Re: [50g] How do I index my files on HP48GII
2015-03-10 by Nancy Von Essen
Hi W. Yes, you can make a list of the programs that you want to run, then access thru the list, request any input data and then display/store the result for
Messages
Browse messages
Page 1 of 24 · 1167 messages matched
How do I index my files on HP48GII
2015-03-06 by willowvst@...
The HP48GII is pretty much the same thing as the HP50g. The problem I ve run into it is not doing the calculations but finding them again. So is there any way
Re: [50g] Making a square wave on the HP48GII
2014-07-25 by willowvst@...
Thanks Ron, I will try your suggestion. I never got the sign function working (when I was trying this mixer) but I did get the mixer working! best wishes, Ed
Re: [50g] Making a square wave on the HP48GII
2014-07-01 by Don Hart
First some FYI... cos should be COS. Upper/lower case matters, including the variables (t) You don t really need C1(t)= . You can just use the righthand side
Making a square wave on the HP48GII
2014-06-30 by willowvst@...
I am making a model of a frequency mixer on the HP48GII. I need to make a square wave as part of this. The way I thought I would do it was to make a cosine
Re: So I have put togther a yourtube video on the HP Prime
2014-06-29 by Steve Huntsman
Thank you for the video. The sound is too low (insufficient) for my system to reproduce sufficient for me to understand. Have two small amplifying speakers
So I have put togther a yourtube video on the HP Prime
2014-06-17 by mpc201@...
I spent a few hours over the last few days putting together a video on the apps and in particular the solve app. Here is the link: HP Prime - Solve
RE: The role of the HP50g
2014-04-24 by <willowvst@...>
So how is the prime? You ve now had it for 3 months.
I have written a short introduction to the HP Prime
2013-11-18 by <mpc201@...>
I have written a 50 page ebook introducing the user to the HP Prime. Now I do not profess to be an author, I have never been an excellent writer, I have just
HP Prime Graphing Calculator
2013-11-04 by <STOCKCREEK@...>
I have been unable to change the language to English on my new HP Prime Graphing Calculator. I have reset and removed and the battery but that failed to bring
RE: The role of the HP50g
2013-10-20 by <vgoudreault@...>
The new hp prime is supposed to do everything the -48 did and then some (although it appears that time based alarms and beeping capabilities are missing --
Re: [50g] The role of the HP50g
2013-10-19 by Alan Golightly
heard of the new HP Prime calculator? On Wednesday, September 18, 2013 2:18 AM, willowvst@yahoo.co.uk wrote: I m reading again
The role of the HP50g
2013-09-17 by <willowvst@...>
I m reading again William C Wickes book HP48 Insights . It s a great read for anyone with a scientific bent- he was one of the designers of the original HP48
RE: Re: 50G Manuals
2013-09-16 by <willowvst@...>
I have an HP48GII - very similar to the HP50g. It s a very difficult machine to learn how to use. But there is a good manual- HP48 insights by William Wickes.
Re: [50g] Stat Frequency help needed
2013-04-01 by Juan Calle
Hello Jeremy, thanks for shearing that program, it is very impressive. Hello Jeremy, thanks for shearing that program, it is very impressive.
Re: [50g] Stat Frequency help needed
2013-03-30 by JEREMY HAWDON
Hi Guys, For cumulative frequency I prefer DOSUBS NIP ... Regards, Jeremy
Re: [50g] Stat Frequency help needed
2013-03-30 by Juan Calle
Hello Richard, I am glad you got your problem solved. I just want to point out that if you need to calculate the cumulative frequency, the program in page
Re: Stat Frequency help needed
2013-03-29 by Richard
Just did. Problem solved. The manuals for the 50g are much better than what came with the original 49g, and the large advanced users guide that you can
Re: [50g] Stat Frequency help needed
2013-03-29 by Juan Calle
Hello Richard, have you tryed the example in page 18-6 of the hp 50g s user guide?
Stat Frequency help needed
2013-03-28 by Richard
I am missing something. Can anyone highlight the correct way to build the matrix in the data entry mode for Frequencies in the Stat Module. I have six
FW: 3/15/2013 8:26:24 PM
2013-03-15 by Gareth Morris
http://www.physioth.com/jmhz/akib/grvrs/osxr/zq 3/15/2013 8:26:24 PM . Gareth Morris
Re: [50g] Re: 50G Manuals
2012-12-29 by Fatih Can
Guys, Let s admit. HP does not have enough material to support RPL. RPL is not even known by non-HP users at all. HP is not doing nothing - not enough but
Re: 50G Manuals
2012-12-24 by vjwolf3@sbcglobal.net
Thanks for the links, I will have a look at the AUR for the 49 to find out if it helps.
