Emu XL-7 & MP-7 User's Group

I see what you're doing wrong. With in a pattern, there are 32 
internal MIDI channels to set your presets up in. These are labeled 
01A to 16A and 01B to 16B. All 16 of the sequencer tracks share these 
channels. If you've used channels 01A through 05A for presets used by 
track 1 and then want different presets for track 2, you should use 
06A through 11A. Does that help?

Beat Rebel


--- In xl7@y..., tokinhood@y... wrote:
> Hi,
> Can someone explain how to use the MultiChannel per Track recording 
> method?  I must have read the manual on that section 20 times and 
> still have a hard time getting the concept.  I experimented with the 
> actual assignment but everytime I switch to a new Channel on the 
same 
> track for new presets, my previous tracks (while playing my current) 
> gets overwritten with different presets.  What am I doing wrong?  I 
> set track 1 for Multi A with Destination Both and allocate Channels 
> A01-A05 for different unique presets and save, and I increase to 
> track 2 and try to assign Channels A01-A05 for another unique 
presets 
> the track 1 playing in the backgroud sounds different than what I 
had 
> wanted it.  Obviously this is not how Multichannel per Track 
> recording works and I'm very baffled.
> 
> Any advice is greatly appreciated