Re: [Digital BW] Want Film?
2014-07-06 by Kip Babington
The shipping’ll kill you. ... The shipping’ll kill you. On Jul 6, 2014, at 16:37, Tom Maugham Thomas@Maugham.org [DigitalBlackandWhiteThePrint]
Messages
Browse messages
Page 44 of 2186 · 109257 messages matched
RE: [Digital BW] Want Film?
2014-07-06 by Tom Maugham
But can it be converted to make digital sensors????? From: DigitalBlackandWhiteThePrint@yahoogroups.com [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com]
Want Film?
2014-07-06 by roark.paul@...
OK retro film addicts, here s your chance: www.ebay.com/itm/Used-60- Acetate-Film-Roll-Roller- Coating-Coater-Line-/ 131098319489?pt=LH_ DefaultDomain_0&hash=
Re: [Digital BW] Epson 1400 leaky printhead
2014-07-06 by Paul Roark
See https://groups.yahoo.com/neo/groups/QuadtoneRIP/conversations/messages/10949 In there forum there is also a discussion about carts for the 1500. Paul
Re: [Digital BW] Re: mottled yellow position in QTR calibration test print
2014-07-06 by Paul Roark
... Yes, that is my view. On some papers it starts very early. Note that with Arches, I use an ink limit of 25 for the dilute inks and 75 for the K. On some
Re: mottled yellow position in QTR calibration test print
2014-07-06 by paulmwhiting@...
Thanks very much, Paul... are we saying then that this mottling above the ink limit doesn t matter? That make sense... but why didn t I get this after my first
Re: mottled yellow position in QTR calibration test print
2014-07-06 by roark.paul@...
The QTR Calibration Mode print shows the inks and results way past the ink limits. Mottling above the ink limit is rather normal. It s not just the darkest
RE: [Digital BW] Epson 1400 front cover stuck
2014-07-06 by Tom Maugham
Just a suggestion but I would check to see if anything has fallen in there to cause a jam of some nature. HTH and good luck! Tom From:
Epson 1400 front cover stuck
2014-07-06 by mikeg@...
I ve been getting rapidly flashing red lights that supposedly indicate the CD/DVD tray guide is open. I ve never used the CD/DVD tray guide. When I tried to
Re: [Digital BW] Epson 1400 leaky printhead
2014-07-03 by Bharat Patel
Hi, Does anyone know if QTR will recognise Epson 1500W as Artisan 1430? 1500W is UK version of Artisan 1430 in US. If it works then it may make life
Epson 2400 Horizontal Banding
2014-07-02 by parkersmithphoto@...
My Epson 2400 running Eboni inks has started banding along the horizontal axis. All nozzles are clear. I ve tried several different paper settings in the Epson
Re: Setting up an Epson 10000CF for eb6 printing?
2014-07-02 by deanwork2003@...
I used the 10k for Cones K6 neutral inks for several years. It was the least clogging and easiest to use Epson printer I ever set up for monochrome work. I
Re: Fade testing data for MIS UT-14 inks?
2014-06-30 by homershannon@...
Mark: I would say that UT-14 prints a neutral tone. I have experimented with changing the tone using curves and created neutral and warm tone curves for
mottled yellow position in QTR calibration test print
2014-06-29 by paulmwhiting@...
I m using a 1400, the Eb6 inkset, and Premier Art Smooth 205 paper, and am going to try making a curve. I know Paul already has one in the QTR zip file, but I
Re: Fade testing data for MIS UT-14 inks?
2014-06-29 by mccarvill@...
Thanks for the replies, folks. @ Paul: I count only 7 / 23 Aardenburg test results for Cone that show a PASS, so I m not sure what to make of this as a
Re: Fade testing data for MIS UT-14 inks?
2014-06-28 by homershannon@...
I ve been using the UT-14 ink set for several years. I have no scientific data on how it fades, but I have prints that have hung for at least three years and I
Re: [Digital BW] Fade testing data for MIS UT-14 inks?
