Wooooooo you rock! Thanks for the info man. can't wait for that patch. Just no ARP use until this patch I suppose =\ . And again thanks for your time! --- In xl7@y..., Sean Wilhelmsen <seanw@e...> wrote: > > Here's the scoop. For your setup, you'll need the feature "Local on/off > select". Currently this is not implemented in the XL-7. The Good news > is, it will be including in our next major release scheduled for mid > November. Once you have this feature, you'll need to set it to Local > off. This will shut of the keypads to the internal engine and only allow > the pads data to go out of the MIDI outs. The notes will then pass > through your sequencer and back into the XL-7 playing everything > correctly. Right now you have pad data going the internal synth and the > same exact data passing through your sequencer back to your Xl-7. It > should sound like a flange when you play standard presets, but when > playing presets with arps, cancellation will occur. > > Work around for now. When you are using the Xl-7 with a software > sequncer, use another controller (keyboard) to play/record the the Xl-7 > presets. Or, when recording unplug the MIDI in cable and reconnect when > you playback. > > sean at e-mu / ensoniq > > > b0nez6969@a... wrote: > > > > Ya you got it Aaron.. Thats what it is. But now what sucks. Is I can > > only use the keypads. I cant use my midi controller through cubase > > with it b\c when I goto use that output. It does that Midi Loop thing > > your talkin about. Would you happen to know how to fix this? And if > > anyone happens to get a few spare minutes and are willing to help > > me... I have ICQ at 6263627. I would completely appreciate any help > > of any kind reguarding this problem. So if anyone can answer this > > question for me.... With Cubase ( sequencer) , I have my XL-7 plugged > > in through a MIDIMAN 8x. I am using my output for my XL-7 on OUT3. > > With thru on to gain access to my MIDI controller. But, when I want > > to use my MIDI controller for the preset arp patters or any arp > > patterns of ANY type for my XL-7.It will not work. Neither will most > > of the touchpads. But, if I switch the OUT channel the XL-7 is on. I > > can use the arp patters with the touchpads. So my question is. Is > > there a way for me. To make it so I can use my MIDI controller using > > OUT3 for the arp patterns. Cuz the touchpads arent my thing. Has > > anyone ran into this problem? By the way. I dont have any problems > > with my other equipment. Just the ARP with the MIDI controller on the > > XL-7. Please help =) > > > > --- In xl7@y..., Aaron Eppolito <aarone+xl7@e...> wrote: > > > Sounds like a midi loop. Make sure that any gear connected to your > > XL-7 > > > (usually a computer sequencer does this) is not echoing back the > > information > > > sent by the XL-7 back into the XL-7. > > > > > > -Aaron > > > > > > b0nez6969@a... wrote: > > > > > > > Sorry everyone for taking up all this room. But i think what is > > > > happening is that MIDI notes are getting stuck when I try to use > > my > > > > arp patterns. It plays one or two notes then the MIDI light on the > > > > machine stays lit as if something is getting stuck. Yanno. IS it > > > > possible that this could be a issue? I know its not my midi gear > > b\x > > > > it works great with all my other equipment. Anyone have any > > feedback? > > > > --- In xl7@y..., b0nez6969@a... wrote: > > > > > OK. Now , I do have a sound playing from it... But it plays the > > > > note > > > > > quickly and then just breaks off into this messy soundin arp > > > > patetern > > > > > of crap. IS there something maybe wrong with my machine? > > > > > > > > > > --- In xl7@y..., b0nez6969@a... wrote: > > > > > > I got there. Thank you. But when I goto play a note..I > > recieve no > > > > > > sound? I know thats not suppose to happen. Could that be due > > to > > > > the > > > > > > patch? > > > > > > > > > > > > > > > > > > --- In xl7@y..., "M2" <mmcquay@m...> wrote: > > > > > > > What you have to do is go into the edit menu for the > > individual > > > > > > > preset, if it is a normal preset, when you get to the Arp > > > > screen, > > > > > > the > > > > > > > mode will be off. You will have to hit the cursor button to > > > > move > > > > > > to > > > > > > > the lower right level and select on, move the cursor back to > > > > the > > > > > > > lower left side of the screen and then scroll until you see > > the > > > > > > mode > > > > > > > screen. From there select pattern mode. Then move the > > cursor > > > > > back > > > > > > to > > > > > > > the lower left and keep scrolling until you get to the > > pattern > > > > > > > screen. From there you can pick any of the patterns > > > > available. > > > > > > From > > > > > > > the main screen the arp section should say A:P. > > > > > > > > > > > > > > Good Luck, > > > > > > > > > > > > > > M2 > > > > > > > > > > > > > > > > > > > > > > > > > > > > --- In xl7@y..., b0nez6969@a... wrote: > > > > > > > > I just bought my XL-7 and have gone through the manual > > about > > > > 5 > > > > > > > times > > > > > > > > now. Basically all I am trying to do is take a preset and > > use > > > > > one > > > > > > > of > > > > > > > > the arp patterns that is under the ARP menu. Everytime I > > try > > > > > all > > > > > > I > > > > > > > > get is nothing...if that. Can someone please help me > > please. > > > > I > > > > > am > > > > > > > > losing extreme patience with this. IF anyone has the time > > or > > > > > care > > > > > > > to > > > > > > > > respond it would be greatly appreciated. Thanks > > > > > > > > > > > > To unsubscribe from this group, send an email to: > > > > xl7-unsubscribe@y... > > > > > > > > > > > > > > > > Your use of Yahoo! Groups is subject to > > http://docs.yahoo.com/info/terms/ > > > > Yahoo! Groups Sponsor > > ADVERTISEMENT > > [Image] > > > > > > > > To unsubscribe from this group, send an email to: > > xl7-unsubscribe@y... > > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Message
Re: Arp
2001-10-18 by b0nez6969@aol.com