Hi all - we got email from Scott suggesting a revision which we've
implemented. We had the scaling on the offset pots wrong - now
they're -5 to +5 instead of 0 to 10. Thanks much, Scott.
http://www.dragonflyalley.com/tellun712construction.htmBill and Will
--- In ModularSynthPanels@yahoogroups.com, "wjhall11" <wjhall@...> wrote:
>
> A late contribution - here's a MOTM design based on what we believe is
> completly standard spacing. 5U wide - but also therefore has space
> for 4 jacks Scott Juskiw, when he reviewed this design, says he'd
> taken off the 3U.
>
> http://www.dragonflyalley.com/tellun712construction.htm
>
> click on the image to download a big one.
>
> Thanks. Bill and Will
>
>
>
>
> --- In ModularSynthPanels@yahoogroups.com, Scott Juskiw <scott@> wrote:
> >
> > I believe the PKES70 knobs would fit on my 3U panel, but there
> > wouldn't be enough finger space to actually grab onto a knob and turn
> > it (not comfortably, anyway). I don't have any PKES70 knobs to test
> > with, I'm just eyeballing it with a ruler.
> >
> > >I was thinking of a 4U Doomsday Machine panel, using the PKES70 knobs
> > >instead of the PKES60. The PKES70 are about 3/4 inch in diameter
> and a good
> > >compromise between the PKES60 and PKES90. First I need to check on
> whether
> > >Scott's 3U panel would fit the larger knobs.
> > >
> > >John Loffink
> > >The Microtonal Synthesis Web Site
> > >http://www.microtonal-synthesis.com
> > >The Wavemakers Synthesizer Web Site
> > >http://www.wavemakers-synth.com
> > >
> > >
> > >> -----Original Message-----
> > >> From: ModularSynthPanels@yahoogroups.com
> > >> [mailto:ModularSynthPanels@yahoogroups.com] On Behalf Of Doug
> Wellington
> > >> Sent: Monday, July 16, 2007 10:43 PM
> > >> To: ModularSynthPanels@yahoogroups.com
> > >> Subject: Re: [ModularSynthPanels] Re: TLN-712 Doomsday Machine
> panels,
> > >> motm format
> > >>
> > >> > $40+ extra for tickmarks, and the panel is already $66. Ow!
> > >>
> > >> I'll make you a panel for only $64.95...what a bargain! ;-)
> > >>
> > >> > (you could have a screen burned for about $40)
> > >>
> > >> Actually, I went to a larger screen and I'm averaging a half dozen
> > >> designs on one $40 screen, so setup costs aren't too bad -
> that's why
> > >> I don't charge setup fees for new designs - I figure it's just the
> > >> cost of doing business. I wait until I have enough designs to
> fill a
> > >> screen, but what with all the Tellun designs and the Thomas Henry
> > >> stuff going on, I'll probably make two, maybe three new screens
> in the
> > >> next week or two. It takes me longer to set up the jig to align
> > >> everything than it does to make the screen itself...
> > >>
> > >> Of course, for something big like the Milton, P3, Midibox SEQ, or
> > >> MB808, I sometimes end up using one screen for each design.
And the
> > >> MB808 has five colors, so there are multiple screens...
> > >>
> > >> --
> > >> -Doug
> > > >
> > >
> >
>