Hm... I wondered about the Rogue since I have a Prodigy with the Japanese
keyboard unit and I always thought that no Prodigy came with the Pratt-Reed
keyboard. However a quick web search "confirmed" that the Rogue used P-R.
Does anyone know if Prodigy's or Rogues were ever built with Pratt-Reed
units?
mw
-----Original Message-----
From: Clive [mailto:
analogue@...]
Sent: Sunday, October 10, 2004 10:01 AM
To:
oldsynths@yahoogroups.comSubject: [oldsynths] Re: Noisy Rogue
Hi Masada,
Thanks for the fast response, I thought that before I place an order
for the bushings that I'd better check, just as well that I did.
The keyboard in my Rogue has 'Made in Japan' and 'ESK 492A' written on
it and doesn't have bushings. Upon closer inspection it does indeed
have....you guessed it!...two felt strips running the lenght of the
keyboard. To replace these will require a complete strip and removal
of all keys, but at least I know what I need to do now.
Many thanks again for your help, I'm sure others will find the link
you sent useful.
Take care,
Clive.
--- In
oldsynths@yahoogroups.com, "masada wilmot" <masada.wilmot@c...>
wrote:
> Sounds like bad rubber bushings. Check out:
>
> http://pw2.netcom.com/~arcsound/
>
> There was another supplier (Highspies, quite a bit cheaper that
arcsound)
> but they had a limited run and are now out of stock.
>
> Replace the bushings on your old P-R keyboards and it's a world of
> difference. The process is quite easy.
>
> mw
>
> -----Original Message-----
> From: Clive [mailto:analogue@i...]
> Sent: Saturday, October 09, 2004 9:48 AM
> To: oldsynths@yahoogroups.com
> Subject: [oldsynths] Noisy Rogue
>
>
>
> Afternoon everyone,
>
> I have been the proud owner of a Moog Rogue for more than 20 years,
> since I started putting a modular synth together I have used it much
> more (as a controller to start with).
>
> The problem that I have is the keys make a heck of a clunk upon
> depression and the same on release. If there is any kind of 'felt'
> dampner I'm not suprised that it's worn out.
>
> I wondered if anyone has had a similar experience with an old synth,
> and maybe the correct way to approach the problem?
>
> I'm not worried about taking the synth apart as I have done this
many
> times to clear the dust out.
>
> Any ideas would be very much appreciated.
>
> Take care now, and enjoy your weekend.
>
> Clive.
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
Yahoo! Groups Links