I agree with andrew. the only other thing worht mentioning is the encoder is soldered on the top and bottom of the circuit board so desoldering it is somewhat annoying. other than that it is quite easy. i replaced two of them last year (xl7 and proteus 2000) with minimal soldering experience
On Sat, Sep 27, 2014 at 8:30 AM, Andrew Mansfield Alan_mansfield@... [xl7] <xl7@yahoogroups.com> wrote:
Try cleaning it first; that sometimes fixes it. Otherwise, it is a simple repair if you or someone you know is handy with a soldering iron.To: xl7@yahoogroups.com
From: xl7@yahoogroups.com
Date: Sat, 27 Sep 2014 00:44:55 -0700
Subject: [xl7] Main Jog Wheel
Wanted a sanity check before I go ahead and order stuff.
The main wheel on my MP-7 and Proteus 2000 both suffer from jumping erratically when moving quickly, so am looking at replacing them.
From what I understand, I can order a couple of them from below, then just desolder the old ones, and add the new ones on? (I won't do it, but I have tech mates who can do the work no probem)
Anything I should be aware of?
Data Entry Control-Rotary encoder | E-Mu Parts | EPR Electronics - Palm Harbor, FloridaData Entry Control-Rotary encoder | E-Mu Parts | EPR...E-mu data encoder for Proteus 2000Preview by Yahoo
Attachments
- No local attachments were found for this message.