Yes, that's the concensus -- a three-wire LED or two LEDs.
I know I'm a bit daft 'n' all that, but do you really need a green LED
to tell you that the red LED is off?
; p
But there's plenty of panel space for a green one if you need it, want
it, gotta have it -- blinky lights are one of the best parts of a
modular.
Because, after mocking like I did... I'll use a three-wire, or drill a
hole for the green LED!
Cheers,
Scott Deyo
The Bridechamber
contact@...http://www.bridechamber.comJealous Edison Record Kompany
http://www.jealousedison.com On May 5, 2008, at 7:29 PM, Mark wrote:
> On 5/5/08, loopcycle put forth:
> >at the risk of coming off as a complete idiot here...how do i wire
> the led?
> >i got the red/green flat lumex led which has two leads per
> bill&will's bom.
> >but the up/down is on the pcb separately. can someone help me with
> wiring?
> >(i expected the led to have three leads, honestly. i dunno?)
> >thanks.
>
> Not that I'm there yet, but from looking at the schematic, and from I
> think I remember JH said on the electro-music forum, you can't use a
> two-wire led such as the red/green flat fresnel Lumex used by MOTM.
> You need either a three-wire led or two separate leds.
>
>
>