Scott, Thanks for the feedback. This is definately a field where few of us have much experience. So I gather the inaccuracy with the Spectrocam occur when you are using it in their fixture and moving it over a test strip but if you do the patches individually they are okay? Tyler is on his third or fourth one due to defects and recalls so I am concerned about their quality control. I seem to recall in the Colormouse specs that it required 4 sec for each measurement which would slow you down, manually or automatically, on even the 127 patch test. What is the measurement time for the Spectrocam? I noticed Spectrocam's monitor calibration feature but I already have an EZColor sceen spider and if you buy the Profile Pro bundle they through in their spyder as well. Does the Spectrocam offer better quality in this area? As Tyler mentioned this is the type of thing that for me would get very heavy initial use until I was up and going with a good ink/paper combination. Once I got where I wanted to be, the instrument would see little use until some new paper or ink came along. So from that point of view it probably makes more sense to go with something slower and cheaper. Would want the highest level of accuracy though. Martin --- In DigitalBlackandWhiteThePrint@y..., "Scott Hendershot" <scott@p...> wrote: > Martin, > > Just a few comments on the Spectrocam. It does have a high rate of > communication errors when used in the scanning mode. That is one of the > reasons that I made the indexer out of a plotter. When used to make > individual measurements it works wonderfully. The guys at Spectrostar tell > me there is a new version of the software coming that has a superior > communications driver. That will improve the scanning mode, but won't affect > the way I use it. > > I beleive that my approach to indexing can be applied to the ColorMouse as > well. There are a few people with a ColorMouse that I will be working with > to see if it can be done. > > You may want to consider the Spectrocam's other features before you dismiss > it. It can make emissive measurements as well as reflected measurements > which means you can measure the color temperature of light sources and even > your monitors white point. > > Scott > (snip earlier)
Message
[Digital BW] Re: Culbertson's RGB method A-OK
2001-08-31 by Martin Wesley
Attachments
- No local attachments were found for this message.