CS-80 Chorus question
2005-05-12 by oasysfan2
Greetings. This is my second post to the group. I ve been lurking a while, and enjoyed reading every post from the beginning. I m impressed by the knowledge

Yahoo Groups archive
Archive for yamahacs80.
Messages
Page 90 of 95 · 4740 messages matched
2005-05-12 by oasysfan2
Greetings. This is my second post to the group. I ve been lurking a while, and enjoyed reading every post from the beginning. I m impressed by the knowledge
2005-05-12 by Max Fazio
Thx oasys fan! ... From: oasysfan2 To: yamahacs80@yahoogroups.com Sent: Wednesday, May 11, 2005 10:19 PM Subject: [yamahacs80] Re: Chorus /Tremolo and Initial
2005-05-12 by Max Fazio
Hi all I badly need infos and datas about Chorus : delay time in the MN3005 chip, depth values, and, when possible, a graphic spectrum of a single saw
2005-05-11 by oasysfan2
... I don t have firsthand knowledge as I don t own a CS-80, but according to p. 13 of the manual, tremolo can be active without chorus.
2005-05-06 by dscr22
I was checking out another keyboard to buy here in Chicago. It s always interesting going to see another collector s stuff. The last two guys I visited were
2005-05-05 by Max Fazio
Can anyone tell me 1. can Tremolo work alone from Chorus ? 2. Being BBD based, what is the delay time and the wet/dry balance ? 3 what is the highest
2005-05-05 by groovedoctor23
What s happen now there is no cs80 on ebay. Yesterday
2005-05-05 by dscr22
The idea is that one person can set it up if you put the round parts to the back. Wheel it into position, hook up the legs while it s still sideways on the
2005-05-04 by The Old Crow
Well, I am in Chicago now.... ;) ... Crow http://www.cs80.com/ /**/
2005-05-04 by james devero
The Old Crow-Hello Are you located in Chicago? Really....that would make a huge difference in my decision. Kind regards, J D The Old Crow
2005-05-04 by David Rogoff
... I always thought the stand went that way. On the CS-80s and CS-60 I had that had the stands, that s how I set it up. It was only a few weeks ago that I
2005-05-04 by Quazimodo
Yeah, and why is the stand back-to-front .... ? Strange. TOM
2005-05-04 by dscr22
7319968371 should be the one. The UK one pops up from time to time, copied direct from an auction that I assume was legit out of Vancouver a couple years back.
2005-05-04 by David Rogoff
... Hi, Does anyone still have the UK CS80 auction in cache? I was going to email the seller to ask a question, but the auction is gone now. I d appreciate
2005-05-04 by BlchrR@aol.com
Hi, Whats the item number for that Cs80 on Ebay in the US? Or better still a link would be good ; ) I cant seem to see it all i can see is a Cs80 for sale in
2005-05-04 by dscr22
All good advice. That repeated auction thing is a very common scam. Don t be tempted to contact those people because some can be very sophisticated in the
2005-05-04 by Max Fazio
Hi all Unfortunately no one could give me any datas about CS-80 s Chorus/Tremolo section. Can anyone tell me 1. can Tremolo work alone from Chorus ? 2. Being
2005-05-04 by wavecomputer360
Yes, you´re right, Rob! I would love to find a tech in Germany who has the guts to tweak a CS80... but I won´t toss it down two flights of stairs in the near
2005-05-04 by Max Fazio
Hi all Unfortunately no one could give me any datas about CS-80 s Chorus/Tremolo section. Can anyone tell me 1. can Tremolo work alone from Chorus ? 2. Being
2005-05-04 by BlchrR@aol.com
Ok, im convincing you... Buy it, you would be mad not to, get it, get it tuned and midied and wow, you have the most amazing synth ever made. Regards, Rob.
2005-05-04 by james devero
Its actually not that unreasonably priced at $3500.... I m thinking about it...The shipping to Chicago can be as low as $500- but more likely $700-$900. If I
2005-05-03 by wavecomputer360
To me all these sellers seem a bit fishy... Christophe Harbonnier of Lightwave sold his PS3300 through eBay last week, and the other the same PS3300 picture
2005-05-03 by dscr22
Concord California. Based on the last year or so, and the pictures and accessories, it s priced competitively. Seller doesn t appear to have a particularly
2005-05-01 by Jim Combs
Samples from the 2 new TouchXtone CDs, Astroboy and headmiX, have been posted at: http://www.touchxtone.com/mp3s/AstroboySamples.mp3
2005-04-29 by Max Fazio
Hi all Can anyone tell me how exactly the Trem/Chor circuit works? I think the original works in a very different way from the actual fx circuit implemented
2005-04-20 by Daniel Araya
A few weeks ago I wrote a mail about one of the waveconverters sounding different from the other 15, and yesterday I desoldered the different sounding one and
2005-04-16 by The Old Crow
Many of the early/mid 1970s to early 1980 Electone organs used parts that the Electone team also used in the CS line. Many of the C-, D- and E-series organs
2005-04-15 by Quazimodo
No answers to this question of mine yet, just incase you missed it first time... ... worthwhile.
