Re: [Digital BW] Setting up a beginner BW printing system - some more questions ...
2001-08-31 by Jerry Olson
... I don t believe you can get a cis system for the EX, not the nomorecarts system, anyhow. ... Don t fool around. Get the CIS system from
Messages
Browse messages
Page 2150 of 2186 · 109257 messages matched
Re: [Digital BW] Re: Print B&W with Epson 5000 color cartridges
2001-08-31 by Carolyn Frayn
Hi Daniele, I understood you well indeed. Someone else linked you to Dan s site and book, I just corrected the link. I have gotten a lot from Dan s book but it
Re: [Digital BW] Eclipse Satine was: MIS VM Initial Impressions and Questions
2001-08-31 by Jerry Olson
Thanks Martin! Jerry
Re: [Digital BW] Re: Fade test: Museo v. EAM
2001-08-31 by Jerry Olson
The ONLY thing that truly lasts for hundreds of years are oil paintings, watercolors, guaches, and temperas painted with non fugitive pigments (Mostly earth
Re: [Digital BW] Re: Fade test: Museo v. EAM
2001-08-31 by Jerry Olson
and so lies the oddness of it all. Epson Archival Matte has fared probably the best of all papers as far as shifting/fading colors goes. No paper has done
Re: [Digital BW] Re: Culbertson's RGB method A-OK
2001-08-31 by Scott Hendershot
Martin, I didn t mean to imply that the Spectrocam was not accurate. It is. What happens is that when you are scanning a line of patches you may get a CRC
Re: Scanning HiBit
2001-08-31 by Dave Tevis
Thanks for the input. I ll check out the tutorials and work this out. Dave ... You ... ... But I ll ... The ... the ... much ... but
Re: [Digital BW] Scanning HiBit
2001-08-31 by Dave Tevis
Mike, I figured it was something like that, but still can t find anything similar in the options. Where should I be looking? I am using SF 5.1 on a mac. Dave
Re:Spectrophotometers
2001-08-31 by Tyler Boley
Antonis, thanks so much for all this info, this is great. I could have made a surer decision had I known all this. I m just going to add a few things, and to
Re: Scanning HiBit
2001-08-31 by hslavitt@cpdb.com
It sounds like your Silverfast HiBit scans do not have gamma correction (easy to do) whereas your Epson HiBit scans do. You should definitely check out Ian
Re: [Digital BW] Scanning HiBit
2001-08-31 by Johnny Deadman
... the hi bit output from Silverfast is not gamma corrected. All the information is there but to correct it in photoshop you need to do a levels command to
[Digital BW] Re: EAM Archivability WAS Fade test: Museo v. EAM
2001-08-31 by Cathy Van Berg
I hate to beat this dead horse any more, but I went back and re-read all the posts about EAM Archival Qualities. I wanted to be sure I had gotten clear info
RE: [Digital BW] Scanning HiBit
2001-08-31 by Michael J. Kravit
Dave, Hibit mode in the Silverfast software is actually a RAW file format. As such you need to check box in the options that says something like HDR OUTPUT .
re: Print B&W with Epson 5000 color cartridges
2001-08-31 by Robert Bollini
... Daniele, For what it s worth, I ve been enjoying remarkable success with a technique apparently suggested recently by Paul Caponigro in *Camera Arts* (I ve
Re: Setting up a beginner BW printing system - some more questions ...
2001-08-31 by Antonis Ricos
Jann, welcome to the group! I don t have any experience with the MIS inks, but I = use piezoBW inks with a CIS (Continuous Ink System) from nomorecarts.com.
Note to new and recent members regarding this Group.
2001-08-31 by Antonis Ricos
Here are a few suggestions that you may find helpful: - I you would rather have your name instead of a partial email address appear as the author of your
Setting up a beginner BW printing system - some more questions ...
