---In xl7@yahoogroups.com, <ricard2010@...> wrote:
Neither, it's the pattern trigger mode, whereby you can select predefined pattern numbers using the track buttons. It's much faster than trying to hit the right pattern no with the wheel and pressing enter.
---In xl7@yahoogroups.com, <smw-mail@...> wrote:
Are you talking about arp trigger mode or track mute/unmute mode?
If arp trigger mode, I'd check the trigger settings--the light coming on and then going out seems more like the trigger is in unlatched mode.
Steve
If arp trigger mode, I'd check the trigger settings--the light coming on and then going out seems more like the trigger is in unlatched mode.
Steve
--- In xl7@yahoogroups.com, <ricard2010@...> wrote:
>
> Lately I have been starting to use the pattern trigger mode, whereby you can trigger patterns from the 1-16 buttons. This mode seems to be slightly buggy in various ways. Anyone else notice the following:
>
> - Occasionally when switching to a new pattern, then switching to track mode, a track LED will not light up for a track, even though the track is actually playing.
>
> - More seldom will the LED light up, but the track won't actually play. Attempting to press the track button in order to try and toggle the track on causes the LED to come on and go out as usual, but the track still doesn't play. Only after selecting another pattern and then back again does the track play again.
>
> - Sometimes the machine seems to get in a mode where the track selections are from the last time the pattern was selected, not the selection stored in the pattern. This one is really annoying, as once the machine gets into this mode I'm not sure how to get out of it. Once I had success changing patterns "normally", i.e. using the wheel, but I'm not sure if that's a sure-fire workaround or it just happened to work that time.
>
> Anyone else have problems with the above, and did you find a workaround or some way to get it working properly?
>