Yahoo Groups archive
Thread
2004-02-04 by MLEW
Has anyone had any problems with their LED covers coming off? I'm talking about the clear bumps next to the pots that light up. The leds light up still but I don't have the bumps anymore, just a hole. This has happened to about five of the LED covers. I noticed a rattling in my unit first. When I opened the unit, I found the LED covers rolling around.
2004-02-05 by erik_magrini@Baxter.com
The LED covers aren't glued on or anything, so I could see this happening.
They're only sandwiched between one of the cicuit boards and the outer
housing (how DO they do that anyway). The first time I totally
disassembled my XL-7, they all fell on the floor (big DOH!). When I
reassembled mine, I used a dab of hot glue on each one to prevent this
from happening again.
rEalm
MLEW <mlew@...>
02/04/2004 12:54 PM
Please respond to xl7
To: xl7@yahoogroups.com
cc: Subject: [xl7] Hardware - LED covers came loose Has anyone had any problems with their LED covers coming off? I'm talking about the clear bumps next to the pots that light up. The leds light up still but I don't have the bumps anymore, just a hole. This has happened to about five of the LED covers. I noticed a rattling in my unit first. When I opened the unit, I found the LED covers rolling around. Yahoo! Groups Links The information transmitted is intended only for the person(s)or entity to which it is addressed and may contain confidential and/or legally privileged material. Delivery of this message to any person other than the intended recipient(s) is not intended in any way to waive privilege or confidentiality. Any review, retransmission, dissemination or other use of , or taking of any action in reliance upon, this information by entities other than the intended recipient is prohibited. If you receive this in error, please contact the sender and delete the material from any computer. For Translation: http://www.baxter.com/email_disclaimer [Non-text portions of this message have been removed]