RE: [Digital BW] Bit depth
2001-09-26 by Austin Franklin
... That s a misnomer. Analog is not infinite. It is limited by noise, and that is what dynamic range is...the largest signal over the noise. If you have a
Yahoo Groups archive
Messages
Page 2126 of 2186 · 109254 messages matched
2001-09-26 by Austin Franklin
... That s a misnomer. Analog is not infinite. It is limited by noise, and that is what dynamic range is...the largest signal over the noise. If you have a
2001-09-26 by Austin Franklin
... I didn t see you point this out anywhere in your post here... I just don t understand why we re discussing this, it s just a plain fact when representing
2001-09-26 by Todd Flashner
Austin, I m going to take a different approach here. The point/counter-point has got my head spinning. We ve spanned too many posts for me to put it all
2001-09-26 by mh@toomanyartists.com
... What he is saying is that the CCD s voltage is analog and therefore infinite. Why can t, using your above example, someone make a scanner using the more
2001-09-26 by mh@toomanyartists.com
I am glad to see that others finally got involved in the old bit depth discussion Austin and I have been having! I ll address the issues below, / ... Austin,
2001-09-26 by Austin Franklin
... A higher DR gives that, yes. ... No. Typically, the input to the A/D will be +- 3 volts, for a 6V total swing. Then each bit represents N millivolts.
2001-09-26 by Nicholas Hartmann
... Lon - On a very basic level: make sure the printer is switched on and the green light is steady (not blinking). Go back into the Chooser, highlight or
2001-09-26 by hgporter@yahoo.com
This is a cross-Post from the PiezoBW forum. Has anyone seen results from the Nikon 8000? I have read reviews from several sources and the results are mixed
2001-09-26 by tyork@accesscable.net
Hi Trish, Where did you post the images? I am very interested in selenium- toned prints and this would be a very useful guide as to how I am doing. Thank you.
2001-09-26 by Alessandro Pardi
Austin, let s see if I got it right: the DR tells us how deep the scanner can see into the film, and so higher DR values mean higher ranges of the analog
2001-09-26 by Jose Luis Martinez
Julian, ¡Great news! I ll be there. This is probalbly the first Piezo exhibition in Barcelona (¡and maybe in Spain!). ¡Can t miss it! Un saludo, Jose Luis
2001-09-26 by Kees Brandenburg
Hi, Do you have the latest 1160 driver and update? You can find them here: You have
2001-09-26 by Julian Thomas
Thanks! This is the start of something whereas the sp has been going on for 12 months. I ve just found the contact I ve been trying to find since moving
2001-09-26 by Austin Franklin
... I would agree, especially if you just index your counter off the value...then all you are taking up is more memory, but no more processing. The counters
2001-09-26 by Julian Thomas
Thanks Martin. The exhibit is of my Street stuff - only problem is as someone has just said to me no one buys streetstuff! Sad but true. Go-fly hav echeap
2001-09-26 by Jason DeFontes
It wouldn t take any longer to calculate a 16 bit histogram. To calculate the distribution of pixels values in an image you have to count every pixel. The
2001-09-26 by Todd Flashner
... Sorry His site is www.digitaldog.net, but I got it from a discussion on another list. Perhaps I ll get you the entirety of the post at a later point.
2001-09-26 by lon_c@hotmail.com
I have no experience with a Mac. I have a friend with a Mac that also has very little experience. We are trying to get an Epson 1160 printer working on his
2001-09-26 by Austin Franklin
... Where did you get that quote from? I tried www.digitaldog.com, and it s a web site about dogs...real dogs...as in woof, woof ;-)
2001-09-26 by Austin Franklin
... This is a fact. Please. Bit depth IS a limiting factor of dynamic range in the way current scanners are designed. ... Well, yes it does. I ll bet you
2001-09-26 by Austin Franklin
... I believe that s not really right. The holes in the values don t get interpolated...the holes are just left as holes. Think about it, what pixels are
2001-09-26 by Todd Flashner
... Martin, I believe this is confusing because Austin has been trying for a long time to make dynamic range a function of bit depth, and it just doesn t work
2001-09-26 by Austin Franklin
... No. It means that you need to have headroom within the space to make adjustments. ... I don t know what you mean. Be careful when you say 16 bit data .
2001-09-26 by Martin Wesley
... wrote: (snip) ... losing data. ... of a lower ... already had ... course). Todd, Austin, Let s see if I can muddy the waters here. Any time you make any
2001-09-26 by Todd Flashner
Austin, Thanks for the effort. Ready for more? ;-) ... I see, that makes sense to me. ... No, I don t want to talk about 8-bit, or about doing it in the scan.
