Aaron,
Thanks for your reply. Is there a way to
record, say, midi channel 04a on track1, and then record midi channel 1a on
track 1? or do i always have to have an open track to merge
from??
----- Original Message -----From: Aaron EppolitoSent: Thursday, July 18, 2002 12:23 PMSubject: Re: [xl7] questions ...If you turn on "Rechannelize to track" you should never have to touch the basic channel on your keyboard. The XL-7 automatically reassigns channels (as well as outputs) appropriately. You will need to turn off rechannelize to record a multi-track (though not to play one back).
Oh, and by the way, you can use up to 16 channels on a track, but they must all be from the same port (MidiA or MidiB), so in your below example, 12a & 14a would work (as well as the rest of the A channels) but not 2b.
-Aaron
David Jones wrote:
Oh and also, when i record from an external keyboard, say, on channel 4, and i'm on track5 , it will record whatever i play to track 5. is there anyway to make it do this the right way (to track 4)???Also, If I want to record channels 12a, 14a, and 2b on track 1 using an external keyboard, would I need to record on tracks 12, 14, and 2 and then merge? Or is there an easier way??
>>>Yeah, your best bet would be to just record those channels seperately and then copy them all to the same track (set to Multi I believe). <<<
To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.