The 309 does not have that ability, nor does the
sirius, or polymorph. I have all three, its not the
comand stations fault, quasi just didnt find it essential enough to put that in
their op sys. I think it sucks, but what can you do.
If your not living on the edge, your taking up to
much room.
Gill & ^the^ UGRR
----- Original Message -----From: Aaron EppolitoSent: Monday, April 22, 2002 11:33 AMSubject: Re: [xl7] program change question !Make sure the XL-7 track is set to "ext" and not "both". When a track is set
to "both", it filters out program change events from the MIDI output.
-Aaron
adamhertzano wrote:
> for some reason i am not able to switch patterns on my Quasimidi
> Ravolution 309 from the command station.
> The rest of my gear receives the program change messeges correctly.
> I seem to have set the correct routing for the "309" (which
> Corresponds to MIDI channels 1-5)and the track that contains the
> messege is lit.
> ! - The Ravolution i= also set to receive program Change
> - (RXProg - ON)
>
> Apreciate if anyone could who own a ravolution 309
> ( along with an XX-7) could check it out and let me know whats
> shaking between these /boxes...
To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.