Emu XL-7 & MP-7 User's Group

Can anyone explain why the patchcords on the world expidition ROM are 
not compliant to the xx7 knobs like they are on the MP7 pure phatt 
ROM. I presume its because the W.E ROM origionates from a p2k module 
with only 4 realtime controller knobs but this doesn´t explain why the 
pure phatt has its cords cofigured to 16 knobs. Didn´t the pure phatt 
also come from the mo´phatt with only 4 controllers?
Q.2 Why isn´t it posible to copy cords for all layers (LA->LA) from 
one preset to another? V. time consuming :(
thx
:p

--- In xl7@yahoogroups.com, "phest2k" <tuttle@l...> wrote:
> Q.2 Why isn´t it posible to copy cords for all layers (LA->LA) from 
> one preset to another? V. time consuming :(
> thx
> :p

The sysex manual lists copy utilities.  The copy preset layer 
patchcord sysex allows for LA as a destination. but you can only have 
one Layer as a source.

You might be able to use a set of 4 sysex commands to do L1->L1 . . . 
L4->L4 in one motion.  However, I am not sure if this solution would 
work for you.  It would take more time to write the commands than to 
do it by hand.

on 1/22/04 3:20 PM, steve_the_composer wrote:

> You might be able to use a set of 4 sysex commands
> to do L1->L1 . . . L4->L4 in one motion.  However,
> I am not sure if this solution would work for you.
> It would take more time to write the commands than
> to do it by hand.

the first time anyway! ;)

programmed into a buttonpress on, say, a Peavey
PC1600x, it might be quite handy!


cheers,
aeon

--- In xl7@yahoogroups.com, aeon <aeonlux@c...> wrote:
> the first time anyway! ;)
> 
> programmed into a buttonpress on, say, a Peavey
> PC1600x, it might be quite handy!

The PC1600x may be handy; never had one.  But for this task, I'd 
guess it wouldn't save time.  Each sysex command specifies source 
preset, source layer, destination preset, destination layer, and 
Source ROM.

--Steve

on 1/22/04 3:58 PM, steve_the_composer wrote:

> --- In xl7@yahoogroups.com, aeon <aeonlux@c...> wrote:
>> the first time anyway! ;)
>> 
>> programmed into a buttonpress on, say, a Peavey
>> PC1600x, it might be quite handy!
> 
> The PC1600x may be handy; never had one.  But for this task, I'd
> guess it wouldn't save time.  Each sysex command specifies source
> preset, source layer, destination preset, destination layer, and
> Source ROM.

oops, gotya...no need then.


cheers,
aeon

Hi,

Can someone re-upload or email me the MIDI2Arp app that kevinj_j did back in
September?

I can't seem to dowlaod it from the files section...

Regards,

Stu

Hi Stu.
Its still in the files section here on the left.
<<<<------

Great App.For anyone new here, check it out!

:P


 --- In xl7@yahoogroups.com, "Stu" <routerman@z...> wrote:
> Hi,
> 
> Can someone re-upload or email me the MIDI2Arp app that kevinj_j did 
back in

> September?
> 
> I can't seem to dowlaod it from the files section...
> 
> Regards,
> 
> Stu

--- In xl7@yahoogroups.com, "phest2k" <tuttle@l...> wrote:
> Can anyone explain why the patchcords on the world expidition ROM
> are not compliant to the xx7 knobs like they are on the MP7 pure
> phatt ROM. 

Just wondering if you ever solved this one.  (I assume you checked 
controller assignments/settings [patchord/preset], so I didn't 
mention it.  If you take a look at the manuals for different gear, 
they show different default controller assignment/settings.)

--Steve

"steve_the_composer" <smw-mail@p...> wrote:
"Just wondering if you ever solved this one"

It´s not too much of a problem,really. It´s just that I´m used to the 
phatt rom presets where the patches are fairly consistent to the 
labels on the xx7 chasis, for example :
midi I is patched to the velocity amp
midi L is patched to Lfo2 rate -etc,etc,etc
 - it does what it says on the box.....
however, the world rom presets have:
the midi H patched to lfo2 rate (not amp release)
no midi contr. is patched to the velocity amp - etc
It´s just really inconsistent and takes ages to reconfigure.
Seems like the world rom was made for a different machine and I was 
just curious which one.

:paul
ps: I´m really struggling to get my head around remote sysex commands.
Could you recommend some literature.I´d love to understand it but its 
so tricky- my achilles heal .





 "steve_the_composer" <smw-mail@p...> wrote:

> --- In xl7@yahoogroups.com, "phest2k" <tuttle@l...> wrote:
> > Can anyone explain why the patchcords on the world expidition ROM
> > are not compliant to the xx7 knobs like they are on the MP7 pure
> > phatt ROM. 
> 
> Just wondering if you ever solved this one.  (I assume you checked 
> controller assignments/settings [patchord/preset], so I didn't 
> mention it.  If you take a look at the manuals for different gear, 
> they show different default controller assignment/settings.)
> 
> --Steve

The World ROM (and every other rom except XL-7, MP-7, PX-7 and POP) is
laid out for the Proteus 2000 knob layout.  It's as follows:

A: Fc,  B: Q,  C: Shape (usually Filt env to Fc),  D: Image
E: Attack,  F: Decay/Rls,  G: Movement (usu. panning),  H: Rate (of G)
I: Velocity->Amp,  J: Vel->Fc,  K: FX A,  L: FX B

There's some variation on these (like the B3) but in general, they
follow this layout.