2014-06-28 by Paul Roark
The carbon (warm)channel is extremely light fast. The cool channel has color pigments in it, as well as carbon. The color pigs are not as solid as Epson or HP
Fade testing data for MIS UT-14 inks?
2014-06-27 by mccarvill@...
Can anyone point me to any current, third-party fade test results for MIS UT-14 inks (or equivalent)? I found nothing on the Wilhelm Imaging site, but then
Re: Epson Stylus Color 3000 Wide Format Printer : Free
2014-06-27 by a_pettit_jr@...
Printer SOLD Thanks
Re: [Digital BW] Epson 1400 leaky printhead
2014-06-25 by Bharat Patel
Thank you Paul. I am convinced it is the printer head so this one will have to go. It is rather difficult to get 1400s in UK in any decent condition. So I may
Re: [Digital BW] Epson 1400 leaky printhead
2014-06-23 by Paul Roark
That s not normal. Be sure you have not removed the reservoir plug. There are 2 holes in the top of the carts. One if for air to come in, the other for
RE: [Digital BW] Epson 1400 leaky printhead
2014-06-23 by Elliot Puritz
Gosh, what bum news. Can you file a claim with Ebay? Such problems with items bought on Ebay are becoming increasingly common. The company has responded
Epson 1400 leaky printhead
2014-06-23 by yoursnaps@...
Hi, I recently bought a used Epson 1400 on ebay for some B&W printing using EB6 inks. Unfortunately the inks simply leak out through the print head. Anybody
FAIR WITNESS Kickstarter nearing the end
2014-06-22 by ausdlk@...
My Kickstarter campaign to fund the publication of FAIR WITNESS: Street Photography for the 21st Century is about to enter its final week. My work and book
Re: [Digital BW] Re: Setting up an Epson 10000CF for eb6 printing?
2014-06-21 by e.dinkla@...
Mark, Disassembled another 4900 cart. There is just one connector to let the ink out. No pressure chamber, no extra air bag around the ink pouch. The ink bag
Re: [Digital BW] Re: Setting up an Epson 10000CF for eb6 printing?
2014-06-21 by mrjimbo2
Hey you guys.. I don t have a 4900 so I guess I should stay out of it.. Do have a 4800 and it for sure is not pressurized nor is the 4880.. or what ever they
Re: [Digital BW] Re: Setting up an Epson 10000CF for eb6 printing?
2014-06-20 by mrjimbo2
Jeeze, thanks Mark.. I have to say I was totally of the impression that they weren t pressurized.. as are the previous versions.. Actually I ve read that
Re: [Digital BW] Re: Setting up an Epson 10000CF for eb6 printing?
2014-06-20 by Mark Savoia
The carts I am using have no bags in them either, but you can see in the ink bay where the pressure goes into the hole below the ink out hole, right at the
Re: [Digital BW] Re: Setting up an Epson 10000CF for eb6 printing?
2014-06-20 by Paul Roark
Ernst, I think all I was able to get and find was in that folder. Even though the YouTube is verrrry slloooow, the info is there. Paul www.PaulRoark.com
Re: [Digital BW] Re: Setting up an Epson 10000CF for eb6 printing?
2014-06-20 by Paul Roark
... I used the smallest jeweler s screwdriver I have to poke the cap of the inside of the valve. It seemed to do the job. I would think trying to feel for
Re: [Digital BW] Re: Setting up an Epson 10000CF for eb6 printing?
2014-06-20 by e.dinkla@...
If the field guide is correct and not half a copy of another printer then the ink pressure could be an internal one in the printer itself.
Re: [Digital BW] Re: Setting up an Epson 10000CF for eb6 printing?
2014-06-20 by e.dinkla@...
Mark, I received three near empty OEM 4900 carts, Photo Black, T6531, 200 ml etc. Took one apart. There is no pressurised chamber with an ink bag inside, no
Re: Setting up an Epson 10000CF for eb6 printing?
2014-06-20 by geo@...
Thanks for those files, that makes it seem manageable! Can t imagine how I would have figured that out by myself. I am in fact looking for a neutral/cool tone,
Re: [Digital BW] Re: Setting up an Epson 10000CF for eb6 printing?
