R2m box
2015-12-13 by Neil Kagan
Hi people, Does anyone know where I can buy just the box controller? I've got the ribbon and module already but want to use the ribbon with another rig. Neil Sent from my iPhone
Thread
R2m box
AW: [Doepfer_a100] R2m box
2015-12-14 by yahoo@doepfer.de
> Hi people, > > Does anyone know where I can buy just the box controller? I've got the ribbon and module already but want to use the > ribbon with another rig. > > Neil As we offer both parts also separately you should be able to order it from each of our dealers (I'd try SchneidersLaden in Berlin). Maybe they will have to order it separately for you if the do not want to cut the complete set. Best wishes Dieter Doepfer
Re: AW: [Doepfer_a100] R2m box
2015-12-14 by Neil Kagan
Oh thanks Dieter I'll try emailing as it wasn't listed on the website. Regards, Neil Sent from my iPhone
Show quoted textHide quoted text
> On 14 Dec 2015, at 10:22, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: > > > Hi people, > > > > Does anyone know where I can buy just the box controller? I've got the ribbon and module already but want to use the > > ribbon with another rig. > > > > Neil > > As we offer both parts also separately you should be able to order it from each of our dealers (I'd try SchneidersLaden in Berlin). > Maybe they will have to order it separately for you if the do not want to cut the complete set. > > Best wishes > Dieter Doepfer > >
Re: AW: [Doepfer_a100] R2m box
2015-12-14 by achtung_999
Hey Neil,
Isn't it smart to try Emis first? You were in the UK I remember...
All the best,
Ernst
Show quoted textHide quoted text
On Mon, Dec 14, 2015 at 12:50 PM, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
Oh thanks Dieter I'll try emailing as it wasn't listed on the website.Regards,Neil
Sent from my iPhone> Hi people,
>
> Does anyone know where I can buy just the box controller? I've got the ribbon and module already but want to use the
> ribbon with another rig.
>
> Neil
As we offer both parts also separately you should be able to order it from each of our dealers (I'd try SchneidersLaden in Berlin).
Maybe they will have to order it separately for you if the do not want to cut the complete set.
Best wishes
Dieter Doepfer
Re: AW: [Doepfer_a100] R2m box
2015-12-14 by David Kellett
Just to check - it is another ribbon controller not the module that you need? I think I do too. I bought my ribbon controller and module secondhand and the ribbon controller is so hard that to get a pressure signal you have to virtually stand in the thing - well a handstand on one finger anyhow :-) And in that position I found it impossible to do vibrato. But I need to know - if I buy another ribbon, are all the modules the same? ie compatible with a new ribbon controller? I think I read that later ribbons had a softer touch anyhow. David www.movingisliving.co.uk Sent from my iPhone
Show quoted textHide quoted text
> On 14 Dec 2015, at 13:55, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: > > Hey Neil, > > Isn't it smart to try Emis first? You were in the UK I remember... > > All the best, > > Ernst > > > > >> On Mon, Dec 14, 2015 at 12:50 PM, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >> >> Oh thanks Dieter I'll try emailing as it wasn't listed on the website. >> >> Regards, >> >> Neil >> >> Sent from my iPhone >> >>> On 14 Dec 2015, at 10:22, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >>> >>> >>> > Hi people, >>> > >>> > Does anyone know where I can buy just the box controller? I've got the ribbon and module already but want to use the >>> > ribbon with another rig. >>> > >>> > Neil >>> >>> As we offer both parts also separately you should be able to order it from each of our dealers (I'd try SchneidersLaden in Berlin). >>> Maybe they will have to order it separately for you if the do not want to cut the complete set. >>> >>> Best wishes >>> Dieter Doepfer >>> > >
Re: AW: [Doepfer_a100] R2m box
2015-12-14 by Neil Kagan
Yeah I'll call Andy later! Sent from my iPhone
Show quoted textHide quoted text
