Doepfer

That should have read "compatible"

David

www.movingisliving.co.uk

Sent from my iPhone 

> On 14 Dec 2015, at 17:55, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> I couldn't seem to find that link Dieter. Would a new ribbon controller be comparable with an old Ribbon Controller Module?
> 
> David
> 
> www.movingisliving.co.uk
> 
> Sent from my iPhone 
> 
> On 14 Dec 2015, at 17:16, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> >> Just to check - it is another ribbon controller not the module that you need? I think I do too. I bought my ribbon
> >> controller and module secondhand and the ribbon controller is so hard that to get a pressure signal you have to virtually
> >> stand in the thing - well a handstand on one finger anyhow :-) And in that position I found it impossible to do vibrato.
> >> But I need to know - if I buy another ribbon, are all the modules the same? ie compatible with a new ribbon controller?
> >> I think I read that later ribbons had a softer touch anyhow.
> >> 
> >> 
> >> David
> > 
> > That's obviously the old version of the manual manufactured before about 2005. For details please refer to the FAQ page of our
> > website:
> > 
> > www.doepfer.com > FAQ > R2M
> > 
> > Best wishes
> > Dieter Doepfer
> > 
> > 
> > 
> > 
> > ------------------------------------
> > 
> > ------------------------------------
> > 
> > 
> > ------------------------------------
> > 
> > Yahoo Groups Links
> > 
> > 
> > 
>