Converting image file for quad printing w/o Photoshop?
2001-09-23 by weaver@corvusdev.com
I bought a set of the MIS quad inks for an old, large-format Epson (Stylus Pro XL) but am not able to make use of any of the suggested photoshop workflows --
Yahoo Groups archive
Messages
Page 2128 of 2186 · 109254 messages matched
2001-09-23 by weaver@corvusdev.com
I bought a set of the MIS quad inks for an old, large-format Epson (Stylus Pro XL) but am not able to make use of any of the suggested photoshop workflows --
2001-09-23 by ternahan
AHA! and thanks! I thought I was going to have to get a repair manual and/or a mechanic! t ternahan@gentlelens.net You are invited to visit:
2001-09-23 by Martin Wesley
This is the clear plastic support arm for the CIS ink tubing that holds it up above the print head carriage as the carriage moves back and forth during
2001-09-23 by charlesfrancis@mac.com
I have a set (100%, 75%, 50%, 25%)of unopened MIS quad ink cartridges for the Epson Stylus Pro 3000 for sale. I traded my 3000 and for a 5000 and I can t use
2001-09-23 by ncm
Cross post also to PiezoBW list. Sorry for inconvenience. Hi all, I ve got a friend interested in PiezographyBW who lives in hot, humid Bankok, Thailand and he
2001-09-23 by sherer@urd.umass.edu
Thank you very much for your very helpful observations. I am hoping that the MIS FS inks will soon be available for 6 color printers. Regards, Stan ... set ...
2001-09-23 by daschkenas@aol.com
Just printed the same image, same printer settings on a different paper and no posterization. Go figure. Posterization on LPM MIS pigs with DD black, on 1280
2001-09-23 by ternahan
Hey Guys...I can t always visualize the various epson parts you refer to...diagram anyone? What velcro? What arm? TIA t ternahan@gentlelens.net You are invited
2001-09-23 by Austin Franklin
... Possibly a used Leafscan or Imacon. There are other used options, such as the earlier Polaroid models...
2001-09-23 by Martin Wesley
Julian, When I got my latest CIS from NoMoreCarts for the 1280 it included some alcohol wipes to clean the contact points on the printer. I seem to have a
2001-09-23 by Julian Thomas
Adhesive failure of the bottom velcro. Julian ... From: Martin Wesley To: Sent:
2001-09-23 by Julian Thomas
Could be over manipulation in the curves box. I dumped silverfast because it was giving me posterised shadows. Julian ... From: To:
2001-09-23 by Martin Wesley
Stan, I have not used them myself since they are not available in a Hex set that would work in my 1200. I have seen three prints of the same image printed on
2001-09-23 by Martin Wesley
Tim, Julian, Is it a case of the Velcro separating or the bottom Velcro coming loose from the printer? I have problems on my 1200 due to the adhesive failure.
2001-09-23 by Martin Wesley
George, I bought a SprintScan 120 when they first came out in May and have been pleased with the quality of the scans. There is a good review at:
2001-09-23 by daschkenas@aol.com
I ve been getting some posterization / solorization looking things going on in the shadows and black areas, and I have no idea why. I m using the MIS archival
2001-09-23 by Mark Tucker
... I also bought ColorVision ProfilerPro and tried to use it with a DTP22 spectro. To put it all into perspective, I could get NOWHERE close to the accuracy
2001-09-23 by daschkenas@aol.com
Thanks to jerry & Mark for their suggestions. I do have color vision software for calibrating my monitor and profiling papers. When the CIS and the new MIS
2001-09-23 by Johnny Deadman
... Ultra Sharpen Pro I don t have but from what other folks say it probably uses a variation of this approach. There are lots of nuances in the way you crack
2001-09-23 by Austin Franklin
... Do you per chance mean the SprintScan 4000? BTW, unless Polaroid has a fire sale due to economic reasons, I doubt the SS120 will come down much in the next
2001-09-23 by George A. Dibble III
I m thinking of buying Polaroid s Sprintscan 120 film scanner so as to be able to scan my 35 & 120 film. I notice that the 35-APS version has now dropped to
2001-09-23 by grdglass@aol.com
Very nice! Exactly what are the differences between this new action and your old action? I also remember Ultra-Sharpen 3 Pro. What are the differences with
2001-09-23 by Carolyn Frayn
John, Last week I was fiddling with find edges to try a better sharpening approach... Thank you so very much for putting the pieces together, this is a great
2001-09-23 by Mark Tucker
