Emu XL-7 & MP-7 User's Group

Hi.  I'm using LAMP 5.3 w/ Mac OS 9.2.2.....I'm using logic as a 
main Sequencer and XL-7 as a sound module and a controller 
but I can not set up XL-7 as a controller like I want....I want to set 
up XL-7's 16 knobs to control Logic Mixer Fader 1-16 etc.....then I 
switch to another multi setup then XL-7 now controll Logic 
Mixer's Pan 1-16 etc......But right now,  any one of 16 knobs 
control just 1 channel whatever selected in Logic Mixer.......I think 
it can be done....I just don't know how......Will you guys please 
help me out?  Any Logic Users?

I don't know Logic, but I do know a lot of MIDI gear has an option to 
route any incoming MIDI channel to the particular channel you are 
working on. Poke around in your Logic options and see if there is an 
option similar to the 'feature' I just described.

Hope that helps.

Carter


--- In xl7@y..., "betek070167" <betek2k@x> wrote:
> Hi.  I'm using LAMP 5.3 w/ Mac OS 9.2.2.....I'm using logic as a 
> main Sequencer and XL-7 as a sound module and a controller 
> but I can not set up XL-7 as a controller like I want....I want to 
set 
> up XL-7's 16 knobs to control Logic Mixer Fader 1-16 etc.....then I 
> switch to another multi setup then XL-7 now controll Logic 
> Mixer's Pan 1-16 etc......But right now,  any one of 16 knobs 
> control just 1 channel whatever selected in Logic Mixer.......I 
think 
> it can be done....I just don't know how......Will you guys please 
> help me out?  Any Logic Users?

--- betek070167 <betek2k@...> wrote: <edited>
> I want to set up XL-7's 16 knobs to control Logic Mixer Fader 1-16
> then I switch to another multi setup then control Mixer's Pan 1-16

Programmable knob mode was made for you.  In the PROGRAMMABLE KNOBS
screen (8th in the Controllers menu) set each knob to be Ctrl:7,
Ch:<equal to the knob> and ext.  Save that multisetup.  Then edit all
the "Ctrl:" to 10.  Save that multi.  Then, simply flick the knob
selector to "PROGRAM" and dial away!

This is of course presuming that logic takes controller 7 & 10 (vol &
pan) on a per channel basis to control its fader & pan.  If not, simply
subsitute the correct channel and controller in the PROGRAMMABLE KNOBS
screen...

-Aaron

__________________________________________________
Do you Yahoo!?
HotJobs - Search new jobs daily now
http://hotjobs.yahoo.com/