Emu XL-7 & MP-7 User's Group

rEalm,
One more thing. Try using the 7 segment display (press edit, select
Track/channel), it's really helpful when choosing B channels for the key pad
when assigning B channels to triggers.

sean at e-mu
----- Original Message -----
From: "Aaron Eppolito" <synthesis77@...>
To: <xl7@yahoogroups.com>
Sent: Tuesday, September 24, 2002 9:03 AM
Subject: Re: [xl7] Arp bug here too?


> --- erik_magrini@... wrote:
> > Ok, I think I may have run across that Arp bug
>
> Well, you already know that it's not Nick's bug (which I should
> probably confirm as a bug by the way - I checked and it is most
> certainly the case that Extension Interval gets picked up from the
> *prviously* selected preset - good catch Nick).
>
> I just did a quick test to try your thing rEalm, and I think you may be
> running into problems with rechannelization.  Make sure you set the
> channel explicitly in the Triggers menu instead of setting it to Basic
> (you probably already did that).  Also, you might want to turn
> rechannelization off because if no sequencer track is set to use the
> "B" channel you're working on, you can switch to that B channel on the
> preset screen, but the keyboard will still be on some other channel
> (specificly, the last channel selected that actually had a track
> assigned to it).
>
> So, I think what's happening is that your keypads are playing one
> channel, and the triggers are playing a different one.  Oh, note also
> that the selection or channel for the keypads in the controllers menu
> is overriden by rechannelize, so if you're using that to set channel
> with rechannelize on, it won't do anything.
>
> -Aaron
>
> __________________________________________________
> Do you Yahoo!?
> New DSL Internet Access from SBC & Yahoo!
> http://sbc.yahoo.com
>
>
> To unsubscribe from this group, send an email to:
> xl7-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>