> On 14 Dec 2015, at 13:55, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: > > Hey Neil, > > Isn't it smart to try Emis first? You were in the UK I remember... > > All the best, > > Ernst > > > > >> On Mon, Dec 14, 2015 at 12:50 PM, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >> >> Oh thanks Dieter I'll try emailing as it wasn't listed on the website. >> >> Regards, >> >> Neil >> >> Sent from my iPhone >> >>> On 14 Dec 2015, at 10:22, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >>> >>> >>> > Hi people, >>> > >>> > Does anyone know where I can buy just the box controller? I've got the ribbon and module already but want to use the >>> > ribbon with another rig. >>> > >>> > Neil >>> >>> As we offer both parts also separately you should be able to order it from each of our dealers (I'd try SchneidersLaden in Berlin). >>> Maybe they will have to order it separately for you if the do not want to cut the complete set. >>> >>> Best wishes >>> Dieter Doepfer >>> > >
Re: AW: [Doepfer_a100] R2m box
2015-12-14 by Neil Kagan
Neither, it's the control box which is standalone. Neil Sent from my iPhone
Show quoted textHide quoted text
> On 14 Dec 2015, at 15:40, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: > > Just to check - it is another ribbon controller not the module that you need? I think I do too. I bought my ribbon controller and module secondhand and the ribbon controller is so hard that to get a pressure signal you have to virtually stand in the thing - well a handstand on one finger anyhow :-) And in that position I found it impossible to do vibrato. But I need to know - if I buy another ribbon, are all the modules the same? ie compatible with a new ribbon controller? I think I read that later ribbons had a softer touch anyhow. > > David > > www.movingisliving.co.uk > > Sent from my iPhone > >> On 14 Dec 2015, at 13:55, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >> >> >> Hey Neil, >> >> Isn't it smart to try Emis first? You were in the UK I remember... >> >> All the best, >> >> Ernst >> >> >> >> >>> On Mon, Dec 14, 2015 at 12:50 PM, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >>> >>> Oh thanks Dieter I'll try emailing as it wasn't listed on the website. >>> >>> Regards, >>> >>> Neil >>> >>> Sent from my iPhone >>> >>>> On 14 Dec 2015, at 10:22, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >>>> >>>> >>>> > Hi people, >>>> > >>>> > Does anyone know where I can buy just the box controller? I've got the ribbon and module already but want to use the >>>> > ribbon with another rig. >>>> > >>>> > Neil >>>> >>>> As we offer both parts also separately you should be able to order it from each of our dealers (I'd try SchneidersLaden in Berlin). >>>> Maybe they will have to order it separately for you if the do not want to cut the complete set. >>>> >>>> Best wishes >>>> Dieter Doepfer >>>> > >
Re: AW: [Doepfer_a100] R2m box
2015-12-14 by David Kellett
Ahh I see!! And I need a ribbon not a box. Anyone know is the ribbon itself available separately? David www.movingisliving.co.uk Sent from my iPhone
Show quoted textHide quoted text
> On 14 Dec 2015, at 15:45, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: > > Neither, it's the control box which is standalone. > > Neil > > Sent from my iPhone > >> On 14 Dec 2015, at 15:40, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >> >> >> Just to check - it is another ribbon controller not the module that you need? I think I do too. I bought my ribbon controller and module secondhand and the ribbon controller is so hard that to get a pressure signal you have to virtually stand in the thing - well a handstand on one finger anyhow :-) And in that position I found it impossible to do vibrato. But I need to know - if I buy another ribbon, are all the modules the same? ie compatible with a new ribbon controller? I think I read that later ribbons had a softer touch anyhow. >> >> David >> >> www.movingisliving.co.uk >> >> Sent from my iPhone >> >>> On 14 Dec 2015, at 13:55, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >>> >>> >>> Hey Neil, >>> >>> Isn't it smart to try Emis first? You were in the UK I remember... >>> >>> All the best, >>> >>> Ernst >>> >>> >>> >>> >>>> On Mon, Dec 14, 2015 at 12:50 PM, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >>>> >>>> Oh thanks Dieter I'll try emailing as it wasn't listed on the website. >>>> >>>> Regards, >>>> >>>> Neil >>>> >>>> Sent from my iPhone >>>> >>>>> On 14 Dec 2015, at 10:22, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >>>>> >>>>> >>>>> > Hi people, >>>>> > >>>>> > Does anyone know where I can buy just the box controller? I've got the ribbon and module already but want to use the >>>>> > ribbon with another rig. >>>>> > >>>>> > Neil >>>>> >>>>> As we offer both parts also separately you should be able to order it from each of our dealers (I'd try SchneidersLaden in Berlin). >>>>> Maybe they will have to order it separately for you if the do not want to cut the complete set. >>>>> >>>>> Best wishes >>>>> Dieter Doepfer >>>>> > >