... If I ever get married again and have a kid, will somebody please remind me never to name my kid with anywhere-near the same name as mine? -Mark Allen
2001-09-23 by Tyler Boley
... Jim, I ve tried it several times, even beta tested something for George once. I think their papers are good alternatives and have qualities of their own to
2001-09-23 by Shire,Stanley
www.johnpaulcaponigro.com ... From: Andre Vallejo To: DigitalBlackandWhiteThePrint@yahoogroups.com Sent: Saturday, September 22, 2001 7:46 PM Subject: Re:
2001-09-23 by Paul Roark
Tom, ... It would be great if we could. What I have run into, however, is that if I used a name that was more than 8 characters on my PC, at least some Macs
2001-09-23 by sherer@urd.umass.edu
Has anyone been using the MIS Full Spectrum inkset with the Cone driver? I m interested in hearing about the results. Thanks, Stan
2001-09-23 by Johnny Deadman
Anyone scanning negs may be interested in a smart sharpening tutorial I wrote which shows how it is possible to sharpen aggressively without introducing
2001-09-23 by Tom Keesling
Martin, Paul, et al, That looks good. Something else that I just thought about. If we re going to end up with lots of curves for various printer and paper
2001-09-23 by J. Arthur Davis
Tyler Buy Hawk Mountain Paper. It is not rebranded paper. It is manufactured here in the U.S. and I personally know the guy who makes it. I can absolutely
2001-09-23 by Andre Vallejo
Just found it...thanks! ... From: SKID Photography To: Sent: Sunday, September 23, 2001 1:07
2001-09-23 by Tim Spragens
Thanks Martin, I didn t find that manual in my pile on a first look but with a bit more poking around and a light lubrication of the guide rail, it seems to be
2001-09-23 by Julian Thomas
I ve gaffer taped my arms (on the CIS) after thishappened a couple of times. Julian ... From: Tim Spragens To:
2001-09-23 by Paul Roark
There has been some confusion about the relative depth of the blacks in the MIS VM inkset when used in a 7000 with Mac. Phil was kind enough to send me scans
2001-09-23 by SKID Photography
I think the desire was for a link to Paul (the father) Caponigro, not John Paul (the son) Caponigro. :- ) I did a Google Images search, and came up with
2001-09-23 by am1000@videotron.ca
Oops, the URL should have been : http://www.caponigroarts.com/ ...
2001-09-23 by Martin Wesley
Tom, Let us know how the curves work for you. I spruced up the labeling so no one else makes the same mistake. Martin ... thought ... I ... make ... (snip)
2001-09-23 by am1000@videotron.ca
J.P. Caponigro s photography is outstanding. It can be seen at: http://www.interfacedaily.com/caponigro.html
2001-09-23 by Tom Keesling
Well, that explains my disappointment with the VMH8 curves! I thought I had read all the info here and on the MIS site, but still didn t pick up on the fact
2001-09-23 by Martin Wesley
Tom, Thank you for the clarification. I am relived to know there is not some 98 vs. 2000 difference in the drivers as well as the Mac vs. PC difference. Martin
2001-09-23 by Tom Keesling
No. I m running Win98SE. When 1440 dpi is selected, the options are High Speed, Flip Horizontal, and Smooth Edge. MicroWeave and Finest Detail are grayed out.
2001-09-23 by Martin Wesley
Paul, Thanks for the feedback. Not knowing what it was doning and not seeing any improvement I have been leaving it off. I am still wondering about the
2001-09-23 by Paul Roark
Martin, I compared the prints you sent with the 1280 s smooth setting on and off. At a 800 dpi scan resolution the lines of the test chart are slightly
2001-09-23 by Martin Wesley
Tom, The vmh8 series files were developed for the 1280 running on a Mac and as people started up using the MIS VM on PC s a second set of curves came out and
2001-09-22 by Martin Wesley
Tim, Do you have the manual? There should be a section that tells you what the different light combination means. The combination you describe on my 1270 means
2001-09-22 by Andre Vallejo
Anyone aware of a link with his photographs?
2001-09-22 by SKID Photography
... If the truth be known, I m a bit worried about my/our entry. First, it s printed using classic Epson pigment color inks to make a b&W, and second,
2001-09-22 by Carolyn Frayn
Actually Harvey, you always express yourself very well indeed... (liquid heads excl)... I agree, they will outgrow it once the wow look what I can do
2001-09-22 by Martin Wesley
Mike, I was pleased to hear that ConeTech will not be charging for the software end for those upgrading to the 1280 from an existing system. That $950 price