Emu XL-7 & MP-7 User's Group

--- In xl7@yahoogroups.com, Aaron Eppolito <synthesis77@y...> wrote:
> Multisetups only load into the current multi.  If you want to save
> them, you must choose save multisetup in the global menu after each
> dump.
> 
> -Aaron
> 

Slight clarification (hope I'm not saying anything wrong, misleading, 
harmful, or useless here, Aaron.  If so, see note below.):

With sysex commands, you can automate the process as follows:

1. Send multi from computer to Command Station
2. Send sysex command to save the multi to the user multi location of 
your choice.

Repeat this for as many multis as you want.

The process should be detailed in the the archives: message 9596.

http://groups.yahoo.com/group/xl7/message/9596


WARNING:  Make sure you have backups of your own multis.  If you send 
a sysex command to copy one of rEalm's multis (for example) to 
location 000 and you have a multi that you spent 6 hours creating in 
location 000, IT WILL BE WHACKED.  (Hope I'm using that word 
correctly.) The same will be true if you save the multi to location 
000 from the front panel.

PLEASE NOTE:  If there any oversights or errors, please e-mail me 
privately and I will either correct the post or remove it.  If there 
are any questions, please post here.

Thanks.

Dr. Steve