[AN1x] Re: Bought Used AN1x! Having Issues -- Diagnostics
2007-02-21 by Jon
... Replace the battery as suggested in this thread...I think Pete posted the model type and number. Jon
Messages
Browse messages
Page 58 of 268 · 13386 messages matched
Re: [AN1x] Re: Bought Used AN1x! Having Issues -- Diagnostics
2007-02-21 by Ed Edwards
As a tech, this can t be preached enough: Unseat, unplug and disconnect everything possible - clean them - then reconnect and test. Don t just jiggle or
Re: [AN1x] -- fav place in th ehouse ;-) --
2007-02-21 by Ed Edwards
Nice rig. Got any solar system mission music posted? (not being sarcastic - it would be a cool theme wouldn t it?) *Ed Edwards* ...
Re: [AN1x] Re: Bought Used AN1x! Having Issues -- Diagnostics
2007-02-21 by jesse meyer
Thanks for the info. I took her apart. I removed that board and tried to push the wires back in. The ones to the volume connector moved in more, but the
Re: [AN1x] Re: Bought Used AN1x! Having Issues -- Diagnostics
2007-02-21 by Jeff
Good idea if there is no risk of lawsuit .... I can do that too, but i don t remember what is my own synth software revision... If it is possible the better
Re: [AN1x] Bought Used AN1x! Having Issues. Help!
2007-02-20 by Jeff
Hi Jesse ! 2 possible things at this point : one or more ribbon cables are disconnected inside, maybe during shipping ? a dry solder joint on a connector ? For
[AN1x] Re: Bought Used AN1x! Having Issues -- Diagnostics
2007-02-20 by pcbye111
... Before you start, you may want to pick up a NEW CR2450 Battery and replace it while your at it. I ve got one open now. First off. Get some damp bath
Re: Bought Used AN1x! Having Issues -- Diagnostics
2007-02-20 by pcbye111
Long -- Soap Box -- Reply -- Sorry! ... only 1.03 ... As far as the fix list goes, I am unaware of any fix lists published by Yamaha on any of their gear. I
Re: [AN1x] Re: Bought Used AN1x! Having Issues -- Diagnostics
2007-02-20 by jesse meyer
Thanks, I tried the diagnostic. The scene lights don t turn on and the buttons don t respond to the keypress. I tried the factory resest again and still
Re: Bought Used AN1x! Having Issues -- Diagnostics
2007-02-20 by Andrea TONI
emm sorry to ask but ... if it fixes a lot of things how come it is impossible to have a list of them ? _IF_ it is legal i don t mind making copies of the ROM
Re: Bought Used AN1x! Having Issues -- Diagnostics
2007-02-20 by pcbye111
... Greetings: Two simple things to try. First do a FULL factory reset. Power off, hold down [7] [8] [9] and power on. Select [9] for a full factory reset.
Re: [AN1x] Re: OS V1.04
2007-02-20 by Gerald Raucamp
Hey Ondrash, ... Check your swing settings. No idea where it exactly is in the mod-matrix, but there is a swing setting and pretty much describes your quantize
Re: Bought Used AN1x! Having Issues. Help!
2007-02-20 by Jon
... issues. The scene lights ... I used to have a cs1x and was ... on. Anyone else even have ... Never heard of this issue, very odd. You are correct in that
Re: [AN1x] Bought Used AN1x! Having Issues. Help!
2007-02-20 by jesse meyer
Actually, no matter what i do with the scene buttons, they don t change the sound. It s not so much that they don t light up. It s that they don t work. The
Re: [AN1x] Bought Used AN1x! Having Issues. Help!
2007-02-19 by Jeff
Hello ! ... Do you have other lazy LEDs on your synth ? No? Go to a 2 scene patch like the factory Great Morph ( nr 74) , move the mod wheel and listen....
Bought Used AN1x! Having Issues. Help!