2005-04-13 by David Rogoff
There s two CS-50s and an SY-1 on eBay at the moment. That s all I know! If anyone knows about them, or buys them, let us know. David
2005-04-13 by Max Fazio
Thx Crow I already knew your wonderful study , I just didn t remember you put also the oscilloscope view of the inverted saw. Thx again! Max ... From: The Old
2005-04-13 by The Old Crow
My study of the IG00153 VCO is here: http://www.cs80.com/vco.html The output ofthe 153 is a sawtooth. The output of the 158 is the inverted sawtooth. This is
2005-04-13 by Daniel Araya
I have a squarewave-problem on one oscillator so I have the oscilloscope hooked up. I ll try to take a picture for you tonight. /Daniel ... Hi all Can anybody
2005-04-13 by Max Fazio
Hi all Can anybody give me details about the CS-80 square wave ? Is it a regular shaped wave or is it distorted? Anyone did any measure process? about the
2005-04-09 by Max Fazio
Thx a LOT!! Max ... From: rreprobate To: yamahacs80@yahoogroups.com Sent: Tuesday, April 05, 2005 4:44 PM Subject: [yamahacs80] Re: aftertouch values Hi This
2005-04-07 by Quazimodo
Hi guys, I seem to remember, maybe it was Crow, saying that there were CS80 compatible useful parts inside your basic Yammy home organs. Could some one
2005-04-07 by STEPHEN TELLER
Thanks for the reply Crow My tech is wondering if you could have possibly meant the 4013 s from a TSB board instead of the 4050 s from the KAS board? He can t
2005-04-05 by Daniel Araya
Hi My name i Daniel Araya and i m trying to fix a sick CS80 for a friend. I have gotten it to sing a bit and so far I have fixed a broken oscillator, noise,
2005-04-05 by rreprobate
Hi This information is in the CS-80 owners manual. There are patch sheets for all the pre-set voices. On the aftertouch sliders, there are 6 tick marks, with 1
2005-04-04 by Max Fazio
Hi all Is anyone aware of the aftertouch values in presets BRASS 1-2-3 ? I don t know the real instrument as good as you but this can be helpful to better
2005-04-04 by The Old Crow
Educated guess: replace IC4 & IC5 on the KAS board. It sounds like a note encoder line (_N3, to be exact) is not operating correctly. Crow /**/
2005-04-03 by STEPHEN TELLER
from my tech Hi I m working on a CS80 for the first time in years. I am looking at the after touch areas of this one, and after replacing and socketing all
2005-03-20 by Marcel de Velde
I m located in the Netherlands and have a mint Yamaha CS-50 for sale. Comes with case and origional standard. Cosmetically truly as new. In tune and never
2005-03-18 by david@therogoffs.com
... True: I think Rory meant CS*, but that brings up Yamaha CS series guitars, too. David
2005-03-18 by david@therogoffs.com
... It will only match CS followed by a space, followed by 60 . Without the quotes, it could match lots of things, like CS this is random text 60 or I m
2005-03-18 by Wheaton, Simon
What does the do in CS 60 ? Simon Canberra AUSTRALIA ________________________________ From: David Rogoff [mailto:david@therogoffs.com] Sent: Sat 19/03/2005
2005-03-18 by Wheaton, Simon
I didn t think Yamaha CS would bring up Yamaha CS80, Yamaha CS60, Yamaha CS50, etc. It would bring up Yamaha CS-80, Yamaha CS-60, Yamaha CS-50, etc. Simon
2005-03-18 by Rory Mc Donald
Simply Yamaha CS brings them all up ... Regards, Rory McDonald The following are missing from your list: CS-01 CS-5 CS-10 CS-15 CS-20M CS-30 CS-30L CS-40M
2005-03-18 by enmach@aol.com
The following are missing from your list: CS-01 CS-5 CS-10 CS-15 CS-20M CS-30 CS-30L CS-40M CS-70(M?) While they may not of interest to you as instruments,
2005-03-18 by David Rogoff
And now another CS50 in Texas. FYI, my CS-finder search on ebay is this: yamaha (gx1, gx-1, sy-1, sy-2, ex-1, ex-2, ex1, ex2, cs80, cs-80, cs 80 , cs60,
2005-03-15 by David Rogoff
FYI: There s a CS60 (Pennsylvania) and a CS50 (Florida) up on eBay at the moment. Don t know any more about them. David