Re: AW: [Doepfer_a100] R2m box
2015-12-14 by Neil Kagan
Yup: http://www.schneidersladen.de/en/doepfer-a-198-ribbon-controller-nur-only-manual.html Sent from my iPhone
Show quoted textHide quoted text
> On 14 Dec 2015, at 16:06, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: > > Ahh I see!! And I need a ribbon not a box. > > Anyone know is the ribbon itself available separately? > > David > > www.movingisliving.co.uk > > Sent from my iPhone > >> On 14 Dec 2015, at 15:45, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >> >> >> Neither, it's the control box which is standalone. >> >> Neil >> >> Sent from my iPhone >> >>> On 14 Dec 2015, at 15:40, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >>> >>> >>> Just to check - it is another ribbon controller not the module that you need? I think I do too. I bought my ribbon controller and module secondhand and the ribbon controller is so hard that to get a pressure signal you have to virtually stand in the thing - well a handstand on one finger anyhow :-) And in that position I found it impossible to do vibrato. But I need to know - if I buy another ribbon, are all the modules the same? ie compatible with a new ribbon controller? I think I read that later ribbons had a softer touch anyhow. >>> >>> David >>> >>> www.movingisliving.co.uk >>> >>> Sent from my iPhone >>> >>>> On 14 Dec 2015, at 13:55, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >>>> >>>> >>>> Hey Neil, >>>> >>>> Isn't it smart to try Emis first? You were in the UK I remember... >>>> >>>> All the best, >>>> >>>> Ernst >>>> >>>> >>>> >>>> >>>>> On Mon, Dec 14, 2015 at 12:50 PM, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >>>>> >>>>> Oh thanks Dieter I'll try emailing as it wasn't listed on the website. >>>>> >>>>> Regards, >>>>> >>>>> Neil >>>>> >>>>> Sent from my iPhone >>>>> >>>>>> On 14 Dec 2015, at 10:22, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >>>>>> >>>>>> >>>>>> > Hi people, >>>>>> > >>>>>> > Does anyone know where I can buy just the box controller? I've got the ribbon and module already but want to use the >>>>>> > ribbon with another rig. >>>>>> > >>>>>> > Neil >>>>>> >>>>>> As we offer both parts also separately you should be able to order it from each of our dealers (I'd try SchneidersLaden in Berlin). >>>>>> Maybe they will have to order it separately for you if the do not want to cut the complete set. >>>>>> >>>>>> Best wishes >>>>>> Dieter Doepfer >>>>>> > >
AW: AW: [Doepfer_a100] R2m box
2015-12-14 by yahoo@doepfer.de
> Ahh I see!! And I need a ribbon not a box. > > > Anyone know is the ribbon itself available separately? > > > David As already mentioned in my last message: "As we offer both parts also separately you should be able to order it from each of our dealers (I'd try SchneidersLaden in Berlin). Maybe they will have to order it separately for you if the do not want to cut the complete set." Best wishes Dieter Doepfer
AW: AW: [Doepfer_a100] R2m box
2015-12-14 by yahoo@doepfer.de
> Just to check - it is another ribbon controller not the module that you need? I think I do too. I bought my ribbon > controller and module secondhand and the ribbon controller is so hard that to get a pressure signal you have to virtually > stand in the thing - well a handstand on one finger anyhow :-) And in that position I found it impossible to do vibrato. > But I need to know - if I buy another ribbon, are all the modules the same? ie compatible with a new ribbon controller? > I think I read that later ribbons had a softer touch anyhow. > > > David That's obviously the old version of the manual manufactured before about 2005. For details please refer to the FAQ page of our website: www.doepfer.com > FAQ > R2M Best wishes Dieter Doepfer
Re: AW: AW: [Doepfer_a100] R2m box
2015-12-14 by Neil Kagan
The current one on the market is great to play, highly responsive and very sturdy. Neil Sent from my iPhone
Show quoted textHide quoted text
On 14 Dec 2015, at 17:16, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >> Just to check - it is another ribbon controller not the module that you need? I think I do too. I bought my ribbon >> controller and module secondhand and the ribbon controller is so hard that to get a pressure signal you have to virtually >> stand in the thing - well a handstand on one finger anyhow :-) And in that position I found it impossible to do vibrato. >> But I need to know - if I buy another ribbon, are all the modules the same? ie compatible with a new ribbon controller? >> I think I read that later ribbons had a softer touch anyhow. >> >> >> David > > That's obviously the old version of the manual manufactured before about 2005. For details please refer to the FAQ page of our > website: > > www.doepfer.com > FAQ > R2M > > Best wishes > Dieter Doepfer > > > > > ------------------------------------ > > ------------------------------------ > > > ------------------------------------ > > Yahoo Groups Links > > >
