Emu XL-7 & MP-7 User's Group

That was a pretty deep explanation, many thanx rEalm!  It works out 
fantastic.  The only other concern I have is when I set a particular 
channel to have an FX send to main and at the same time have 
the "RECHANNELIZE MIDI IN to Chan:" set to "always" and I exit the 
MIDI edit and scroll through my tracks I get pauses and glitches 
switching inbetween tracks.  Setting Rechann...chan: to "off" solves 
the issue. Trying to see the routing logical reasoning... hmm..



--- In xl7@y..., erik_magrini@B... wrote:
> It is all in the Global menu, and if you're using Master Effects 
then the 
> effects settings (types and sends) are saved seperately for each 
Pattern 
> too (although I couldn't find a mention of that in the manual).  
If you 
> only want a few tracks to have FXA effects, here's how:
> 
> First, you need to set up one of the 4 effects buses so that the 
FXA send 
> amount is 0%.  These settings are all under the global menu BTW.  
That 
> will make sure that anything sent to that bus remains "dry".  
Typically I 
> find it easiest to set up my buses so taht each higher number 
introduces 
> more effect.  It's just easier to remember that way for me.  So my 
buses 
> might look like this:
> 
> Bus 1: FXA=0    FXB=0
> Bus 2: FXA=7   FXB= 5
> Bus 3: FXA=15  FXB=10
> Bus 4: FXA=30 FXB=20 
> 
> Now I know that if a track need more of an effect, I can just go 
to the 
> bus assign page and raise to it to a higher numbered bus.  The 
opposite 
> applies if you need less of an effect.  If you want a track to not 
have 
> any effect at all, just set it to Bus 1.  Hope this helps, let me 
know if 
> need to clarify more!
> 
> rEalm
> 
> 
> 
> Sorry to take up the board- is there a way to send FXA using Send1-
>Main 
> feature to only certain tracks and keep all the other tracks clean 
from 
> FX?  It seems like it's all global.