2001-08-31 by Jann Lipka
First of all I´m astonished by this groups vitality and nice spirit . I´m learning quite a lot here while trying to figure out what setup would be best for
Re:Spectrophotometers - [ Culbertson's RGB method ]
2001-08-31 by Antonis Ricos
Martin, I have been following this discussion for a while.... As one who should have bought stock in X-Rite years ago (5-instrument deep now), here are some
Re: [Digital BW] Re: Culbertson's RGB method A-OK
2001-08-31 by Scott Hendershot
Martin, Just a few comments on the Spectrocam. It does have a high rate of communication errors when used in the scanning mode. That is one of the reasons that
[Digital BW] Re: Fade test: Museo v. EAM
2001-08-31 by Paul Roark
... There has been more discussion than evidence, I fear. Also, the green problem of Piezo on EAM is, in my view, not a problem of the paper. I would also
[Digital BW] Re: Culbertson's RGB method A-OK
2001-08-31 by Martin Wesley
Scott, Thanks for the feedback. This is definately a field where few of us have much experience. So I gather the inaccuracy with the Spectrocam occur when you
Eclipse Satine was: MIS VM Initial Impressions and Questions
2001-08-31 by Martin Wesley
Jerry, The Eclipse is made by Brightcube. You can get it from their on-line store at: http://www.photoinkjet.com/ The Brightcube papers are under:
Re: Fade test: Museo v. EAM
2001-08-31 by vanbergc@yahoo.com
I know it has been well established in the Piezo3000 group that Epson Archival Matte is not Archival at all. There was much discussion about it...I m sure
Re: [Digital BW] Re: 1160 mis quad micro banding
2001-08-31 by Randy L
Thanks for the help, I will check this out in a few days. I never thought about the paper feed (DUH). Very heavy shooting schedule right now. Randy
Re: Culbertson's RGB method A-OK
2001-08-31 by Dan Culbertson
snip . The DTP-41 is ... Robust like a good old workhorse. The Profiler Pro DTP-41 target needs a bit of editing for quadtones but I can send my edited
Re: Culbertson's RGB method A-OK
2001-08-31 by Dan Culbertson
... Yep, that is what you do. ... It is a serious social problem I know. But I haven t yet found a Productivity Tools Anonymous group so I just go with the
Re: Culbertson's RGB method A-OK
2001-08-31 by Dan Culbertson
... Might have been the processing time that fooled him. For some reason it is a much more difficult set of calculations and the profile can take a half hour
Re: [Digital BW] NoMoreCarts Replacement Part Source?
2001-08-31 by Tom Keesling
Jerry, If I understand your question correctly, no I don t have the old pump. I just got my CIS a couple of months ago and I m using what came with it. Anyway,
Fade test: Museo v. EAM
2001-08-31 by Paul Roark
I ran a fade test in my florescent light fader comparing Museo with Epson Archival Matte. The short summary is that Museo color shifts 10% less than Archival
Re: Culbertson's RGB method A-OK
2001-08-31 by Tyler Boley
... Sorry Martin, my photospectrometer experience begins and ends with the Spectrocam. Dan had a Digital Swatch book, I think he liked it. Tyler
RE: [Digital BW] Re: Culbertson's RGB method A-OK
2001-08-31 by Nij
Thanks Dan, I was wondering if the pro tag automatically lead to a relaxation of terms. BTW - have you heard - Colorvision is now Pantone Colorvision .
Scanning HiBit
2001-08-31 by Dave Tevis
This might be a tad of topic but someone here may have the answer. I am scanning 2 1/4 with my epson 1600 using Silverfast Scan software. Silverfast gives
Re: Culbertson's RGB method A-OK
2001-08-30 by Martin Wesley
... wrong. ... Profiler RGB capability into it. I guess it was easy to do and they ... hurry. However you can do a smaller patch chart spectro ... It did make
Re: [Digital BW] NoMoreCarts Replacement Part Source?
