R: [yamahacs80] Re: KAS bug examples
2011-07-25 by faxiomas@virgilio.it
Thx again, Mike; by the way, is this tendency to drift linked to the Sustain/release lenght? I mean, if the Sustain is has long, mid or short ranges, does this

Yahoo Groups archive
Messages
Page 26 of 95 · 4740 messages matched
2011-07-25 by faxiomas@virgilio.it
Thx again, Mike; by the way, is this tendency to drift linked to the Sustain/release lenght? I mean, if the Sustain is has long, mid or short ranges, does this
2011-07-25 by Mike
It s really annoying and yes it does happen a lot. Also, they can drift up too which is really fun. I ve got a machine right now that is doing it. There is
2011-07-25 by Mike
The pitch drift manifests itself when the octave buffer shifts - for example, if playing a high note causes the DC octave buffer to shift from 2 and end at 4
2011-07-25 by lucidsound
The Sustain I bug is the exact problem I described on here a while ago, and hardly anyone seemed to have come across it before, which surprised me as I ve seen
2011-07-25 by faxiomas@virgilio.it
Hi Mike Thx for replying; actually I can have two references, one is Fernando s machine, the other is a 60: to be honest I didn t realise such a flaw until you
2011-07-25 by Mike
I m planning on putting all of the troubleshooting results on my own website in the near future because I need full HTML to reference pictures, audio, and
2011-07-23 by David
I just changed email and webhosting companies and had not put back my website. I finally figured out all the magic FTP info and it s uploading right now. Nice
2011-07-23 by Max Fazio
Hi again This is for Mike: have you managed to record any example of the supposed KAS bug? Let me know! M [Non-text portions of this message have been
2011-07-23 by Max Fazio
Hi all Paging David about his CS Manuals hosting, it s currently down! What happened? Please let me know! M [Non-text portions of this message have been
2011-07-23 by Mike
I can fix your CS-80 for you. I have parts too. Give me a call. -Mike 312-363-7286
2011-07-22 by Jason Serber
Yamaha YM24800 Would anyone know where i can get my hands on this chip? Yamaha YM24800 thanks Jason [Non-text portions of this message have been removed]
2011-07-22 by Gordon Gebert
Anyone recommend a Yamaha CS-80 tech (restoration and possible MIDI retrofit) near New York? [Non-text portions of this message have been removed]
2011-07-21 by dzlvs8@yahoo.com
I m not sure give me a call. I don t even know what board that chip is on. Steve 810-931-0725 Sent from my Droid Charge on Verizon 4GLTE ... From: Jason
2011-07-21 by Jason Serber
Hi Doug, do you have a yamaha YM24800 chip available? please let meknow, thanks! Jason ... [Non-text portions of this message have been removed]
2011-07-15 by Andrew Kirkby
Tom, Given that this is a CS 60 there are no TSB or TKC boards. I will swap out that IC12 on the KAS and see if the issue remains. INverting voltage on that
2011-07-15 by Quazimodo
Hi Andrew, The only time I ever had anything similar to this was a fault affecting mainly the after touch - but also, I seem to remember there were actual
2011-07-15 by Andrew Kirkby
ok, So, all keys up until the top D key work fine. If i press a single key above top D i get no sound whatsoever BUT if i hold a key below the top D key and
2011-07-15 by Quazimodo
That don t make sense... can you explain it better Andrew..! ...unless a key from an octave below it ...?
