Emu XL-7 & MP-7 User's Group

i think realm has the cool custom paint job on his. saw a picture 
here i think. i walked by the command stations for a year and a half 
be fore i checked one out, because of the awful colors.(imo) finally 
got a p2500, but took it back and got xl7(didnt know they were all 
the same except diff. roms).loved the proteus basses subbed out thru 
distortion in my sequences and found it was cheaper to buy xl7 and 
buy a rom from emu and get protozoa free, than keep 2500. ill get to 
my question- how are the buttons holding up for you guys who have 
older machines and sequence alot? and how can i get a custom paint 
job on mine?

ill get to my question- how are the buttons holding up for you guys who 
have older machines and sequence alot? 

>>>I worry about that too, but so far mine are still working perfectly, 
after 3 years of heavy handed editing. <<<

and how can i get a custom paint job on mine?

>>Take it apart, get some paint on it, put it back together :)  The hard 
part is getting the silkscreening done, though I have a hook up for that. 
Unfortunately, it's still pricey, roughly $100 or so. <<<

rEalm



To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 






------------------------------------------------------------------------------
The information transmitted is intended only for the person(s)or entity to
which it is addressed and may contain confidential and/or legally privileged
material.  Delivery of this message to any person other than the intended
recipient(s) is not intended in any way to waive privilege or confidentiality.
Any review, retransmission, dissemination or other use of , or taking of any
action in reliance upon, this information by entities other than the intended
recipient is prohibited.  If you receive this in error, please contact the
sender and delete the material from any computer.

For Translation:

http://www.baxter.com/email_disclaimer
==============================================================================


[Non-text portions of this message have been removed]

OK ... so where can I get the silkcreening done?
________________
>Take it apart, get some paint on it, put it back together :)  The 
hard 
> part is getting the silkscreening done, though I have a hook up for 
that. 
> Unfortunately, it's still pricey, roughly $100 or so. <<<
> 
> rEalm

I'll have to look up the name when I get home, I'll be back on Monday 
though.

rEalm





allenscheer2003 <dansgold@...>
12/04/2003 02:13 PM
Please respond to xl7

 
        To:     xl7@yahoogroups.com
        cc: 
        Subject:        [xl7] Re: my xl7 is ugly


OK ... so where can I get the silkcreening done?
________________
>Take it apart, get some paint on it, put it back together :)  The 
hard 
> part is getting the silkscreening done, though I have a hook up for 
that. 
> Unfortunately, it's still pricey, roughly $100 or so. <<<
> 
> rEalm




To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 






------------------------------------------------------------------------------
The information transmitted is intended only for the person(s)or entity to
which it is addressed and may contain confidential and/or legally privileged
material.  Delivery of this message to any person other than the intended
recipient(s) is not intended in any way to waive privilege or confidentiality.
Any review, retransmission, dissemination or other use of , or taking of any
action in reliance upon, this information by entities other than the intended
recipient is prohibited.  If you receive this in error, please contact the
sender and delete the material from any computer.

For Translation:

http://www.baxter.com/email_disclaimer
==============================================================================


[Non-text portions of this message have been removed]

--- In xl7@yahoogroups.com, erik_magrini@B... wrote:
> ill get to my question- how are the buttons holding up for you guys 
who 
> have older machines and sequence alot? 
> 
> >>>I worry about that too, but so far mine are still working 
perfectly, 
> after 3 years of heavy handed editing. <<<

My "Track +" button has gone fiddly - it doesn't always register a 
click. I'm not too worried about it, since I'm still well within the 
one-year warranty and it's not a crucial performance button.

I'm very jealous of your paint job so I'm going to ignore the rest of 
the msg. But if Emu does a sampling Command Station I hope it's 
either deep blue or charcoal-almost-black gray.

yours is too!!

great 

i thought mine was the only one ;)

--- In xl7@yahoogroups.com, "emuxl7" <machfox@h...> wrote:
>  i think realm has the cool custom paint job on his. saw a picture 
> here i think. i walked by the command stations for a year and a 
half 
> be fore i checked one out, because of the awful colors.(imo) 
finally 
> got a p2500, but took it back and got xl7(didnt know they were all 
> the same except diff. roms).loved the proteus basses subbed out 
thru 
> distortion in my sequences and found it was cheaper to buy xl7 and 
> buy a rom from emu and get protozoa free, than keep 2500. ill get 
to 
> my question- how are the buttons holding up for you guys who have 
> older machines and sequence alot? and how can i get a custom paint 
> job on mine?