2001-08-30 by Jerry Olson
Do you have the old vacuum pump? it works fine. Mine also broke the first time I used them, but I had the old pump. Jerry
Re: [Digital BW] Re: Piezo inks versus MIS Quadtones 4 Jerry
2001-08-30 by Jerry Olson
I did try out the standard set a long time ago, and it didn t work. I haven t tried the full spectrum inks, Bernd. Jerry Have you tried the Eclipse paper?
Re: [Digital BW] Re: MIS VM Initial Impressions and Questions
2001-08-30 by Jerry Olson
Martin, I m not certain if it is the 300 gsm or 350. But it is a magnificent paper. I just love it. I ll ask steadman which it was, as I m not sure. But boy
[Digital BW] Re: Culbertson's RGB method A-OK
2001-08-30 by Dan Culbertson
... created? The license states You may not do any of the following yourself, or through any other person and you may not permit any third party with whom you
RE: [Digital BW] Re: Culbertson's RGB method A-OK
2001-08-30 by Nij
Does the license for Profiler Pro allow for resale of profiles created? Not something I want to get into right now, have many other priorities - but for the
Re: Culbertson's RGB method A-OK
2001-08-30 by Tyler Boley
One other point about the expense. Profiler Pro makes seriously great color profiles, RGB and CMYK, best I ve ever used. If you know others in your locale who
Re: Culbertson's RGB method A-OK
2001-08-30 by Dan Culbertson
Yep -- it has a scanner mode along with its spectrophotometer features. In fact it pretty much incorporates both Profiler RGB and Profiler CMYK along with the
[Digital BW] Re: Piezo inks versus MIS Quadtones
2001-08-30 by Paul Roark
... Martin wrote: ... ... I use the MIS variable-tone (VM) inkset in my 3000. The Epson driver in the 3000 is not totally dotless. However, with the quads in
Re: Culbertson's RGB method A-OK
2001-08-30 by Tyler Boley
... Yup, in the latest release it does. Basically they just built Profiler RGB capability into it. I guess it was easy to do and they thought users might want
Re: NoMoreCarts Replacement Part Source?
2001-08-30 by Tom Keesling
Thanks, Martin. After I posted, Dave at NoMoreCarts responded to my email and offered to get me some overnight. Apparently, there was an earlier batch of these
Re: Culbertson's RGB method A-OK
2001-08-30 by grdglass@aol.com
Martin, I don t think Profiler Pro works with a scanner, but I could be wrong. Helene
Re: [Digital BW] Film scanning and scratches
2001-08-30 by Daniel Bowdoin
David Dyer-Bennet wrote re nose grease . . . ... For those with exceptionally dusty noses or whose fastidious nature recoils at the whole notion of using this
Re: NoMoreCarts Replacement Part Source?
2001-08-30 by Martin Wesley
Tom, Just some wild thoughts. Look for a scientific supply store or a store that specializes in plastic tubing. Might look for some tubing at a hobby shop. By
Piezo Upgrades
2001-08-30 by Martin Wesley
For those of you who are not members of the Piezo list, or haven t been checking, Bill Bergh has announced that ConeTech will soon be releasing an upgrade to
NoMoreCarts Replacement Part Source?
2001-08-30 by Tom Keesling
I received my MIS VM-HEX inks today and am in the midst of trying to get the CIS set up. However, after getting two carts filled for my 1280, both nipples for
Re: Piezo inks versus MIS Quadtones 4 Jerry
2001-08-30 by Ruhrfoto/Bernd L.
... the dots with MIS inks on the 3000 printer. ... Jerry,did you try that out?? I´m printing MIS FS through the piezo driver on my 1160 and there are no dots
[Digital BW] Re: MIS VM Initial Impressions and Questions
2001-08-30 by Martin Wesley
Jerry, If you have the 300 gsm it is the Satine which not an RC paper but a nice art paper. If you like this, the same paper is available in 190 gsm (feels