Synth-DIY Yahoo! Groups Archives

Thread

Tap Combo's

2003-03-31 by erik_magrini@Baxter.com

Ummm... yeah... one step ahead of you... where we going again?  :) 

Actually I don't think the new Tap combo's are that hard to remember in 
use, so I probably won't be making any stickers to put on my box. 
Interesting idea for PX-7 though, they should silkscreen those in 
different colors or something on the panel. (hint hint Emu).

rEalm




I noticed that there's a lot of additinal short-cuts in V2.0 - I think it
would be a good idea to print out some stickers to go under the "tap'd" 
keys
so I know what the hell's going on...

I'm sure ReAlm is one step ahead of us...



[Non-text portions of this message have been removed]

RE: [xl7] Tap Combo's

2003-03-31 by erik_magrini@Baxter.com

Definitely do able.  You could even take it to a glass store and get it 
etched into a sheet of 1/16th plexiglass if you wanted something a little 
more durable and nicer looking than cardboard.  As long as you give them a 
template, it's not too expensive to do this.  I had something similar done 
back when I used to compete in car audio contests, it was cheaper than I 
thought it would be.

rEalm



Or we could make a thin cardboard cuttout to drop over the whole thing, 
word
template style.




[Non-text portions of this message have been removed]

RE: [xl7] Tap Combo's

2003-03-31 by Andre Lewis

Or we could make a thin cardboard cuttout to drop over the whole thing, word
template style.

Andre

Show quoted textHide quoted text

-----Original Message-----
From: erik_magrini@... [mailto:erik_magrini@...]
Sent: Monday, March 31, 2003 11:22 AM
To: xl7@yahoogroups.com
Subject: [xl7] Tap Combo's

Ummm... yeah... one step ahead of you... where we going again?  :)

Actually I don't think the new Tap combo's are that hard to remember in
use, so I probably won't be making any stickers to put on my box.
Interesting idea for PX-7 though, they should silkscreen those in
different colors or something on the panel. (hint hint Emu).

rEalm

I noticed that there's a lot of additinal short-cuts in V2.0 - I think it
would be a good idea to print out some stickers to go under the "tap'd"
keys
so I know what the hell's going on...

I'm sure ReAlm is one step ahead of us...

[Non-text portions of this message have been removed]

To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

RE: [xl7] Tap Combo's

2003-03-31 by erik_magrini@Baxter.com

Let me see what I can do....  The template isn't actually mine, it's the 
printers, but I think I snagged a copy on my way out.

rEalm





"Andre Lewis" <andrel@...>
03/31/2003 02:00 PM
Please respond to xl7

 
        To:     xl7@yahoogroups.com
        cc:

Show quoted textHide quoted text

        Subject:        RE: [xl7] Tap Combo's


You still have the silkscreen template for the XL7 right?  Could you take 
an
overhead picture of it scanned at a higher resolution and post it?  That 
way we
could get it scaled and use that for the  base for the etching.  Either 
that or
one of the pictures of your case off (no knobs or anything) :)

Andre

-----Original Message-----
From: erik_magrini@... [mailto:erik_magrini@...]
Sent: Monday, March 31, 2003 11:41 AM
To: xl7@yahoogroups.com
Subject: RE: [xl7] Tap Combo's


Definitely do able.  You could even take it to a glass store and get it
etched into a sheet of 1/16th plexiglass if you wanted something a little
more durable and nicer looking than cardboard.  As long as you give them a
template, it's not too expensive to do this.  I had something similar done
back when I used to compete in car audio contests, it was cheaper than I
thought it would be.

rEalm



Or we could make a thin cardboard cuttout to drop over the whole thing,
word
template style.




[Non-text portions of this message have been removed]



To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/







To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 







[Non-text portions of this message have been removed]

RE: [xl7] Tap Combo's

2003-03-31 by Andre Lewis

You still have the silkscreen template for the XL7 right?  Could you take an
overhead picture of it scanned at a higher resolution and post it?  That way we
could get it scaled and use that for the  base for the etching.  Either that or
one of the pictures of your case off (no knobs or anything) :)

Andre

Show quoted textHide quoted text

-----Original Message-----
From: erik_magrini@... [mailto:erik_magrini@...]
Sent: Monday, March 31, 2003 11:41 AM
To: xl7@yahoogroups.com
Subject: RE: [xl7] Tap Combo's

Definitely do able.  You could even take it to a glass store and get it
etched into a sheet of 1/16th plexiglass if you wanted something a little
more durable and nicer looking than cardboard.  As long as you give them a
template, it's not too expensive to do this.  I had something similar done
back when I used to compete in car audio contests, it was cheaper than I
thought it would be.

rEalm

Or we could make a thin cardboard cuttout to drop over the whole thing,
word
template style.

[Non-text portions of this message have been removed]

To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Re: Tap Combo's

2003-03-31 by mikexl7

YA BABY!

That is a wicked idea!  Im on it.  Maby I will go all out and 
laminate it too :P

LOL

--- In xl7@yahoogroups.com, "Andre Lewis" <andrel@s...> wrote:
> Or we could make a thin cardboard cuttout to drop over the whole 
thing, word
> template style.
> 
> Andre
> 
> -----Original Message-----
> From: erik_magrini@B... [mailto:erik_magrini@B...]
> Sent: Monday, March 31, 2003 11:22 AM
> To: xl7@yahoogroups.com
> Subject: [xl7] Tap Combo's
> 
> 
> Ummm... yeah... one step ahead of you... where we going again?  :)
> 
> Actually I don't think the new Tap combo's are that hard to 
remember in
> use, so I probably won't be making any stickers to put on my box.
> Interesting idea for PX-7 though, they should silkscreen those in
> different colors or something on the panel. (hint hint Emu).
> 
> rEalm
> 
> 
> 
> 
> I noticed that there's a lot of additinal short-cuts in V2.0 - I 
think it
> would be a good idea to print out some stickers to go under 
the "tap'd"
> keys
> so I know what the hell's going on...
> 
> I'm sure ReAlm is one step ahead of us...
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> To unsubscribe from this group, send an email to:
> xl7-unsubscribe@yahoogroups.com
> 
> 
> 
> Your use of Yahoo! Groups is subject to 
http://docs.yahoo.com/info/terms/