Looks like you copied my format! It's a perfect match with my grid. If
you want, you can put the labels underneath the jacks instead of above
(0.4 inches below center). There's enough room at the bottom. You have
0.05 inches more space there than at the top. I also suggest using the
0.2mm engraving tool.
-Richard
ithaib wrote:
> Hi all,
>
> I just designed a MOTM breakout panel for my Kenton Pro-2000.
>
> I uploaded the file to the file section. It's called:
>
> motm_kenton_pro2000.fpd
>
> It's the first time I'm using FPE. Before I go ahead and order it, can
> someone take a look at it and see if I chose all the right things
> (fonts, size, etc...). One thing I'm wondering is if the "CV1" in the
> left corner won't be covered by the screw.
>
> I'd really appreciate any input...
> Thanks in advance!
>
> Ithai B.
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>