Emu XL-7 & MP-7 User's Group

Yipes.  Sounds like you may have shocked the poor thing while you were
installing the SIMM or something.  I'd recommend taking it to a service
center.  In short of that, I'd check to make sure that nothing got
dropped in the unit while installing the ROM and that you didn't bend
any pins on the socket.  Also, make sure all the ribbon cables are
connected (but I think you said you already did that).

If you can get it to boot again, I'd recommend running diagnostics on
it, but be careful, many of them blow away user data.

-Aaron

--- Kris Musard <kmusard@...> wrote:
> After many power cycles I got the machine to boot back
> up.  I was able to play my patterns and presets
> successfully.  I thought everything was OK, then I
> tried to play some patterns from cubase via MIDI and
> the LED on the MP7 went crazy.  It started scrolling
> from left to right displaying alot of strange
> characters.  I stopped the midi transmission and the
> stuff continued to scroll across the MP7 screen.  I
> powered the unit off and now I have the same problem
> again of the machine not booting and all the LEDS
> remaining lit.  Has anyone run into this problem or
> similar before?


__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com