Doepfer

Neither, it's the control box which is standalone.

Neil

Sent from my iPhone

> On 14 Dec 2015, at 15:40, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> Just to check - it is another ribbon controller not the module that you need? I think I do too. I bought my ribbon controller and module secondhand and the ribbon controller is so hard that to get a pressure signal you have to virtually stand in the thing - well a handstand on one finger anyhow :-) And in that position I found it impossible to do vibrato. But I need to know - if I buy another ribbon, are all the modules the same?  ie compatible with a new ribbon controller? I think I read that later ribbons had a softer touch anyhow. 
> 
> David
> 
> www.movingisliving.co.uk
> 
> Sent from my iPhone 
> 
>> On 14 Dec 2015, at 13:55, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
>> 
>>  
>> Hey Neil,
>> 
>> Isn't it smart to try Emis first? You were in the UK I remember...
>> 
>> All the best,
>> 
>> Ernst
>> 
>> 
>> 
>> 
>>> On Mon, Dec 14, 2015 at 12:50 PM, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
>>>  
>>> Oh thanks Dieter I'll try emailing as it wasn't listed on the website.
>>> 
>>> Regards,
>>> 
>>> Neil
>>> 
>>> Sent from my iPhone
>>> 
>>>> On 14 Dec 2015, at 10:22, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
>>>> 
>>>>  
>>>> > Hi people,
>>>> >
>>>> > Does anyone know where I can buy just the box controller? I've got the ribbon and module already but want to use the
>>>> > ribbon with another rig.
>>>> >
>>>> > Neil
>>>> 
>>>> As we offer both parts also separately you should be able to order it from each of our dealers (I'd try SchneidersLaden in Berlin).
>>>> Maybe they will have to order it separately for you if the do not want to cut the complete set.
>>>> 
>>>> Best wishes
>>>> Dieter Doepfer
>>>> 
> 
>