Emu XL-7 & MP-7 User's Group

How do I point cc 79 to individual layers? Is this possible?

On Feb 27, 2011 8:54 PM, "Matt" <somatt@...> wrote:

thank you!! This is awesome

On Sun, 27 Feb 2011, Matt wrote:

> How do I point cc 79 to individual layers? Is this possible?
=====================

no. but... if you're doing what i do, using at as six mono outputs, you 
can do something like this: route a preset to (eg) send2->sub1. then you 
can *pan* the layers independently and route them to different outboard 
fx. that would give you a preset with layers divided between two outputs.

of course you can also use the main stereo outputs with onboard effects 
and then use the sub outs as four mono sends with outboard fx... that's 
just one way to slice-n-dice it. there's a lot of flexibility with the 
outputs.

bear in mind that "pan" is a summing node: "All the modulation inputs on 
XL-7 are summing nodes. This means that you can connect as many modulation 
sources as you want to an input (such as Pitch or AmpVol). Modulation 
sources are simply added algebraically -- connecting two knobs one set to 
-100 and the other set to +100 yields a net value of zero."


-- 
         ...atom

  ________________________
  http://atom.smasher.org/
  762A 3B98 A3C3 96C9 C6B7 582A B88D 52E4 D9F5 7808
  -------------------------------------------------

 	Quidquid latine dictum sit, altum viditur.
 	(Whatever is said in Latin sounds profound.)

After years of inactivity, my EX-800 came out of mothballs and I replaced the long-dead battery. Inspired by success, I searched for mods which I had discovered at a few years ago and re-found the Moog Slayer mod (and others). (I thought your name sounded familiar--I just didn't remember from where.)
Steve