2014-06-20 by Mark Savoia
Jimbo, two. One for the ink out and one for the pressure in. I use refillable carts and even when you take them out and pull the stopper to add more ink you
Re: [Digital BW] Re: Setting up an Epson 10000CF for eb6 printing?
2014-06-20 by mrjimbo2
Mark I don t think the 4900 is pressurized.. Look at the cart one port or two?? jimbo ... From: Mark Savoia mark@stillrivereditions.com
Re: [Digital BW] Re: Setting up an Epson 10000CF for eb6 printing?
2014-06-20 by Paul Roark
Ernst, ... It s probably just cheaper -- no pump and simpler carts. The 4000 does appear to suffer some backflow. I suspect that was the source of lots of
Re: [Digital BW] Re: Setting up an Epson 10000CF for eb6 printing?
2014-06-20 by Paul Roark
... I put my folder of materials I found on dealing with the backflow valves, with some help from Ernst, at
Re: Setting up an Epson 10000CF for eb6 printing?
2014-06-20 by geo@...
Paul and Ernst, thank you for your detailed responses, that is already a great help! Ernst, about filling the cartridges, any hint where I could find
Re: [Digital BW] Re: Setting up an Epson 10000CF for eb6 printing?
2014-06-20 by Mark Savoia
4900 is pressure carts too Mark www.stillrivereditions.com
Re: Setting up an Epson 10000CF for eb6 printing?
2014-06-20 by e.dinkla@...
Paul, you are correct. 9800 and upwards. The 10000CF and dye version were introduced together with the 7500 and 9500, the 10600 Ultrachrome with the x600 range
Re: cleaning fluid
2014-06-20 by paulmwhiting@...
Paul, This is from old thread, so I hope you ll see this! Paul R: If I were to mix a base just for cleaning, I d decrease the glycerol percentage and increase
Re: [Digital BW] Setting up an Epson 10000CF for eb6 printing?
2014-06-20 by Paul Roark
Ernst wrote: ... The 7600 carts didn t have the backflow valves or air pressurization. (I still use a 4000 that uses the same cart design and briefly ran
Re: [Digital BW] Setting up an Epson 10000CF for eb6 printing?
2014-06-20 by Ernst Dinkla
Paul Roark roark.paul@gmail.com [DigitalBlackandWhiteThePrint] schreef ... The 10000CF carts are of the same air pressurised type that Epson uses from the x600
Re: [Digital BW] Setting up an Epson 10000CF for eb6 printing?
2014-06-20 by Paul Roark
... I have never worked with an Epson 10000. However, that printer model seems to often be grouped with the 7500, which I had and ran Eboni-6 in. The 10000
Setting up an Epson 10000CF for eb6 printing?
2014-06-19 by geo@...
Hi all, first of all, thank you for this incredible resource and for sharing all this knowledge. I have studied the topics here intensely and feel ready to
Re: Epson Stylus Color 3000 Wide Format Printer : Free
2014-06-18 by berel.lutsky@...
Missed the first post, what are the details? ... Printer is Still Available ... Alex
Re: Epson Stylus Color 3000 Wide Format Printer : Free
2014-06-17 by a_pettit_jr@...
Printer is Still Available ... Alex
Flat Files for Sale - Queens, NY - Local Pick up only
2014-06-11 by faeofavalon@...
Hi gang - Just thought I d pass this on - I am selling my wooden flat files ( I moved and do not have the space for them). They are in great condition, though
Re: [Digital BW] EB6 1430 Epson Hot Press Natural
2014-06-06 by Paul Roark
For the Epson driver, try just using the Color Controls and gamma 2.2. See page 4 - 5 in http://www.paulroark.com/BW-Info/Eboni-6.pdf . It s not a bad way to
EB6 1430 Epson Hot Press Natural
2014-06-04 by eyepoet@...
OK...am getting ready to make a print. I did the quad tone rip thing back in 2004 with an 1160...but am having trouble with the latest as this is not a thing