Doepfer

or input a dynamic signal to the 136 (like a complete drum loop...)



Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist

[Doepfer_a100] group owner

www. parallel - worlds - music. com

www. myspace. com/ parallelworldsmusic

www. myspace. com/ interconnectedmusic

www. myspace. com/ memorygeist

www. DiN. org. uk

www. musicamaximamagnetica. com

www. vu-us. com

--- On Fri, 11/12/10, Ian Campbell <icampbell@serck-controls.co.uk> wrote:

From: Ian Campbell <icampbell@serck-controls.co.uk>
Subject: RE: FW: [Doepfer_a100] a New month of modular patching ideas...
To: "Doepfer_a100@yahoogroups.com" <Doepfer_a100@yahoogroups.com>
Date: Friday, November 12, 2010, 10:32 AM







 



  


    
      
      
      thanks for the pointers, ingo.



my first couple of plays on the a136 were a bit disappointing. sounds like i need to control the signal a bit more before it goes into this module to get the best results.



regards,

ian-c.



________________________________

From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] On Behalf Of selfoscillate

Sent: 11 November 2010 12:26

To: Doepfer_a100@yahoogroups.com

Subject: Re: FW: [Doepfer_a100] a New month of modular patching ideas...



> regarding the a136, a116, use them before the filter module, after the osc's (pretty obvious i know).



i recommend to use a filter or a vca/mixer/attenuator

in front of the a136 (especially when the filter lowers

the amplitude of the signal). the a136 is very sensitive and

has no attenuator at the signal input. if your input signal

is too hot (like an unattenuated mix of vco waves) you

will probably just get square waves out of the a136.

not that this would sound bad, but it will not show the

real capabilities of the a136. modulating the signal amplitude

before the a136 can be more interesting than modulating the

settings of the a136 itself. two filters are even better,

one before and one after the a136.

by the way, the cv inputs of the a136 also don't have

attenuators (the corresponding knobs are disabled when

a plug in inserted into the cv inputs), so an external

attenuator is the best friend of the a136.



best wishes



ingo



Click here<https://www.mailcontrol.com/sr/wQw0zmjPoHdJTZGyOCrrhg==> to report this email as spam.



**********************************************************************

Serck Controls Ltd, Rowley Drive, Coventry, CV3 4FH, UK

A company registered in England Reg. No. 4353634

Tel: +44 (0) 24 7630 5050   Fax: +44 (0) 24 7630 2437

Web: www.serck-controls.com  Admin: post@serck-controls.co.uk

A subsidiary of Schneider Electric. 

**********************************************************************

This email and files transmitted with it are confidential and 

intended solely for the use of the individual or entity to whom they 

are addressed. If you have received this email in error please notify 

the above. Any views or opinions presented are those of the author 

and do not necessarily represent those of Serck Controls Ltd. 



This message has been scanned for malware by Mailcontrol. www.Mailcontrol.com



[Non-text portions of this message have been removed]





    
     

    
    


 



  






      

[Non-text portions of this message have been removed]