2001-09-26 by Martin Wesley
Jerry, I think you are probably right in terms of the mechanics of the printers but if the firmware is different, then electronically they are different
2001-09-26 by Carolyn Frayn
Trish, Thank you so much for posting those wonderful photos and the comparisons of the different dilutions and time in selenium toner... Your time spent at
2001-09-26 by Andre Vallejo
There s something more in this soup,because even with the dynamic range of a chrome not being more than 3.6,a scanner about 4.3DR as the new Nikon 4000 or
2001-09-26 by Austin Franklin
... Yes, but the difference would only be 1/2 of what they show it is...since it s +/-. ... Yes, this is actually a pet peeve of mine. The current way
2001-09-26 by Austin Franklin
... Yes, on a different page than the images I was talking about! Amazing! Thanks for pointing that out.
2001-09-26 by Austin Franklin
... For 12/14 bit data setpointed (expanded) in 16 bit space, it depends on the size of the move. You can lose data by ending up having more different values
2001-09-25 by Jerry Olson
Sorry Bernd, The Printers are the same, but the DRIVERS aren t! My mistake. Also, I suppose the voltage is different... Jerry
2001-09-25 by Nij
Bernd, I am in the camp (without definite confirmation at this time) that the printers are the same barring: 1) Power supply; 2) Paper-edge sponge thinggies
2001-09-25 by ternahan
Julian, These images are very interesting indeed. Show us more! I wish I could see them on the photo rag...they come very close to glowing on my monitor. I ll
2001-09-25 by Todd Flashner
... Austin, as you can imagine I write this with great trepidation, as I m sure you will read it with with great suspect, but I d like to try to work through
2001-09-25 by ternahan
Martin, Yes, they are toned selenium prints at different dilutions (1:5 and 1:9) .... ..archival at 1:9 and warm tone at 1:5. The difference between the
2001-09-25 by Martin Wesley
Bernd, Well that certainly settles the question and makes me really wonder about Epson. Why would they do this? Hopefully it is a straightforward step change
2001-09-25 by Moreno Polloni
... There s a little disclaimer at the bottom of the page that says Images are simulated . In otherwords, the dramatic differences they re showing are BS.
2001-09-25 by Martin Wesley
Trish, I have lost track. Are these scans of untoned and selenium toned silver prints? I liked delicate tones you captured in the B&W of the orchids and the
2001-09-25 by Martin Wesley
Julian, Wish I could make your opening and see your work in person. The images on the Photo.net site are very good and very intriguing. You have an interesting
2001-09-25 by Martin Wesley
... whole ... print! ... make ... what they ... bit vs 16 ... fidelity... . That ... show is ... such as ... of 16 ... losing data. ... wouldn t be ... are
2001-09-25 by Ruhrfoto/Bernd L.
... wrote ... Martin, Jerry, I just downloaded the 1280 driver from the Epson website. It doesn´t run my 1290. Have to be patient until Paul
2001-09-25 by ternahan
The link is finally working. thanks for your patience. t ternahan@gentlelens.net You are invited to visit: http://www.photo.net/photodb/folder?folder_id=150137
2001-09-25 by Julian Thomas
Sure!! I ll post the final show later in the week. But I have some new stuff that I ve just posed to photo.net. The prints of these are the best things I ve
2001-09-25 by Jerry Olson
Bernd, it s true. they are the same printer. I get excellent results using the VM inks and Paul s curves. Jerry
2001-09-25 by ternahan
congratulations...will you post online for those of us to far away to come? t ternahan@gentlelens.net You are invited to visit:
2001-09-25 by Austin Franklin
... I believe they are not being honest here, or just plain don t know what they are talking about. There is a little link to a URL that shows 14 bit vs 16
2001-09-25 by Martin Wesley
Bernd, I am really sorry to hear there is such a difference between the 1280 and the 1290 drivers. I wonder what Epson s reasoning is for this. Did you try the
2001-09-25 by Martin Wesley
Hi Austin, Here is the URL that will get you to the spec sheet for the scanner: http://www.dimage.minolta.com/ Be sure to have your magnifying glass ready!
2001-09-25 by Austin Franklin
... I doubt it is really 16 bits... Do you have a URL that says that the actual A/D being used is a 16 bit A/D? If it were, there would be no room for tonal