Yahoo Groups archive
Thread
2002-10-31 by erik_magrini@Baxter.com
Tried your suggestion about holding down ENTER while scrolling the Preset ROM banks in order to keep the Preset Number from going to 000:0. While it didn't work as expect (holding down ENTER scrolls the banks, not the ROMs), this will certainly still do what I need. Thanx for the tip! rEalm [Non-text portions of this message have been removed]
2002-10-31 by Nick Rothwell
> While > it didn't work as expect (holding down ENTER scrolls the banks, not the > ROMs), this will certainly still do what I need. Thanx for the tip! It probably cycles through bank select locations (MSB = ROM, LSB = bank within ROM). -- nick rothwell -- composition, systems, performance -- http://www.cassiel.com
2002-10-31 by erik_magrini@Baxter.com
Yep, cycles through all banks, but at least the Preset number doesn't
change, which was what I was after.
rEalm
"Nick Rothwell" <nick@...>
10/31/02 07:36 AM
Please respond to xl7
To: xl7@yahoogroups.com
cc: Subject: Re: [xl7] Thanx Nick > While > it didn't work as expect (holding down ENTER scrolls the banks, not the > ROMs), this will certainly still do what I need. Thanx for the tip! It probably cycles through bank select locations (MSB = ROM, LSB = bank within ROM). -- nick rothwell -- composition, systems, performance -- http://www.cassiel.com To unsubscribe from this group, send an email to: xl7-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ [Non-text portions of this message have been removed]