2007-02-19 by erroneusnickname9876
I just bought a used AN1x. Got a good deal on it but having some issues. The scene lights will not come on. I reset it to factory and it s still like that. I
RE: [AN1x] Re: OS V1.04
2007-02-19 by Ondrash Daree
v :* {behavior:url(#default#VML);}o :* {behavior:url(#default#VML);}w :* {behavior:url(#default#VML);}..shape
Re: [AN1x] -- fav place in th ehouse ;-) --
2007-02-19 by Jeff
Hello Andrea ! and what s about the Ducati 996 ? Nice sound machine too ! ... You bet ! Cheers Desmodue ... avast! Antivirus: message Sortant propre. Base de
-- fav place in th ehouse ;-) --
2007-02-19 by Andrea TONI
enjoy ;-) http://members.lycos.nl/dukino/synths0.jpg http://members.lycos.nl/dukino/synths1.jpg http://members.lycos.nl/dukino/synths2.jpg finally a decent
Re: [AN1x] Re: OS V1.04
2007-02-18 by Ed Edwards
You are the first to report this, Rob. As far as I know, Yamahaha never released any info for the ROM upgrade. It was labeled as a bug fix with no further
[AN1x] Re: OS V1.04
2007-02-18 by Jon
... parts for £17) and the first thing I ve noticed is that the sequencer will now respond to MIDI start stop without having to keep you finger pressed down
Re: [AN1x] Re: OS V1.04
2007-02-18 by Rob Hill
Ok just installed the new 1.04 OS chip (which took a day to get to me from Yamaha parts for £17) and the first thing I ve noticed is that the sequencer will
[AN1x] Re: Midiclock
2007-02-16 by pcbye111
My mistake. I was operating from memory. To do a factory reset: Power Off Hold down [7] [8] [9] and power on. This will bring up a menu of various reset
RE: [AN1x] Re: Midiclock
2007-02-16 by Ondrash Daree
Hello. I have a problem todetermine OS version of An1x. :o( I am sorry. Peter, I didn’tunderstand you well. I Switch Off An1x and press7+8+9 buttons
Re: Behringer BCR2000 and PLG150-AN
2007-02-15 by Jon
... Congrats! ... MSB ... values (0- ... when ... time. ... Hahaha LOL, agreed
Re: Behringer BCR2000 and PLG150-AN
2007-02-15 by tickles88keys
I figured it out! Since only one NRPN value is allowed in the BCR2000 for both the MSB (01H) and LSB (20H) from the example above, you have to do the
Re: [AN1x] Re: Midiclock
2007-02-14 by Peter Bye
I just dug up an old E-Mail -- not that long ago -- September of 2005 Peter, Yes, there are available. AN1X part number XS467I00 version 1.04 at $36.43 and for
[AN1x] Re: Midiclock
2007-02-14 by Jon
... It is on a M27C800 EPROM. ... I think my AN1x was still under warranty when the update was released, but $40 was the going rate some time ago as posted to
Re: [AN1x] Re: Midiclock
2007-02-14 by Rob Hill
Cheers Pete I ll be calling Yamaha UK tomorrow. ;-) Peter Bye wrote: The upgrade is available from Yamaha. It
Re: [AN1x] Re: Midiclock
2007-02-14 by Peter Bye
Bob: Yes the AN1x will display the ROM version. You need to put it into Diagnostic mode: I think below you actually want to press, I think, 1, 2, 3 to go into
Re: [AN1x] Re: Midiclock
2007-02-14 by Bob S.
Does the AN1x display what OS is currently resident? Bob El Segundo, CA ... From: Peter Bye To: AN1x-list@yahoogroups.com Sent: Wednesday, February 14, 2007
Re: [AN1x] Re: Midiclock
2007-02-14 by Peter Bye
The upgrade is available from Yamaha. It is on a M27C800 EPROM. I think I paid about $40.00 USD each from Yamaha Parts for both of mine. Peter ... [Non-text
Re: [AN1x] Re: Midiclock
2007-02-14 by Rob Hill
I didn t know they did an update for the OS! Could someone please upload it into the file section of this DG? The Yamaha sites have nothing on them. Thanks
Re: Behringer BCR2000 and PLG150-AN
2007-02-14 by Jon
... 32 is for Bank Select. 74 is Brightness Either way, I m ... I downloaded a copy of their JAVA app, B-Control Editor, but I don t own either hardware
Re: Behringer BCR2000 and PLG150-AN
2007-02-13 by tickles88keys
... Brightness (cutoff ... Jon, Thanks for your reply. I m not sure where you re getting 74 for the LSB. Isn t it 20(Hex) or 32 according to the chart?