Re: [50g] 50G Manuals
2012-12-24 by John Kono
Assuming that you re also lumping the HP-written Advanced User s Reference Manual (AUR) in the NOT well written category, have you looked at the
Re: 50G Manuals
2012-12-23 by Ray Carrington
good question. I d like to make full use of my 50g in the construction field. As a data collector, etc. good question. I d like to make full use of my 50g
50G Manuals
2012-12-22 by vjwolf3@sbcglobal.net
Are well written manuals available for the 50G? I am of course excluding the manual written by HP as they are NOT well written.
hp 48gx books cable and docs
2012-12-15 by normn3ykf
Hi all! My 48gx is up for sale. Included are the following items db-9 to calculator cable soft case with writing on it in marker. user s guide calculus on the
Re: [50g] Re: Application Vs Hardware
2012-05-22 by Steve Huntsman
I believe it is RPL for the HP-50. RPN was the initial language style system for HP calculators. Stack limited to 4 levels. RPL started with HP-28c; stack
Re: Application Vs Hardware
2012-05-22 by vincentgoudreault
... I am not sure about that. The ENTER key on the 39 is still in the wrong place and of the wrong size. CBVG
Re: [50g] Re: Application Vs Hardware
2012-05-21 by Alan Golightly
HP15C is my all time favorite; even bought the anniversary edition. Much more user friendly than my HP50G. ________________________________ From: willowvst
Re: Application Vs Hardware
2012-05-21 by willowvst
Tried the HP15c- found it the worst of all worlds. Good calculator, but you could never remember what your program was about. I suspect HP have things about
Re: Application Vs Hardware
2012-05-21 by willowvst
You mean RPN... I was tempted by the new HP39GII with a grey scale screen; colour screens seem to be power hungry but a grey scale screen would improve the
Re: [50g] Re: Application Vs Hardware
2012-05-19 by Alan Golightly
good one ________________________________ From: vincentgoudreault To: 50g@yahoogroups.com Sent: Saturday, May 19, 2012 2:31 PM
Re: Application Vs Hardware
2012-05-19 by vincentgoudreault
... Do you answer them with the most adequate reply: HP calculators are without equals ? CBVG
Re: [50g] Re: Application Vs Hardware
2012-05-15 by Alan Golightly
I work part time as a math tutor at a local college. I get funny looks from the kids who see my 26 year old HP-15C. Where is the equal key?
Re: [50g] Re: Application Vs Hardware
2012-05-15 by Fatih Can
Having had a very happy relationship with my HP 50g, I still think it is right time for HP to come up with a new model with larger colour screen, much-easier
Re: Application Vs Hardware
2012-05-11 by willowvst
I recently came across HP48 Insights by William C. Wickes. The problem with the HP48 is it does so much; programming, calculus, the solver, statistics - it s
Re: ADDTMOD Error Condition, Help?
2012-04-28 by Richard
Don: Many thanks, that seems to have solved it. It also explains why it appeared to be intermittent. I must have drifted between modes for other reasons and
Re: [50g] serial connections on hp48GII (probably the same as the HP50G
2012-04-26 by Marcus Fazzi (Anunakin)
The Serial Cable is 20$ on http://commerce.hpcalc.org/serialcable.php 2012/4/26 willowvst ... -- *Marcus Fazzi
serial connections on hp48GII (probably the same as the HP50G
2012-04-26 by willowvst
There are two ports on this computer; one is USB and the other is probably RS232. Doesn t seem to be mentioned in the manual. Is it possible to get a cable for
Re: [50g] ADDTMOD Error Condition, Help?
2012-04-25 by Don Hart
I think you have to be in EXACT mode for ADDTMOD to work. Toggle between EXACT & APPROX with: Rightshift held down & press enter. ~~~ ASCII shall receive,
ADDTMOD Error Condition, Help?
2012-04-25 by Richard
I am probably missing something simple, but I am having intermittent problems with Modulo Arithmetic via both the soft keys and when using the ADDTMOD command
Re: synchronize 50G with emulator (emu48)
2012-03-16 by pin224466
Here s some follow up information regarding the use of port 2 vs. port 3 when archiving. This information explains the reason the backup objects show as
Re: synchronize 50G with emulator (emu48)
2012-03-09 by nate.beers
Good to know. Thanks for the update.
Re: synchronize 50G with emulator (emu48)
2012-03-09 by pin224466
with some other help, what I discovered is that the DIR object created on port 2 of the emulator CAN be used with RESTORE if you do one of the following....
Re: synchronize 50G with emulator (emu48)
2012-03-08 by nate.beers
... If you use ARCHIVE to create a backup and store it in port 1 or 2, it will be a DIR object . If you store th backup in port 3, it will be a BCKUP object
Re: synchronize 50G with emulator (emu48)
2012-03-08 by pin224466
dragging the archive file to the emu screen and then executing the RESTORE command worked to get all the variable transferred to the emulator. Now, how does
Re: [50g] synchronize 50G with emulator (emu48)
2012-03-08 by Don Hart
I m not sure if this will work, but this is what I would try first. Drag the archive file onto the calculator (the emulator). It should show up on the
synchronize 50G with emulator (emu48)
2012-03-08 by pin224466
I would like to copy all current variables, directories, programs, FLAGS, user key settings, etc from my 50G and import them to the 50G emulator (emu 48). I
Re: 50g EVAL keyboard function
2012-02-24 by vjwolf3@sbcglobal.net
You will find that the manuals are not well written and there are error s in the manual as well as lacking in proper explanation as you have experienced, this