-Aaron

--- phest2k <tuttle@...> wrote:
> "steve_the_composer" <smw-mail@p...> wrote:
> "Just wondering if you ever solved this one"
> 
> It\ufffds not too much of a problem,really. It\ufffds just that I\ufffdm used to the
> phatt rom presets where the patches are fairly consistent to the 
> labels on the xx7 chasis, for example :


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!
http://webhosting.yahoo.com/ps/sb/

Thx Aaron/Steve,
Just wanted to make sure it was installed correctly.
I´ll have to free up some more user locations and do some patchwork 
then :/
BTW - Some excellant sounds on this rom - well recommended.

:Paul



--- In xl7@yahoogroups.com, Aaron Eppolito <synthesis77@y...> wrote:
> The World ROM (and every other rom except XL-7, MP-7, PX-7 and POP) 
is
> laid out for the Proteus 2000 knob layout.  It's as follows:
> 
> A: Fc,  B: Q,  C: Shape (usually Filt env to Fc),  D: Image
> E: Attack,  F: Decay/Rls,  G: Movement (usu. panning),  H: Rate (of 
G)
> I: Velocity->Amp,  J: Vel->Fc,  K: FX A,  L: FX B
> 
> There's some variation on these (like the B3) but in general, they
> follow this layout.
> 
> -Aaron
> 
> --- phest2k <tuttle@l...> wrote:
> > "steve_the_composer" <smw-mail@p...> wrote:
> > "Just wondering if you ever solved this one"
> > 
> > It´s not too much of a problem,really. It´s just that I´m used to 
the

> > phatt rom presets where the patches are fairly consistent to the 
> > labels on the xx7 chasis, for example :
> 
> 
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free web site building tool. Try it!
> http://webhosting.yahoo.com/ps/sb/

Aaron, thanks for the details!!  I have taken the liberty of:
(1) renaming the thread for easy access via search engine (I hope!!!)
(2) reformatting your list vertically
--Steve

--- In xl7@yahoogroups.com, Aaron Eppolito <synthesis77@y...> wrote:
> The World ROM (and every other rom except XL-7, MP-7, PX-7 and POP
> is laid out for the Proteus 2000 knob layout.  It's as follows:

 A: Fc  
 B: Q
 C: Shape (usually Filt env to Fc)
 D: Image
 E: Attack
 F: Decay/Rls
 G: Movement (usu. panning)
 H: Rate (of G)
 I: Velocity->Amp
 J: Vel->Fc
 K: FX A
 L: FX B

> 
> There's some variation on these (like the B3) but in general, they
> follow this layout.
> 
> -Aaron

Great idea!

rEalm




Q.2 Why isn´t it posible to copy cords for all layers (LA->LA) from 
one preset to another? V. time consuming :(
thx
:p


 

Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/xl7/

To unsubscribe from this group, send an email to:
 xl7-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/ 







The information transmitted is intended only for the person(s)or entity 
to which it is addressed and may contain confidential and/or legally 
privileged material. Delivery of this message to any person other than 
the intended recipient(s) is not intended in any way to waive privilege 
or confidentiality. Any review, retransmission, dissemination or other 
use of, or taking of any action in reliance upon, this information by 
entities other than the intended recipient is prohibited. If you 
receive this in error, please contact the sender and delete the 
material from any computer.

For Translation:

http://www.baxter.com/email_disclaimer


[Non-text portions of this message have been removed]

What's "Image", panning?

rEalm





"Aaron Eppolito" <synthesis77@...m>
01/23/2004 09:37 AM
Please respond to xl7

 
        To:     xl7@yahoogroups.com
        cc: 

        Subject:        Re: [xl7] Re: world rom / copy cords


The World ROM (and every other rom except XL-7, MP-7, PX-7 and POP) is
laid out for the Proteus 2000 knob layout.  It's as follows:

A: Fc,  B: Q,  C: Shape (usually Filt env to Fc),  D: Image
E: Attack,  F: Decay/Rls,  G: Movement (usu. panning),  H: Rate (of G)
I: Velocity->Amp,  J: Vel->Fc,  K: FX A,  L: FX B

There's some variation on these (like the B3) but in general, they
follow this layout.

-Aaron

--- phest2k <tuttle@linuxmail.org> wrote:
> "steve_the_composer" <smw-mail@p...> wrote:
> "Just wondering if you ever solved this one"
> 
> It´s not too much of a problem,really. It´s just that I´m used to the
> phatt rom presets where the patches are fairly consistent to the 
> labels on the xx7 chasis, for example :


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!
http://webhosting.yahoo.com/ps/sb/

 


Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/xl7/

To unsubscribe from this group, send an email to:
 xl7-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/ 







The information transmitted is intended only for the person(s)or entity 
to which it is addressed and may contain confidential and/or legally 
privileged material. Delivery of this message to any person other than 
the intended recipient(s) is not intended in any way to waive privilege 
or confidentiality. Any review, retransmission, dissemination or other 
use of, or taking of any action in reliance upon, this information by 
entities other than the intended recipient is prohibited. If you 
receive this in error, please contact the sender and delete the 
material from any computer.

For Translation:

http://www.baxter.com/email_disclaimer


[Non-text portions of this message have been removed]