RE: AW: AW: [Doepfer_a100] R2m box
2015-12-14 by Scott Rogers
The question is: Are they available? I ordered one in early October and I'm still waiting. Scott From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Sent: Monday, December 14, 2015 12:23 PM To: Doepfer_a100@yahoogroups.com Subject: Re: AW: AW: [Doepfer_a100] R2m box The current one on the market is great to play, highly responsive and very sturdy. Neil Sent from my iPhone On 14 Dec 2015, at 17:16, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >> Just to check - it is another ribbon controller not the module that you need? I think I do too. I bought my ribbon >> controller and module secondhand and the ribbon controller is so hard that to get a pressure signal you have to virtually >> stand in the thing - well a handstand on one finger anyhow :-) And in that position I found it impossible to do vibrato. >> But I need to know - if I buy another ribbon, are all the modules the same? ie compatible with a new ribbon controller? >> I think I read that later ribbons had a softer touch anyhow. >> >> >> David > > That's obviously the old version of the manual manufactured before about 2005. For details please refer to the FAQ page of our
Show quoted textHide quoted text
> website: > > www.doepfer.com > FAQ > R2M > > Best wishes > Dieter Doepfer > > > > > ------------------------------------ > > ------------------------------------ > > > ------------------------------------ > > Yahoo Groups Links > > >
AW: AW: AW: [Doepfer_a100] R2m box
2015-12-14 by yahoo@doepfer.de
> The question is: Are they available? > > I ordered one in early October and I’m still waiting. > > Scott Where did you order ? Dieter Doepfer
RE: AW: AW: [Doepfer_a100] R2m box
2015-12-14 by Scott Rogers
We have a store here in Toronto (and head office in Montreal) called Moog Audio. I have ordered many things from them lately (they sell a lot of modular gear and synthesizers) and recently added the Doepfer modules so I decided to try ordering from them instead of Martin this time. But I have a feeling they just in turn place the order with Martin so there probably isn't any difference. Either way, it seems to be taking a long time. Scott
Show quoted textHide quoted text
-----Original Message----- From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Sent: Monday, December 14, 2015 12:42 PM To: Doepfer_a100@yahoogroups.com Subject: AW: AW: AW: [Doepfer_a100] R2m box > The question is: Are they available? > > I ordered one in early October and I'm still waiting. > > Scott Where did you order ? Dieter Doepfer ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links
Re: AW: AW: [Doepfer_a100] R2m box
2015-12-14 by David Kellett
I couldn't seem to find that link Dieter. Would a new ribbon controller be comparable with an old Ribbon Controller Module? David www.movingisliving.co.uk Sent from my iPhone
Show quoted textHide quoted text
On 14 Dec 2015, at 17:16, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >> Just to check - it is another ribbon controller not the module that you need? I think I do too. I bought my ribbon >> controller and module secondhand and the ribbon controller is so hard that to get a pressure signal you have to virtually >> stand in the thing - well a handstand on one finger anyhow :-) And in that position I found it impossible to do vibrato. >> But I need to know - if I buy another ribbon, are all the modules the same? ie compatible with a new ribbon controller? >> I think I read that later ribbons had a softer touch anyhow. >> >> >> David > > That's obviously the old version of the manual manufactured before about 2005. For details please refer to the FAQ page of our > website: > > www.doepfer.com > FAQ > R2M > > Best wishes > Dieter Doepfer > > > > > ------------------------------------ > > ------------------------------------ > > > ------------------------------------ > > Yahoo Groups Links > > >
Re: AW: AW: [Doepfer_a100] R2m box
2015-12-14 by David Kellett
That should have read "compatible" David www.movingisliving.co.uk Sent from my iPhone
