Yahoo Groups archive

Emu XL-7 & MP-7 User's Group

Index last updated: 2026-03-31 23:44 UTC

Thread

Vertical stand

Vertical stand

2002-03-06 by just john

I've found that my most comfortable way to use a controller with the XL-7
is to stand the XL-7 on its front edge on the counter to my right, and to
have the controller (small keyboard or handsonics) in my lap.

The XL-7 has never fallen over, but I'd feel even more comfortable with a
brace or holder of some sort.  For another device, I use a cookbook holder,
but this is heavier.  Anybody have a suggestion?
---
* Radio Free Entropy:  http://just-john.com/cn/rfe.shtml *

RE: [xl7] Vertical stand

2002-03-06 by Andre Lewis

get the rack ears and a table rack mount (Angled)...
Show quoted textHide quoted text
-----Original Message-----
From: just john [mailto:justjohn@...]
Sent: Tuesday, March 05, 2002 6:39 PM
To: xl7@yahoogroups.com
Subject: [xl7] Vertical stand


I've found that my most comfortable way to use a controller with the XL-7
is to stand the XL-7 on its front edge on the counter to my right, and to
have the controller (small keyboard or handsonics) in my lap.

The XL-7 has never fallen over, but I'd feel even more comfortable with a
brace or holder of some sort.  For another device, I use a cookbook holder,
but this is heavier.  Anybody have a suggestion?
---
* Radio Free Entropy:  http://just-john.com/cn/rfe.shtml *


To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Re: [xl7] Vertical stand

2002-03-06 by erik_magrini@Baxter.com

What about one of those stands for things like Alesis ADAT BRC controllers 
(probably pretty cheap right now)?  I think Mackie makes a rolling stand 
for their smaller mixers too, that might work.

rEalm





just john <justjohn@...>
03/05/02 08:38 PM
Please respond to xl7

 
        To:     xl7@yahoogroups.com
        cc:
Show quoted textHide quoted text
        Subject:        [xl7] Vertical stand


I've found that my most comfortable way to use a controller with the XL-7
is to stand the XL-7 on its front edge on the counter to my right, and to
have the controller (small keyboard or handsonics) in my lap.

The XL-7 has never fallen over, but I'd feel even more comfortable with a
brace or holder of some sort.  For another device, I use a cookbook 
holder,
but this is heavier.  Anybody have a suggestion?
---
* Radio Free Entropy:  http://just-john.com/cn/rfe.shtml *


To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

RE: [xl7] Vertical stand

2002-03-06 by just john

That renders using the unit in my OTHER favored mode -- in my lap when I'm
not using a controller -- undoable without a lot of reconfiguring.



>get the rack ears and a table rack mount (Angled)...
>
>-----Original Message-----
>From: just john [mailto:justjohn@...]
>Sent: Tuesday, March 05, 2002 6:39 PM
>To: xl7@yahoogroups.com
>Subject: [xl7] Vertical stand
>
>
>I've found that my most comfortable way to use a controller with the XL-7
>is to stand the XL-7 on its front edge on the counter to my right, and to
>have the controller (small keyboard or handsonics) in my lap.
>
>The XL-7 has never fallen over, but I'd feel even more comfortable with a
>brace or holder of some sort.  For another device, I use a cookbook holder,
>but this is heavier.  Anybody have a suggestion?
>---
>* Radio Free Entropy:  http://just-john.com/cn/rfe.shtml *
>
>
>To unsubscribe from this group, send an email to:
>xl7-unsubscribe@yahoogroups.com
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
>To unsubscribe from this group, send an email to:
>xl7-unsubscribe@yahoogroups.com
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

---
* Radio Free Entropy:  http://just-john.com/cn/rfe.shtml *

RE: [xl7] Vertical stand

2002-03-06 by Andre Lewis

No-one said you had to bolt it in, it would hold it fairly well just for tapping
pads, pushing buttons etc.
Show quoted textHide quoted text
-----Original Message-----
From: just john [mailto:justjohn@...]
Sent: Wednesday, March 06, 2002 12:37 PM
To: xl7@yahoogroups.com
Subject: RE: [xl7] Vertical stand


That renders using the unit in my OTHER favored mode -- in my lap when I'm
not using a controller -- undoable without a lot of reconfiguring.



>get the rack ears and a table rack mount (Angled)...
>
>-----Original Message-----
>From: just john [mailto:justjohn@...]
>Sent: Tuesday, March 05, 2002 6:39 PM
>To: xl7@yahoogroups.com
>Subject: [xl7] Vertical stand
>
>
>I've found that my most comfortable way to use a controller with the XL-7
>is to stand the XL-7 on its front edge on the counter to my right, and to
>have the controller (small keyboard or handsonics) in my lap.
>
>The XL-7 has never fallen over, but I'd feel even more comfortable with a
>brace or holder of some sort.  For another device, I use a cookbook holder,
>but this is heavier.  Anybody have a suggestion?
>---
>* Radio Free Entropy:  http://just-john.com/cn/rfe.shtml *
>
>
>To unsubscribe from this group, send an email to:
>xl7-unsubscribe@yahoogroups.com
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
>To unsubscribe from this group, send an email to:
>xl7-unsubscribe@yahoogroups.com
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

---
* Radio Free Entropy:  http://just-john.com/cn/rfe.shtml *


To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Re: [xl7] Vertical stand

2002-03-07 by just john

>What about one of those stands for things like Alesis ADAT BRC controllers
>(probably pretty cheap right now)?  I think Mackie makes a rolling stand
>for their smaller mixers too, that might work.
>
>rEalm


My Mackie mixer was what I was using the cookbook stand for, before I got a
rack for it.  (And I keep forgetting to bug Mackie with my notion for
asymmetrical rack ears for their narrower mixers.  Then one side would have
more room for Post-it notes.)
---
* Radio Free Entropy:  http://just-john.com/cn/rfe.shtml *

RE: [xl7] Vertical stand

2002-03-07 by Andre Lewis

Sounds like another awesome product!! Keep em coming!
Show quoted textHide quoted text
-----Original Message-----
From: just john [mailto:justjohn@...]
Sent: Thursday, March 07, 2002 1:08 PM
To: xl7@yahoogroups.com
Subject: Re: [xl7] Vertical stand



>What about one of those stands for things like Alesis ADAT BRC controllers
>(probably pretty cheap right now)?  I think Mackie makes a rolling stand
>for their smaller mixers too, that might work.
>
>rEalm


My Mackie mixer was what I was using the cookbook stand for, before I got a
rack for it.  (And I keep forgetting to bug Mackie with my notion for
asymmetrical rack ears for their narrower mixers.  Then one side would have
more room for Post-it notes.)
---
* Radio Free Entropy:  http://just-john.com/cn/rfe.shtml *


To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/