Emu XL-7 & MP-7 User's Group

Why, when in pattern mode, i decide that channel 04A should be assigned to EXT, it reverses to INT every time i turn the machine off and on again ?

I've tried saving the pattern and saving the multi, and it always goes back to INT.

HELP !

Jose
........
Vendelo todo, sin costo en www.vendetta.cl !
........

[Non-text portions of this message have been removed]

Oh, thanks !

(Why doesn't that appear in the manual ??? Aren't program change messages
data too ??? And why should i have data for a pattern to be created ???)

Jose

........
Vendelo todo, sin costo en www.vendetta.cl !
........
----- Original Message ----- 

From: "Aaron Eppolito" <synthesis77@...>
To: <xl7@yahoogroups.com>
Sent: Friday, May 20, 2005 3:27 PM
Subject: Re: [xl7] Damn XL !!


> You must record data on a track for it to save settings.  Try inserting
> a innocuous message at tick 0, like pedal up or something.
>
> -Aaron
>
> --- Jos\ufffd S\ufffdez <taliesin@...> wrote:
> > Why, when in pattern mode, i decide that channel 04A should be
> > assigned to EXT, it reverses to INT every time i turn the machine off
> > and on again ?
> >
> > I've tried saving the pattern and saving the multi, and it always
> > goes back to INT.
> >
> > HELP !
> >
> > Jose
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

This will happen when there is no data on that track.  You can put a 
CC in there (volume, for example) as a place holder. Then save the 
pattern.

I created a template for my setup (P2500) with external track 
assignments and stored it at 000^0.

When you save a pattern, tracks without data lose the channel 
assignment settings.

--Steve 


--- In xl7@yahoogroups.com, José Sáez <taliesin@t...> wrote:
> Why, when in pattern mode, i decide that channel 04A should e be 
assigned to EXT, it reverses to INT every time i turn the machine 
off and on again ?
> 
> I've tried saving the pattern and saving the multi, and it always 
goes back to INT.

> 
> HELP !
> 
> Jose
> ........
> Vendelo todo, sin costo en www.vendetta.cl !
> ........
> 
> [Non-text portions of this message have been removed]

You must record data on a track for it to save settings.  Try inserting
a innocuous message at tick 0, like pedal up or something.

-Aaron

--- Jos\ufffd S\ufffdez <taliesin@...> wrote:
> Why, when in pattern mode, i decide that channel 04A should be
> assigned to EXT, it reverses to INT every time i turn the machine off
> and on again ?
> 
> I've tried saving the pattern and saving the multi, and it always
> goes back to INT.
> 
> HELP !
> 
> Jose

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com