Re: [yamahacs80] Adjust release on CS 60?
2011-10-25 by David Rogoff
Hi there. You night have seen some discussions about this a few months ago. I had a hell of a time trying to calibrate a couple of CS80 envelopes. The same
Messages
Browse messages
Page 25 of 95 · 4740 messages matched
Adjust release on CS 60?
2011-10-25 by Rainer
I ve looked through the adjustment procedures for the CS 60 and was wondering if it is possible to adjust the VCA or VCF release times for each voice? there is
Re: [yamahacs80] IC m51623p ???
2011-10-25 by Fernando Zarone
Yes, the M5162*p ICs work as well as the corresponding IG****. I don t know whether this is a last rev of the machine, but it is from the factory for sure.
Re: [yamahacs80] Re: IC m51623p ???
2011-10-25 by jkjelec@comcast.net
I was thinking the same thing. It s eems to me tha t this means it is even more important to focus on tuning the instrument when it s in it s warm, working
Re: IC m51623p ???
2011-10-25 by Quazimodo
I don t think we have the luxury of choosing and fine tuning the IG Osc IC s any more - or do we...? I always thought you d go with the IC you managed to
Re: [yamahacs80] IC m51623p ???
2011-10-25 by Fernando Zarone
Thanks, friends, yes, the ICs are the same; and they work, as seen on the oscilloscope at their outputs, so, fortunately, it could be a wire problem… I ll
RE: [yamahacs80] IC m51623p ???
2011-10-25 by John Leimseider
Has anyone seen any failures of the newer unranked oscillators? I haven t, so far. John Leimseider Electronics Technician/ Technicien des instruments
Re: IC m51623p ???
2011-10-25 by Rainer
That s what I suspected indeed. I just used the site to point out that at least those people indicate that the TS s part numbers should be the same as the
Re: IC m51623p ???
2011-10-25 by Quazimodo
And you try buying one off them... these guys advertise as if they have everything. Then, when you try getting one off them they say they will have to order
Re: IC m51623p ???
2011-10-25 by Rainer
Regarding the voices not playing: check the contacts and conduction of all the (very thin...) wires running to the voice boards, if one them is faulty the
Re: IC m51623p ???
2011-10-25 by Rainer
According to this site, it appears to be the same part number: http://www.wdgreenhill.com/manu/yamaha_s.htm
[yamahacs80] IC m51623p ???
2011-10-24 by papinje
Hi all, after completing (9 months work...) the overhauling of the CS80, that is amazingly playing now, I have opened a friends CS60, that doesn t work (as
primo cs80 for sale
2011-10-18 by Larry Loyet
Have A1 instrument, complete in tune, all working order. In my studio for 20 years, no road. Would like to sell to good home to someone who will use it more
Update: For sale CS80 voice card and TRG card
2011-10-17 by blchrr@homecall.co.uk
Hello chaps, Just to update, have sold the KBC board and have 1x voice card and 1x trg board left. The TRG board has 24x IG00151 VCA chips on it and i think is
Re: CS80 parts
2011-10-14 by blchrr@homecall.co.uk
Hi guys, Following on from my post last night about the cs80 parts, i have decided to see some of them. Ive lowered the prices too, i feel the prices are fair
Re: [yamahacs80] spot the CS80 in my new track
2011-10-14 by Alessandro Rescio
Hi Tim, thanks for listening. I used Omnisphere and kontakt for the other instruments. I layered 5 (or 6) sounds with the Rhodes for more organic feel.
Re: [yamahacs80] Re: CS80 parts
2011-10-14 by Fredrik Segerfalk
Yes, I know :) Let me think about it, and thanks for your reply. ... -- Fredrik Segerfalk phone +46 709 410988 skype segerfalk www.segerfalk.com
Re: CS80 parts
2011-10-14 by blchrr@homecall.co.uk
Hi Fredrik, :) I am asking £300 for them and i have 2 for sale in total. Plus i also have 1 TRG board available, which has 24 IG00151 VCA chips on it (CS80
Re: [yamahacs80] CS80 parts
2011-10-14 by Fredrik Segerfalk
Hi, please hit me with a price for a voice card :) best regards, -- Fredrik Segerfalk phone +46 709 410988 skype segerfalk www.segerfalk.com
CS80 parts
2011-10-13 by blchrr@homecall.co.uk
Hi guys, For a number of years ive been hanging onto some cs80 parts, basically i want to be able to keep mine running and always have parts in the event of it
Re: [yamahacs80] spot the CS80 in my new track
2011-10-13 by Tim Siefkes
Quite nicely done, I enjoyed it very much! And I m enjoying it again right now. Can you fill us in on what other instruments you used? -Tim ... [Non-text
Re: [yamahacs80] spot the CS80 in my new track
2011-10-12 by Alessandro Rescio
Hi Max, thanks, yes i also used a pwm based pad :)Alessandro ... From: Max Fazio Subject: Re: [yamahacs80] spot the CS80 in my new track
Re: [yamahacs80] spot the CS80 in my new track
2011-10-12 by Max Fazio
Fantastic! What makes it outstanding is its soothing athmosphere , suddendly broken by the entrance of the brass; by the way , it seems you used also a pwm
spot the CS80 in my new track
2011-10-09 by Rescio
Hi guys, its been a while since i post something here. I made a new track it is sort of a lullaby so expect NO heavy stuff only a moody melodic track with a
Re: WTB: IG00158 Waveshape converter IC
2011-10-06 by jkjelec@comcast.net
Great Doug, Thanks so much for making these available! Regards, jkjelec ... From: synthparts To: yamahacs80@yahoogroups.com Sent:
Re: WTB: IG00158 Waveshape converter IC
2011-10-06 by synthparts
Hi Kyle, I have one, check my web page. Doug synthparts.com
WTB: IG00158 Waveshape converter IC
2011-10-05 by jkjelec@comcast.net
Hi All, Darn it! I ha d to take my last working IG00158 from my golden voice board to fin ish up on a repair, so my golden board is now missing its
Re: [yamahacs80] VCF EG problem -update
2011-09-13 by Fernando Zarone
I have to rectify my previous message. Checking better the oscilloscope 0 V calibration, I have noticed the following: in ch II, in the voice 22, that I
Re: Tuning
2011-09-13 by Quazimodo
Hehe... would you pay the air fare...!?
