In the Emulator X3 manual pages 142 to 144 modulation cords. See modulation sources and modulations destinations. The LFO's are there. They can theoretically target or be targeted by almost any other parameter.
I didn't recheck to see if the Emulator X3 manual is in the file archives. Do you have it?
DF
I didn't recheck to see if the Emulator X3 manual is in the file archives. Do you have it?
DF
�
CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential and/or legally privileged information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication.
From: Matt
To: xl7@yahoogroups.com
Sent: Thursday, July 18, 2013 4:23 PM
Subject: Re: [xl7] lfo as a source in preset patchcords?
To: xl7@yahoogroups.com
Sent: Thursday, July 18, 2013 4:23 PM
Subject: Re: [xl7] lfo as a source in preset patchcords?
�
Preset patchcords (global) I don't see in the manual lfo as a modulation source
On Jul 18, 2013 3:53 PM, "D F Tweedie" <bienpegaito@...> wrote:
�Matt ...
I think there is an EmulatorX manual in the archives. The software certainly makes extensive use of LFOs for the patches and I'm pretty sure the same must be true in the hardware.
Are your referring to using the LFO with a patch cord to program or using the real time controllers to control a LFO?
Anyway, take a look at the EmulatorX manual as it has very clear and detailed descriptions of using LFOs and assigning them to patch cords.
DF�CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential and/or legally privileged information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication.From: Matt <somatt@...>
To: "xl7@yahoogroups.com" <xl7@yahoogroups.com>
Sent: Thursday, July 18, 2013 3:24 PM
Subject: [xl7] lfo as a source in preset patchcords?
�any info on this?