Emu XL-7 & MP-7 User's Group

Dear Sir,

Thanks for your mail

Yes  when I press a key on the xp-60 ,I can see the  MIDI in INDICATOR 
lighting up  (RED in colour) on the P2500 module.

Yes ,both are set to same  MIDI  Channel 1. Selected the factory presets.
I  have checked the midi cables and they are working with other midi 
devices .

Also I re-installed  the software E-loader 1.1,also the MTP AV USB is 
installed with the latest drivers.

I tried  upgrading the o.s (2.0) from  E-loader 1.1 ,selected the 
downloadable o.s. file 2.0 ,seected the midi device  INPUT   AND OUTPUT 
PORT,but  still the problem  on the download section  :Download  OS File 
to Target  is not highlighted.

It looks like the o.s. has been corrupted ,or has the midi controller 
gone bad.we are not sure.

(Recently I have upgraded (using o.s. loader 1.0)  the PROTEUS 2000  to 
o.s. ver 2.26, with this same setup,but I could not upgrade the P2500 
module using E-loader 1.1).


Also can we upgrade  the P2500 module using another  P2500 module.
For eg.  Transferring O.S from one  P2500 module  to  another P2500 
module using midi cables ,without using e-loader and the computer.
Pls let us know if this possible.

Again your help is needed .

Waiting for your reply ASAP

Thanks and Best Regards
for  S.U.N. Media Ventures Pvt Ltd.

Peter

------------------------------------------------------------------------


erik_magrini@... wrote:

>We checked the sound output from the P2500 module through the AUDITION 
>button  and it was playing fine without any problem.  After connecting the 
>Keyboard XP60  to the P2500 module (XP60  MIDI OUT  -  P2500 MIDI IN), and 
>while playing the  keyboard there is no sound output from the P2500 
>module. But we can get sound output from the P2500 itself  by presssing 
>the  audiotion button  only .
>
>  
>
>>>>Can you see the MIDI in indicator lighting up on the P2500 when you 
>>>>        
>>>>
>press a key on the XP60?  It should be at the top of the module's front 
>panel on the right side. <<<
>
>Why is it that we can get the sound output from  P2500 while pressing the 
>audition  button., and not from the keyboard xp60     ( MIDI out of xp60 
>keyboard  going to midi in to P2500 module).
>
>  
>
>>>>Some more things to check:
>>>>        
>>>>
>
>- Are they both set to the same MIDI channel?
>- Is there a Preset selected on the that channel? The default Preset will 
>not sound, so you need to make sure one of the factory Presets is 
>selected.
>- Is it possibly a bad midi cable? <<<
>
>Thinking that the o.s. might be the problem.We tried to upgrade the P2500 
>o.s. ver from 1.31  to  1.32 and  2.0,but no luck we could not upgrade the 
>P2500 module. We have selected the download request o.s ver 2.0 and also 
>target device selection midi in 1  and midi out 1 ,inspite of this  under 
>status : it still showing  :  waiting for download request ,No file 
>selected ,no target selected. Why is it so ,are we missing something 
>,please let us know 
>
>  
>
>>>>Wow, that's a strange one!  It sounds like you're doing everything 
>>>>        
>>>>
>correctly, my only guess is that somehow E-Loader did not install itself 
>properly?  I'm sure you're frsutrated by this, but maybe try re-installing 
>E-Loader 1.1 again?  I can't think of what else could be casuing this, 
>unless the Midi interface is having troubles and not seeing the P2500 in 
>OS receive mode.  Do you have the latest drivers installed for the MTP?<<<
>
>Your help is needed urgently. Waiting for your reply ASAP
>
>  
>
>>>>We'll do the best we can, but this is only a User's Group, and not Emu 
>>>>        
>>>>
>tech support.  :) <<<
>
>rEalm
>
>
>[Non-text portions of this message have been removed]
>
>
>
>To unsubscribe from this group, send an email to:
>xl7-unsubscribe@yahoogroups.com
>
> 
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
>
>
>
>
>  
>



[Non-text portions of this message have been removed]