Re: Behringer BCR2000 and PLG150-AN
2007-02-13 by Jon
... Greg, It s been awhile since I ve programed RPN or NRPN strings, but here are a couple of examples. The PLG150-AN MIDI Data Format and MIDI Implementation
[AN1x] Re: Midiclock
2007-02-13 by Jon
... tempremental and and trys to corrects the timing which resulting in little crackles as the delay keeps reseting itself. ... This was supposedly fixed in OS
Re: [AN1x] Re: Midiclock
2007-02-12 by Rob Hill
Its best to use the AN1X as a slave to MIDI clock i.e use your drumcomputer as the master clock and set the temp of the AN1X to MIDI. Strangley the AN1X won t
Re: [AN1x] Re: Midiclock
2007-02-12 by Bob S.
Just to follow up on this....a little history....not all synths transmit MIDI clock, only about half of my dozen synths do. In general, early synths have
Re: Midiclock
2007-02-11 by Jon
... The AN1x does not transmit MIDI Clock. You can synchronize the AN1x Arp/Seq to an external clock - such as a drum computer - but not the other way around
Re: [AN1x] Midiclock
2007-02-11 by Jeff
Hello ! i suppose that you want to sync your drumbox with the arpeggiator or sequencer of the AN1X , right ? I ve had the opposite problem : sending unwanted
Midiclock
2007-02-11 by wllvandervliet
Can somebody help me out wiyh this? With my AN1X i want to control my drumcomputer(Tempo). With all my other synths i can do this, why not with the AN1X. I use
Re: [AN1x] Only one knob can move at a time?
2007-02-09 by Rob Hill
The An1X still makes a good master keyboard, If you link it with a MIDI knob bank (like the Doepfer Drehbank) that has MIDI merge then you get an awesome
Re: [AN1x] Only one knob can move at a time?
2007-02-09 by ras_mynameisnottaken
Yes, I can see how the current use of MIDI controller data is much more than when the AN1x was designed. It would have been a nice touch but hey... I just
Re: [AN1x] Only one knob can move at a time?
2007-02-09 by Gerald Raucamp
Hi guys, ... Heh, or build yer own! http://www.ucapps.de - midibox!! (I m looking into ways to build myself a midibox sid :D with some spare c64s on the
Re: [AN1x] Only one knob can move at a time?
2007-02-09 by Jeff
Don t be disappointed.... But it is basically an instrument with some control keyboard features, and at least you ll have one hand on the keyboard when the
Re: [AN1x] Only one knob can move at a time?
2007-02-09 by ras_mynameisnottaken
Thanks for the reply. I was hoping to use my AN1x as a control surface for som VST soft sythns, but not being able to move more than one knob at a time without
Re: [AN1x] Only one knob can move at a time?
2007-02-08 by Rob Hill
This is kinda a weak spot with the AN1x however if you assign the parameters in the mod matrix that you want to tweak to the 8 knobs in the (brown) control
Behringer BCR2000 and PLG150-AN
2007-02-08 by tickles88keys
I ve recently purchased a Behringer BCR2000 control surface for use with my Motif RackES and PLG150-AN. The BCR2000 can send control data to the PLG150-AN in
Only one knob can move at a time?
2007-02-08 by ras_mynameisnottaken
Hello, The 8 knobs on my AN1x, when more than one is moved at a time, will studder the MIDI CC data instead of sending a smooth stream. For example: I ve been