2011-07-15 by Andrew Kirkby
Tom, It looks like a trace lifted when i put the board back. Fixed that and now it works perfectly :) I now have another problem on the top octave now - i
2011-07-14 by Quazimodo
If it was working before you changed the caps then I would suspect it is something you have done. Treble check all your work..!!! Cheers, TOM
2011-07-14 by Andrew Kirkby
Hello all, I am restoring a PSU in a CS60 and after recapping i have no +15v but the +8.5 is fine. I m thinking it could be the power transistor attached to
2011-07-11 by ostrovitch
Thanks for this useful information. Recently I planed to make a full calibration of my CS80, (it ll be my first time), like this if I face such problem, I
2011-07-11 by Quazimodo
Thanks for the update David, Good to know those causes if ever we come across similar problems...;c) On a little O/T note - I have done two restoration/repair
2011-07-11 by David
Hi all. I was doing a few little repairs on a CS80 yesterday and saw some odd stuff. First, there was a VCA EG that would not calibrate. It was impossible to
2011-06-30 by Mike
I m a competent technician that can do house calls. Give me a call at 312-363-7286 if you are interested in discussing the matter. -Mike
2011-06-30 by Constantin
I would like someone to come to my place and calibrate a CS80, so I don t have to move it. LEt me know if you know of anyone. Also if you know of a reliable
2011-06-25 by jdelgoulet
Thanks a lot for your advise Ted ! I m guess I should do it a good cleaning then you are right. Even if it is tuned, I need to know how to do it cos one day
2011-06-25 by T.M. Bois
The first thing I would check is the tuning pot for that voice. I have a couple in my CS80 that are *very* fussy, in that moving them just a little bit
2011-06-25 by jdelgoulet
HI all, THis is my first post in this group ... I m the proud owner of a CS50 that causes me troubles... When I play it everything is fine the first 60
2011-06-25 by jdelgoulet
HI all, THis is my first post in this group ... I m the proud owner of a CS50 that causes me troubles... When I play it everything is fine the first 60
2011-06-22 by ostrovitch
Hello, Does anyone having made a Level 1 restoration by Kent Spong, could tell me what are the elements that are supposed to be renovated? What s the content?
2011-06-21 by Fernando Zarone
As to the VCF adjustment procedure reported by Yamaha for the CS-80, I have some considerations / questions for those who already faced such a task. 1) In HPF
2011-06-19 by faxiomas@virgilio.it
My very personal opinion: there CAN T be a reissue (oh, and I was ironic in my previous message ;-) ) The Combo Synthesizer 80 is something we love but our
2011-06-19 by J. Douglas Rodriguez
Look up Stephan Schmidt s synthesizer. It s not a CS-80, but for a polyphonic analog keyboard, it looks and sounds sexy. Too bad it s a one-off. It s nice to
2011-06-18 by François Globensky
There will never, ever be anything close to the CS-80 because of the progress or evolution. Too bad! le Doc De : ostrovitch À :
2011-06-17 by ostrovitch
Dreaming? Yes. Hoping? No!! Yamaha ran into deep digital forever, I couldn t believe they redo it. And I don t know if they would provide a so amazing keyboard
2011-06-17 by faxiomas@virgilio.it
One new for me too, I ll let it season for 20 years then play it, it should be treated like the great wines ;-) M ... Da: laurie@ronchmusic.com Data:
2011-06-17 by Laurie Curry
Id love one thanks... can t have too many CS80 s ... From: Quazimodo To: yamahacs80@yahoogroups.com Date: 06/16/2011 20:14
2011-06-17 by Laurie Curry
Id love one... thanks.... cant have too many CS80 s ... From: Quazimodo To: yamahacs80@yahoogroups.com Date: 06/16/2011 20:14
2011-06-17 by Quazimodo
Yes, but just like the original Minimoog is still the best (I have three of them!) - the original CS-80 will still be unbeaten (I have two of them!)...;c)
2011-06-17 by Mario
Is anyone here hoping Yamaha will come out with a new version of the CS-80? Of course, this new version would have to address all the problems associated with
2011-06-14 by system_700
Thanks for your help!
2011-06-14 by jkjelec@comcast.net
Congratulations for getting your CS-80! I ve never gone through the filter cal procedure end-to-end, but I have always thought that the service manual s VCF
2011-06-14 by system_700
After a year and a half in the shop, my tech is almost finished with my CS-80. If it works like I m hoping it will have been worth the wait! But now he s
2011-06-12 by Fernando Zarone
I trade a working PRA Board for a KBC board. Anyone interested? I shall not sell it for money, just swap it for other boards I need... Fernando
2011-06-11 by Jeroen
Hey all, I was wondering if someone could point me to a better understanding / diagnose of some ribbon weirdness on my CS60. It¹s currently unhooked (the two
2011-06-08 by dzlvs8@yahoo.com
Doug, On a side note, I think you may have bought a broken polysix from me before. I either sold it to you or the synth spa. Cant remember. Well, yet again
2011-06-07 by synthparts
Hi Mike, I have the dual tune pot and if you need any other CS parts just let me know. I know I ve shipped you parts before. Doug synthparts.com
2011-06-07 by David
Mike and Steve and anyone else - this group is not the place for people to argue over business deals. One or two posts to ask the group about getting in touch
2011-06-07 by Mike
Professionals actually ship stuff when people pay them. Since you re having trouble with details, I called you and begged you to send me my stuff so I could