs?
Re: [Ensoniq-VFX-SD] Re: Step Sequencing
2010-05-20 by Will Robinson
Software Version 2.0 added Step Entry Recording. Make sure you have OS 2 or higher. One of the features added was Temporary Record Bypass; holding down the REC
Re: Step Sequencing
2010-05-20 by az_spunky
There is step recording on the VFX-SD. Check the manual, page 12-15 Event Edit http://www.soundprogramming.net/manuals/Ensoniq_VFX-SD_Manual.pdf You step
Re: [Ensoniq-VFX-SD] Re: Step Sequencing
2010-05-20 by Rish
Chances are that is not a hardware issue as the seq was updated all the time in the OS and the firmware. What versions do you have? Rish Sent from my iPod
Re: Step Sequencing
2010-05-20 by sumguy231
Bummer, but on the other hand that may help answer my question about hardware versions. When was yours made?
Re: Step Sequencing
2010-05-20 by rrsw_ccs
Don t have that option on my VFX-SD. :(
Re: Step Sequencing
2010-05-20 by sumguy231
Thanks! I believe that answers my question.
Step Sequencing
2010-05-19 by Claus
Hi! To enter STEP recording, press the SEQ-CONTROL button. On page 3 it says STEP-ENTRY-OFF. Set this to on. When You enter recording, the track will be on the
Step Sequencing
2010-05-19 by sumguy231
So hi, I m new around here. I picked up a VFX-SD from Craigslist recently as my first hardware synthesizer and I love it but I have a couple questions: I
Re: [Ensoniq-VFX-SD] Creative Labs re-launching Ensoniq brand?
2010-05-18 by Edward Goforth
I do not know, but it would really be great if Ensoniq was back and had some support! They made very good products! Ed ... From: Christian Brunschen
Re: [Ensoniq-VFX-SD] KPC eprom v2.33
2010-05-18 by Rish
I have all the KPC versions that were avialable. www.route66studios.com Rich Sent from my iPod
KPC eprom v2.33
2010-05-17 by the_intent
Hello, I own an Ensoniq Keyboard and damaged the KPC Eprom (the one on the board below the keyboard). I need a binary dump of this file. The version of this
Re: Can the sequencer drive off board MIDI devices?
2010-05-17 by rrsw_ccs
Cool, Thanks! It works! I m having a really tough time understanding how this thing makes sounds. Editing is so hit and miss to me and not much of it makes
Creative Labs re-launching Ensoniq brand?
2010-05-17 by Christian Brunschen
Hi all, According to Wikipedia at , In January 1998, ENSONIQ Corp. was acquired by Creative Technology Ltd. for $77
Re: [Ensoniq-VFX-SD] Can the sequencer drive off board MIDI devices?
2010-05-16 by Rish
I have done this and uses all 16 channels and it wors great. Rush Sent from my iPod
Re: Can the sequencer drive off board MIDI devices?
2010-05-16 by az_spunky
Everything Claus said, and also under the Master button, the MIDI Mode needs to be set to Multi.
Can the sequencer drive off board MIDI devices?
2010-05-16 by Claus
Hi! In the Manual, It is explained in chapter 5 (page 27+28) how to set up the sending MIDI-channel of a given track. You have to select a track. Then press
Re: [Ensoniq-VFX-SD] keyboard fix
2010-05-15 by E. Tejkowski
... I applied this fix to mine and it works fine now (no more kbd calibration errors, shutdowns, etc…). I d echo what the others have said here… use a
Can the sequencer drive off board MIDI devices?
2010-05-15 by rrsw_ccs
I was wondering if the VFX-SD sequencer could have a track or tracks assigned to midi channels to drive other midi gear? Haven t been able to figure it out in
Re: disquette compatibility with another synth or sequencer?
2010-05-09 by mm9745
Well if it is the power board or the tranformer someone has them for sale on ebay 25 each right now.
disquette compatibility with another synth or sequencer?
2010-05-09 by chabot652002
Hello, I am new to this forum. I have always been a fan of the VFX-SD since i bought one new in 1990! I am also the happy owner of a Fizmo which i really enjoy
Re: [Ensoniq-VFX-SD] Re: VFX Rack version
2010-05-08 by jammie
problem thre is it has no transwave modulation so its impossible to do those wavetable type sounds the only machines that can are the ts10/12 but the 12 only
Re: VFX Rack version
2010-05-08 by todamoonmusic
I ve thought about this myself and the ultimate way I came up was to sample the basic patch with no effects and build it back up from scratch in my Yamaha
VFX Rack....
2010-05-07 by The H-Man
If memory serves, if you select the soft button under Ignore when the calibration error comes up, the keyboard will boot normally, just without the use of
Re: [Ensoniq-VFX-SD] Re: VFX Rack version
2010-05-07 by jammie
no chance where are you going to get the eeprom image from no a kpc emulator board is the way to go as this is what powers the racks any way syntaur have some
Re: [Ensoniq-VFX-SD] VFX Rack version
2010-05-07 by jammie
eps16+ is the nearest rack version same engine same effects but no rom easy fix with a all sound rom sampled thats what i did with mine and to recreat the
Re: [Ensoniq-VFX-SD] Ensoniq VFX board connector
2010-05-07 by jammie
hard wiring should be done from under neath not on top were the keys are the scanner rom can also become currupted due to bad connections causing shortings