Given the fact that most devices don't propagate MIDI Clock to MIDI Thru outputs, I don't think it's feasible to get it working properly without another device, namely a MIDI interface with configurable standalone mode. If you don't use (and you don't plan to use) a 64-bit Windows system, eMagic AMT4 should do the trick for you on any Windows up to XP, as well as on Mac OS X. In standalone mode you have 32 user setups, where you can use connection matrix to do in-to-out mapping (no control over channel-based filtering or anything fancy), and you can even switch them using ordinary Program Changes on specific port & channel.
It is a second-hand gear, which - afaik - can give you headache under 64 bit Windows.
Bruno
It is a second-hand gear, which - afaik - can give you headache under 64 bit Windows.
Bruno
2013/6/9 nikitsanpsix <nikitsan@...>
I would like to do computerless true hardware setup. Ñomputer is used only for stereo recording. I dont want to do midi routing in software.
--- In xl7@yahoogroups.com, "steve_the_composer" wrote:
>
> Addendum: I tried looking for manuals for some of you gear to see what midi i/o/thru each has. I found lots of info, including synth engine capabilities and videos, but I did not find the midi i/o/thru details. (Possibly I looked at the wrong sites and I gave up too soon.)
>
> As best as I can tell, though, you do not have a midi router, though it seems as though you have 1 In and 1 Out on the focusrite and 1 In and 1 Out on the E-Mu 1x1 that might let you use the computer as a router. However, as a PC person, I don't know what midi filtering/routing software you would use.
>
> It seems to me that you could have the Virus going to your Mac with 1 Midi In, and your Novation going into the Mac with the other Midi In. If the Novation will pass midi data to the Mac via usb, you could have the KP3 going to the second Midi in of you Mac.
>
> So, with appropriate sofware you either have 2 in 2 out or 3 in 2 out routing capability (assuming you have Mac software that will do that).
>
>
> Virus --> Mac via focusrite
> Novation -->; Mac via 1x1
>
> Mac --> Mp7 via focusrite
> Mac --> KP3 via 1x1
>
> OR (if Novation can send midi to Mac via usb):
>
> Novation --> Mac via usb
>
> MP7 --> Mac via focusrite
> Virus --> Mac via 1x1
>
> Mac --> Mp7 via focusrite
> Mac --> KP3 via 1x1
>
> Would one of these two setups work for you?
>
> Also, if the virus rack has a thru, you could daisy chain a module to it.
>;
> Hope this helps.
>
> Steve
>
And yes Virus have midi thru.
As I understand you, I can connect novation via virus midi thru to mp7, But emu have only one midi in and i want record virus into mp7 too. that is my problem.
and for kp3, i only need send to it midi clock, i dont need use midi out from it.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/xl7/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/xl7/join
(Yahoo! ID required)
<*> To change settings via email:
xl7-digest@yahoogroups.com
xl7-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/