Emu XL-7 & MP-7 User's Group

In a message dated 11/6/02 9:00:34 AM, xl7@yahoogroups.com writes:


> > Anyone ever noticed when you first power up the xx-7 the digital out
> > makes crackling noises until the unit warms up. Everything's right on
> > my end as far as setting my interface to clock to digital inputs.
> > Strange, as the xx-7 warms up the noise seem to decrease??? Anyone?
> 
> The symptoms still suggest a lack of proper clock synchronization with the
> decrease over time due to the XX7's clock drifting into proper range.  Is
> there a way you can verify?  What type of digital input are you driving?
> 

That's typical when first powering up. You'll likely hear the clocking static 
for about 5 seconds or so until the clock locks. I work with a lot of 
differing sample rates from 44.1k to 96k and whenever I first power up a 
piece or switch the master clock's rate, it takes a few seconds for 
everything to sync up.

jt burke


[Non-text portions of this message have been removed]