That sounds fun!� I'd love to cool down that Pill-poppin' Yellow glare this thing gives off.� Paint it cobalt blue or something.� I told the E-mu rep last week that color choice was a big factor in my decision between the XL and the MP.� Ultimately I took the XL because the sounds fitted my purpose better, and they didn't have an XL ROM in stock I could buy and add to an MP.� No offense if that yellow is someone's favorite color, but yeah, I'd paint the sucker Novation Blue.� Mmmmm.
peas
Shawn
http://locuna.com
Original Message:
Yeah, I know Emu DOESN'T recommend it, but is it pretty easy to get the knob board out?� Do the knobs just pull off?� I'm seriously thinking about doing a custom paint job on mine, and then having a third party re-silkscreen the lettering on.� Anyway, for those that have pulled it apart already, is it difficult to get the case by itself?
rEalm
Since you've already opened it up (otherwise I would recommend taking it
to your dealer) here's how to put it back together.� Put the front panel
face down on something that doesn't push where the knobs go (so you can
put the knob board back in without it bumping anything).� Then, one by
one, put the lightpipes in with the two prongs on the left and right
(horizontal).� Then put the board carefully back down on the lightpipes
and screw it back in.� I suppose you could put a little blob of
superglue around the top of the lightpipe ring.� Make sure they all dry
before you put the board in however.
To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.