Show quoted textHide quoted text
> On 14 Dec 2015, at 17:55, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: > > I couldn't seem to find that link Dieter. Would a new ribbon controller be comparable with an old Ribbon Controller Module? > > David > > www.movingisliving.co.uk > > Sent from my iPhone > > On 14 Dec 2015, at 17:16, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: > > >> Just to check - it is another ribbon controller not the module that you need? I think I do too. I bought my ribbon > >> controller and module secondhand and the ribbon controller is so hard that to get a pressure signal you have to virtually > >> stand in the thing - well a handstand on one finger anyhow :-) And in that position I found it impossible to do vibrato. > >> But I need to know - if I buy another ribbon, are all the modules the same? ie compatible with a new ribbon controller? > >> I think I read that later ribbons had a softer touch anyhow. > >> > >> > >> David > > > > That's obviously the old version of the manual manufactured before about 2005. For details please refer to the FAQ page of our > > website: > > > > www.doepfer.com > FAQ > R2M > > > > Best wishes > > Dieter Doepfer > > > > > > > > > > ------------------------------------ > > > > ------------------------------------ > > > > > > ------------------------------------ > > > > Yahoo Groups Links > > > > > > >
AW: AW: AW: [Doepfer_a100] R2m box
2015-12-14 by yahoo@doepfer.de
> I couldn't seem to find that link Dieter. Would a new ribbon controller be comparable with an old Ribbon Controller Module? > > David Yes, the manuals are compatible. The old version used a pressure sensor (conductive rubber) that was not as sensitive as the new one. That's the only difference. That's the link: http://www.doepfer.de/faq/R2M_faq.htm Best wishes Dieter Doepfer
AW: AW: AW: [Doepfer_a100] R2m box
2015-12-14 by yahoo@doepfer.de
> We have a store here in Toronto (and head office in Montreal) called Moog > Audio. I have ordered many things from them lately (they sell a lot of > modular gear and synthesizers) and recently added the Doepfer modules so I > decided to try ordering from them instead of Martin this time. > > But I have a feeling they just in turn place the order with Martin so there > probably isn't any difference. > > Either way, it seems to be taking a long time. > > Scott From my knowledge Martin of Technopolis orders every 2-3 weeks. So it should be no problem to obtain a single R2M/A-198 manual or single R2M box from him. Best wishes Dieter Doepfer
Re: AW: AW: AW: [Doepfer_a100] R2m box
2015-12-14 by David Kellett
Thanks again Dieter. Mine is an old one. I shall buy a replacement in the new year. David www.movingisliving.co.uk Sent from my iPhone
Show quoted textHide quoted text
> On 14 Dec 2015, at 18:10, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: > > > I couldn't seem to find that link Dieter. Would a new ribbon controller be comparable with an old Ribbon Controller Module? > > > > David > > Yes, the manuals are compatible. The old version used a pressure sensor (conductive rubber) that was not as sensitive as the new > one. That's the only difference. That's the link: http://www.doepfer.de/faq/R2M_faq.htm > > Best wishes > Dieter Doepfer > >
RE: AW: AW: [Doepfer_a100] R2m box
2015-12-15 by Scott Rogers
I asked Moog Audio. This is their reply: Apologies for the wait, we just received this item back in stock yesterday at our Toronto location and are expecting to have your order shipped out tomorrow afternoon. Hmmm. What an amazing coincidence! They very day I asked, it was suddenly in stock! Well, I'll believe it when I see it. Thanks Scott
Show quoted textHide quoted text
From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Sent: Monday, December 14, 2015 1:11 PM To: Doepfer_a100@yahoogroups.com Subject: AW: AW: AW: [Doepfer_a100] R2m box > We have a store here in Toronto (and head office in Montreal) called Moog > Audio. I have ordered many things from them lately (they sell a lot of > modular gear and synthesizers) and recently added the Doepfer modules so I > decided to try ordering from them instead of Martin this time. > > But I have a feeling they just in turn place the order with Martin so there > probably isn't any difference. > > Either way, it seems to be taking a long time. > > Scott From my knowledge Martin of Technopolis orders every 2-3 weeks. So it should be no problem to obtain a single R2M/A-198 manual or single R2M box from him. Best wishes Dieter Doepfer