Let me see what I can do.... The template isn't actually mine, it's the
printers, but I think I snagged a copy on my way out.
rEalm
"Andre Lewis" <andrel@...>
03/31/2003 02:00 PM
Please respond to xl7
To: xl7@yahoogroups.com
cc:
Subject: RE: [xl7] Tap Combo's
You still have the silkscreen template for the XL7 right? Could you take
an
overhead picture of it scanned at a higher resolution and post it? That
way we
could get it scaled and use that for the base for the etching. Either
that or
one of the pictures of your case off (no knobs or anything) :)
Andre
-----Original Message-----
From: erik_magrini@... [mailto:erik_magrini@...]
Sent: Monday, March 31, 2003 11:41 AM
To: xl7@yahoogroups.com
Subject: RE: [xl7] Tap Combo's
Definitely do able. You could even take it to a glass store and get it
etched into a sheet of 1/16th plexiglass if you wanted something a little
more durable and nicer looking than cardboard. As long as you give them a
template, it's not too expensive to do this. I had something similar done
back when I used to compete in car audio contests, it was cheaper than I
thought it would be.
rEalm
Or we could make a thin cardboard cuttout to drop over the whole thing,
word
template style.
[Non-text portions of this message have been removed]
To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
[Non-text portions of this message have been removed]Message
RE: [xl7] Tap Combo's
2003-03-31 by erik_magrini@Baxter.com