Emu XL-7 & MP-7 User's Group

It is all in the Global menu, and if you're using Master Effects then the 
effects settings (types and sends) are saved seperately for each Pattern 
too (although I couldn't find a mention of that in the manual).  If you 
only want a few tracks to have FXA effects, here's how:

First, you need to set up one of the 4 effects buses so that the FXA send 
amount is 0%.  These settings are all under the global menu BTW.  That 
will make sure that anything sent to that bus remains "dry".  Typically I 
find it easiest to set up my buses so taht each higher number introduces 
more effect.  It's just easier to remember that way for me.  So my buses 
might look like this:

Bus 1: FXA=0    FXB=0
Bus 2: FXA=7   FXB= 5
Bus 3: FXA=15  FXB=10
Bus 4: FXA=30 FXB=20 

Now I know that if a track need more of an effect, I can just go to the 
bus assign page and raise to it to a higher numbered bus.  The opposite 
applies if you need less of an effect.  If you want a track to not have 
any effect at all, just set it to Bus 1.  Hope this helps, let me know if 
need to clarify more!

rEalm



Sorry to take up the board- is there a way to send FXA using Send1->Main 
feature to only certain tracks and keep all the other tracks clean from 
FX?  It seems like it's all global.