mlcsixand78s wrote:
> Hello,
>
> I hope someone can help.
>
> I'm in search of new replacement RESISTOR TRIM POTS for my Micromoog.
> (example 1K, 10K, 100K, etc).
>
> I have had problems tuning it and someone suggested to me a
> while back (by e-mail)that replacing the trim pots should help.
> I was suggested to order from some "standard" online electornics
> supply store...but I forgot the name of the place.
>
> The trim pots are the ones mounted on main board and are about
> 10mm x 10mm in size with a plastic tuning wheel plus 4 circuit
> board mounting pins.
>
If I recall, those are standard parts. Get the model # off of them, and
go to your local electronics place, and they should be able to
cross-reference to whatever brand they carry. Don't cheap out of them
though - get some quality ones, or you will have stability problems.
They may cost $ or $5 each for good ones.
If you don't have an electronics store nearby, look up mouser and give
them a call.
--
Check out the website I've been cobbling together. It will never be done, but it's a start:
http://lateralforce.no-ip.orgMy blog, with commentary on a variety of things, including audio, mixing, equipment, etc, is at:
http://audioandmore.wordpress.com Staat heißt das kälteste aller kalten Ungeheuer. Kalt lügt es auch;
und diese Lüge kriecht aus seinem Munde: 'Ich, der Staat, bin das Volk.'
- [Friedrich Nietzsche]