Emu XL-7 & MP-7 User's Group

Well when I have had this happen on my MC505 it was usually as rEalm mentioned
before, the filter Q was too high and the filter sweeps peak out well above the
output threashold.  Might explain why all the songs are mixed with volume near
the middle...
Andre

-----Original Message-----
From: blueriv [mailto:blueriv@...]
Sent: Sunday, April 28, 2002 7:55 AM
To: xl7@yahoogroups.com
Subject: [xl7] Re: Pops and clicks


--- In xl7@y..., "smwither2002" <smwither2002@y...> wrote:
> I am still having pops on certain patterns that don't seem to
> correlate with anything identifiable.  I don't think it's powerline
> problems since it is of a repetitive nature and only on certain
> tracks.  Changing presets doesn't always work.  Does anyone have
any
> suggestions for minimizing these noises?

I have the same exact problem with one or two sequences I saved on my
Proteus 2500.  These pops and click happen when I use certain Presets
together, in my case using pad Preset #000, bank3 (Richness) with
almost anything else in a multi channel sequence. When I use a
different preset with the sequence, the popping goes away... I talked
to one of the E-Mu reps about it, and they suggested staying away
from solo (mono) patches when doing multi channel sequences, BUT that
particular preset I mentioned is polyphonic !   Maybe an OS upgrade
will solve this....   -Steve :-)






To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/