Tuning
2011-09-13 by kecmagnum
Hi, I m looking for someone who could come over to Belgium and help me with tuning my CS-80. Thanks,
[yamahacs80] VCF EG problem
2011-09-12 by Fernando Zarone
Hi all, after about 8 months (8!) I am going to complete the overhauling / calibration of my CS80. The only problem I have now is that in one voice the EG
ELP tribute this weekend...
2011-08-22 by Quazimodo
Just to let group members know that I am out with my Emerson Lake and Palmer tribute band - Noddy s Puncture and will be playing three gigs in East Sussex,
Re: [yamahacs80] translation from Japanese
2011-08-20 by Daniel Forró
I can. Daniel Forro
Re: translation from Japanese
2011-08-19 by Quazimodo
I may be able to help if you let me have a scan of the text Max. Cheers, TOM
translation from Japanese
2011-08-19 by Max Fazio
Hi all I d need some help with anybody here speaking Japanese: could anybody help me translating some few words I found in a document? Thx for help! M
Re[2]: R: Re: [yamahacs80] External input
2011-08-05 by Laurie Curry
I mentioned before, I like outputing the CS80 to a leslie and then miking the horn back into the CS80 sub osc input to add overdrive with the brilliance
Re: R: Re: [yamahacs80] External input
2011-08-04 by royce
On the CS50, I use another polysynth (jp8) to feed the external input. Octaves and fifths provide more the most musical modulation, especially when modulating
R: Re: [yamahacs80] External input
2011-08-04 by faxiomas@virgilio.it
Nice one, Laurie!I found some interesting videos http://www.youtube.com/watch?v=E3PLjAKDPOw CS10 going nuts while feeding back its own output into the EXT in
Re: [yamahacs80] External input
2011-08-04 by Laurie Curry
yes... Ive sent lots in to it.... you can plug a mike into it and talk ... From: faxiomas@virgilio.it To: yamahacs80@yahoogroups.com Date: 08/03/2011 18:07
External input
2011-08-03 by faxiomas@virgilio.it
Hi allI was wondering what use did the owners here made of the external modulation input, I mean did anybody try to modulate the CS80 through a drum machine,
Re: Ring Modulator mods
2011-08-03 by Mike
The easiest way to go about it would be to multiply the envelope parameter durations by replacing the 0.22uf cap on Pin 2 BI (non-inverting buffer input) of
Re: [yamahacs80] Ring Modulator mods
2011-08-03 by rj krohn
that s actually a great idea. as much as i have no interest in modding my cs80, longer max EG time on the ring mod would be super cool.
Ring Modulator mods
2011-08-02 by faxiomas@virgilio.it
Hi allI d like to get longer envelope times on the AD used for the ring modulator; where may I look at?Let me know!M [Non-text portions of this message have
R: RE: [yamahacs80] Paging Scott Metzger
2011-07-28 by faxiomas@virgilio.it
OOps sorry, that was intended as a PM, apologies again... M ... Da: faxiomas@virgilio.it Data: 28-lug-2011 23.32 A: Ogg: R: RE:
R: RE: [yamahacs80] Paging Scott Metzger
2011-07-28 by faxiomas@virgilio.it
Hi Scott Thx for replying! By chance I got to know you re busy with graphic fx design so I thought you were hard working on some new project, nevermind Can I
RE: [yamahacs80] Paging Scott Metzger
2011-07-28 by Scott Metzger
I am so sorry.. I have been totally slammed with career stuff.. To be honest, I haven t turned on a synth in 4 months. add me on facebook.com/metzger and
Paging Scott Metzger
2011-07-28 by faxiomas@virgilio.it
Please welcome my apologies for the private usage of this list Scott, if you re reading this and you re not too busy , can you drop me a line ? I still need
Re: [yamahacs80] Re: Yamaha CS-15 IG chips
2011-07-28 by dzlvs8@yahoo.com
no. i think i sold that entire board with it on there. i will double check tomorrow though. Sent from my Droid Charge on Verizon 4GLTE ... From: Jason Serber
Re: [yamahacs80] Re: Yamaha CS-15 IG chips
2011-07-28 by Jason Serber
Steve, did youmanage to find this chip at all? thanks Jason ... [Non-text portions of this message have been removed]
R: [yamahacs80] Re: KAS bug examples
2011-07-25 by Mike
Yes. It sounds logarithmic to my ear, not linear. It is pretty well documented in other threads in this forum. Switching to sustain II while they pitches